Add a CRTC property to request the VM to acquire/release
HW resources.
Display driver in trusted VM boots up without HW ownership. Set
the default value of the property as RELEASED to handle resource
assignments.
Change-Id: Iea651a2fea902d95d4b954052af4ef016af15a91
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Add a new hw catalog flag to indicate target support for
trusted VM. Currently, the flags is set for Lahaina target.
Change-Id: Idb56492758ef580673b2ebf44fecd577a2876f1b
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
VM switches during TUI usecase are expected to be seamless i.e without
display reset. In SDE language, this translates to respective display
drivers not tearing down the HW pipeline while releasing the HW.
In Primary VM, this taken care by keeping the DRM pipeline alive when
TUI is active.
In Trusted VM, since the client creates and destroys the display per
session, checks are needed to bypass the physical encoder disable(s).
Change-Id: Iac42f02806962405c9364b1ffed85778229977e9
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Trusted VM will be assigned MDSS HW access dynamically only on TUI
use case start boundary. So, any HW access during the boot sequence
will result in stage2 faults. But SDE driver initializes few HW
blocks during the boot up sequence. This change fixes them by either
skipping those accesses, if those registers expected to be programmed
by the Primary VM or postponing those accesses until the HW is
assigned.
Change-Id: Ic85238c5d734e9ac993072374c1b0ae661708fca
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
ICC frameworks may not be enabled for all the OS
environments. SDE is expected to work in the environments
where ICC paths are not defined e.g Trusted VM. Except
mnoc bus, SDE is keeping all the other paths optional.
This change adds mnoc bus to the optional list.
Change-Id: I1e3d31a3b0f49fb32041bc7e2192b014f6497267
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Adds a DT property to indicate trusted VM execution
environment and support catalog parsing for the same.
Add helper API to read the value.
Change-Id: I9194618b6f080119f1f15271a9b3c7edf938ca08
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Allow caller to specify the default value of the enum
property while installing with msm prop layer. It is
not always the case that the default value to be the
first entry.
Change-Id: Ie0bb1ad7479e3e07810b3d817fdf618b1935858c
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
QSEED scalar block HW revision is constant for a given MDSS revision.
Both SSPP and DS HW files invoke this API to read the revision register
at various points of time. Expose this revision information through
DT binding and maintain in the catalog to avoid repeated register
reads.
Change-Id: I95c0a5242cfda0aaa4ec5c2ff5c7cc0bed191b59
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Rename the property to qseed_sw_lib_rev to indicate that it
represents the qseed sw library revision that is compatible with
the targets qseed hw version.
Change-Id: I5a588dc20cf4a4f76f5c71301538bfc630ea220d
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Return ERR_PTR with -ENODEV when the USBPD module is not
enabled. This allows the DP driver to handle the failure
correctly and prevents any potential NULL pointer
dereferencing in the clean up path.
Change-Id: I4fbc559276bebe770a27935243a59c10c1bb5491
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Treating hw version as a signed int results in a negative
number when major version is more than 7, leading to errors
when comparing versions in the driver. Fix this by making
sure all HW version definitions and variables are unsigned.
Change-Id: Ic77183f85e5408092e05817cf95df5b0f0fcac75
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
SDE driver started supporting multirect mode with rect_1 only
configuration. In such case, master plane can not trigger
pipe fetch halt independently. This change removes the pipe
fetch halt check completely because it was only done for
master plane without buffer flip usecase. AXI fetch halt
provides similar functionality during idle power collapse
and suspend-resume.
Change-Id: I79d9d0eac2de95f1bb88561c7cc259e0cc4b2ca4
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Change IGC version to 4.0 to clearly indicate that support
for LUT 257 in DSPP is now supported and expected.
Change-Id: Ie3bb5b0150bdf6c332f86d0ae416b4f6fc42e70f
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
When CONFIG_DEBUG_FS is disabled skip creating root directory.
Change-Id: I97bed925392b781b73687164ca55e6cb09f951fc
Signed-off-by: Rajat Gupta <rajatgu@codeaurora.org>
Currently DP driver determines if a mode is DSC capable
based on a DTSI entry and the required number of DSC
to support it. This approach does not scale when there
is an overlap in DSC requirement between DSI displays
and external DP display, thus causing one of the display to
report modes that cannot be supported.
This change compares the resources reserved for DP driver
calculated at initialization time and the currently available
ones to determine the correct number of resources that DP driver
can use. It also adds DSC and topology filtering logic and moves
DSC hardware specific from DP driver to SDE driver.
Change-Id: I8e601de33422b7c6d786826f7bfe152c4af8a6b5
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Setup vig pipe makes an early return if csc and qseed are
not supported. This change moves addition of vig formats
before intializing qseed and csc.
Change-Id: I2eb651f7bbd81757a9de23501fda51a510d0e673
Signed-off-by: santosh <santoshkumar@codeaurora.org>
Modify the size of SID's passed as an argument during
scm call as per client requirement.
Change-Id: Idd3bb57a8f9e0a4e7eb6a23d96bfa5b68510063a
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Remove mutex unlock from msm_gem_get_iova_locked
as acquiring and releasing the lock are handled
in the caller function.
Change-Id: Ie4a8408d3e6308d19eb26aafee8dfe15bcb682da
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
During transition to cwb, kthread initialisation has to
be done for the corresponding encoder off work so that
the correct worker thread is used for this particular
work. There can be scenarios where a cwb commit is
received after a writeback session and the worker
associated with the off work is still assigned to
old crtc's worker resulting in a mismatch when
this work is queued. Add support to handle such
scenarios.
Change-Id: I6080025e799977827f4d0f4ab7eb93c6644f981e
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Enable dim layer event log to know the composition of all
blend stages in a commit from xlogs.
Change-Id: I387fd888f06f0c61d2042896459119d614b3f60b
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
This change checks max limit while allocating encoders
during display init.
Change-Id: I48736667c2b83f916f09f9e81cb1b24a9fef215a
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
In targets where ubwc is not supported, atomic check
should fail and return a error value if the input format
is ubwc.
Change-Id: I21a40f510cc852e64fbcc05a5fb4848da4b4faaa
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
framebuffer support is required in some use cases, so add
framebuffer emulation for KMS driver.
Change-Id: Icf0bbcd59ca430478d2bef4df033988d0338f2bb
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
This change adds dt based support for pm qos irq
latency instead of using hardcoded value.
Change-Id: I9f67ed1092eefac193a409773f841350532bc722
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Currently during rm_release, drm_conn is available only if connector
and encoder are bound together. If a test_only commit occurs
before a non-blocking modeset commit, this bound is uncertain.
The resources allocated by test_only commit will not be released
and leads to resource allocation failures for the consequent
commits. Add changes to modify this by checking for the encoder
attached to sde_connector which happens during bootup.
Change-Id: Icb1d9595efda8a104ba527175b2dbc6a2c856d44
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Primary and secondary dsi displays are built-in displays
and they are supported during all concurrency usecases
without resource allocation failure. DP mode filter
logic should provide supported mode information based
on free mdp resources after dsi resource assignment.
Change-Id: I3a9637a91ea1ffcc31997e25caff7f13605283ac
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Set the aborted flag during module initialization so the default
behavior is to error out on aux transactions. The flag will be
reset when there is a hot plug connect and a sink device is
actually present.
Change-Id: I9e31b9293e817ed951ba5464d403e7178615418f
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
This change addresses out of range and null checks in
sde driver.
Change-Id: I4ee82760ce3ee7053c336e49ec9eaae8b4c31b1e
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
In current driver if client did not reset system cache
crtc property, system cache write state is on forever and
breaks the system cache feature. This change restricts
entering into cache write state only if it's commit right
after idle notify. This change also adds event logs to
capture system cache feature state changes.
Change-Id: Ie46fc9113f752ed8989dab99301690a13003b00b
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Allow clients to reset the hdr meta data property even when
connector does not support hdr. This is required for shell stop
case cleanup when dp connector might be in disconnected state.
Change-Id: Ie0db61530216f1fab6c952933425259d32cfc834
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change allows the configuration where virtual plane is
staged without staging the corresponding master plane. Hw allows
such configuration and additionally during shell stop cases,
framework removes each staged plane one by one which requires
this configuration to be supported.
Change-Id: I85ce571dbbc148c069c2cf35cba55ad740d52b5d
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Lots of dsi FIFO error logs were printed into serial in
dsi ISR. It will make device stuck or deadlock. Remove
these logs from dsi ISR, and enable the log in FIFO error
workqueue handler.
Change-Id: I0e9b2312cb76d345ec5a9b9628c52b47d5163fde
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
