This reverts commit 7d3ecfd796.
This change had caused a regression with swr-haptics driver probe
as the soundwire master couldn't enumerate swr haptics. Revert
this until we can understand why soundwire enumeration fails.
Change-Id: Ie5840247013a1a3fab15758e9ace7b131619be49
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
request_firmware returns -EAGAIN failure if user space access is
disabled during reboot. Thus for BDF download failure check this
condition before assert.
Change-Id: Ib6c90b1a02763b216a474729c3191c8c05772af2
Signed-off-by: Manikandan Mohan <manikand@codeaurora.org>
Add sync_state functionality to remove threshold held
during initial boot up and clean up any linger proxy
resources that were voted for from bootloaders.
Change-Id: Icb9758075fa2af8f3bb658e8a4b033b213e16545
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Downstream arm-smmu impl, perform SYNC as part of unmap().
This is done under arm_smmu_tlb_inv_context_s1. This double the sync
operation. This impacts the unmap time, remove this duplicate sync
operation.
Change-Id: Ic98fc04a8102fe3a0b79e52b33daabf94732fcbf
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
This reverts commit fc44c0ba38 ("msm_rtb: Don't lose
the __user tag on relaxed reads/writes"). This causes
address parameter, with side effects, to be evaluated
more than once.
Change-Id: Ib37665763736bdf562afcc8335b014a2724a7598
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Add CLK_DONT_HOLD_STATE flag to avoid the framework from
placing a proxy vote to enable the clocks during probe since
these GPU clocks are failing to turn on as their corresponding
GDSC is not enabled yet.
Change-Id: I4771d1c5696a069d0d67d407de3a7a5b1f5b139e
Signed-off-by: Jagadeesh Kona <jkona@codeaurora.org>
Enable SMB5 and QG drivers which control the main charger and
Qgauge peripherals present on PM7250b.
Change-Id: I66925cdbefd160d09f221734d5b9f676f822fe8d
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Add support for "bms" power supply which is not present in kernel 5.4
through IIO device and properties under it through individual IIO
channels under the IIO device.
Change-Id: I55c44e5db2dc4549021cb429444c7c5afa679c3a
Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
SMB5 charger drivers and their helper files use several power supply
properties on msm-4.19 which cannot be supported on msm-5.4 due to the
need for GKI compliance. Add support for main charger to register
as an IIO device with individual channels under it corresponding to
missing power supply properties from msm-4.19.
Change-Id: I7182160258fa2ebd4af36b0531b11d988cffdbd3
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
sdxlemur will have at most 1GB of DDR, so allow all of it to be
mapped as lowmem instead of enabling CONFIG_HIGHMEM.
Change-Id: I89148d18e0be0c1d99795b7f49184bb5421af0f1
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
When force FW assert, it should use RDDM timer instead of FW
boot timer since it expects FW entering RDDM mode.
Change-Id: Ic8498b0f3c23dc494267571da7f627eace9f91bd
Signed-off-by: Yue Ma <yuem@codeaurora.org>
When serial driver is present in second stage ramdisk, it takes ~5 sec to
init the UART. All the data bufferred till then will have to be put onto
the console taking a console lock and this causes a watchdog bark. To
avoid this watchdog issue, disable the console. This also disables early
console.
Change-Id: Ibded81922cb735e3035fc960258213c4de1d6a74
Signed-off-by: Prakruthi Deepak Heragu <pheragu@codeaurora.org>
MMRM interface is used to do admission control of
specific resources (eg: clock) of multimedia clients
(camera/display/video/cvp).
Change-Id: Ife92d31ab08c80c06467771e74d05ab1a9a8a54b
Signed-off-by: Shivendra Kakrania <shiven@codeaurora.org>
SVM going to rely on kernel autosleep feature to do suspend-to-RAM.
Enable required configurations to achieve suspend-to-RAM functionality.
Change-Id: Ie31abce7927c8b6b2ce5dad6f917f96c52e90803
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Configure dbl and msgq interrupts as wakeup capable to wake up the SVM
from suspend-to-RAM state.
Change-Id: I1825109736ace36c5c871d52dfefe4a320fea335
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
This change enables CONFIG_NL80211_TESTMODE config for
wlan host driver in holi.
Change-Id: I0974f58a2f25c14991ff4a22b998827b0a579b95
Signed-off-by: Sandeep Singh <sandsing@codeaurora.org>
