Shyam Kumar Thella
8bfdbcbc36
dt-bindings: iio: add IIO channels for smb1355 parallel charger
...
Add IIO channels required by smb1355 parallel charger device.
Change-Id: If13e445dd2d1ed8f90e17a43432858348b3c1c00
Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
Signed-off-by: Ashish Chavan <ashichav@codeaurora.org>
2020-09-22 15:11:07 +05:30
Ashish Chavan
6166aaf062
power: battery: Fix parallel charger iio-channel names
...
Get IIO failure may occur due to parallel charger's iio-channel
names conflicting with main-charger/qg channels. Fix this by adding
"pl_" prefix for all parallel charger's iio-channels name.
Change-Id: I20cb8f984b38d7053890380ea024a2ef15cf5789
Signed-off-by: Ashish Chavan <ashichav@codeaurora.org>
2020-09-22 15:10:58 +05:30
qctecmdr
c55c540878
Merge "soc: qcom: Add a die notifier for qcom watchdog"
2020-09-21 00:15:06 -07:00
qctecmdr
c0c76e1d77
Merge "dt-bindings: input: touchscren: add description for synaptics_dsx"
2020-09-21 00:15:06 -07:00
qctecmdr
b44e32c8f5
Merge "rpmsg: glink: Append glink irq name with remote edge name"
2020-09-21 00:15:06 -07:00
Deepak Kumar Singh
4ad4c3678c
rpmsg: glink: Append glink irq name with remote edge name
...
Glink irq for all the remote edges are registered with same name
glink-native. It is difficult to distinguish each irq in logs.
Appending remote edge name to generic irq name.
Change-Id: I6ead87e0e4adae204535b599d07d9471387c861b
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
2020-09-20 21:39:26 -07:00
Ravikanth Tuniki
9fed4d8bdd
dt-bindings: input: touchscren: add description for synaptics_dsx
...
Add new file for synaptics_dsx touchscreen drive IC.
Change-Id: I92e089bfad8736e286fd308e98b5b5daf5fefeed
Signed-off-by: Ravikanth Tuniki <rtunik@codeaurora.org>
2020-09-20 20:51:28 -07:00
Linyu Yuan
a95ce1f890
usb: misc: nb7vpq904m: remove panic operation
...
it is an empty function.
Change-Id: I6b34ea0280f30169e93c819d037c323dcf1f8bee
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org>
2020-09-21 11:34:22 +08:00
qctecmdr
febeb7a60c
Merge "cnss2: Remove 0 MSI data check"
2020-09-20 08:04:09 -07:00
qctecmdr
12ac06dbe2
Merge "usb: misc: nb7vpq904m: remove register read operation"
2020-09-20 08:04:08 -07:00
qctecmdr
fe8c0cb810
Merge "usb: dwc3-msm: Clean up gsi_prepare_trbs()"
2020-09-20 08:04:07 -07:00
qctecmdr
cc6e26a7fe
Merge "defconfig: msm: Enable pinctrl-yupik driver"
2020-09-20 08:04:06 -07:00
qctecmdr
2395f4189c
Merge "input: touchscreen: synaptics_dsx: Fix Propagation"
2020-09-20 02:12:31 -07:00
qctecmdr
662c5c0839
Merge "input: touchscreen: Enable Synaptics DSX touch driver"
2020-09-20 02:12:30 -07:00
qctecmdr
5ccc883e1d
Merge "ANDROID: lkdtm/usercopy: Use __va_function to find proper vm_mmap address"
2020-09-20 02:12:30 -07:00
qctecmdr
c9e3e8d236
Merge "msm: kgsl: Fix DMA API warning while dma_buf_map_attachment()"
2020-09-20 02:12:30 -07:00
qctecmdr
94186423ce
Merge "icnss2: Add vbatt feature code for holi"
2020-09-20 02:12:29 -07:00
qctecmdr
5e862167df
Merge "cpuidle: lpm-levels: Core isolation check to get PM QoS latency"
2020-09-20 02:12:29 -07:00
qctecmdr
f2918b8a6e
Merge "drivers: thermal: qmi_sensors: Add MSM_SKIN_THERM qmi sensors"
2020-09-20 02:12:29 -07:00
qctecmdr
bba4d8f645
Merge "msm: kgsl: Skip DTCM and NMI if SMMU is stalled"
2020-09-20 02:12:28 -07:00
qctecmdr
aab4a9f9c3
Merge "arm: defconfig: Enable RPMH clock driver for sdxlemur"
2020-09-19 23:25:49 -07:00
qctecmdr
8c40d56db2
Merge "msm: adsprpc: remove redundant check for static PDR handle"
2020-09-19 23:25:48 -07:00
qctecmdr
8290f255fc
Merge "aarch64: defconfig: Cleanup the lahaina_GKI.config"
2020-09-19 23:25:48 -07:00
qctecmdr
e28ee47706
Merge "cnss2: Initialize params for error path"
2020-09-19 23:25:48 -07:00
qctecmdr
f81e2b21f7
Merge "kernel: time: Restore original wheel index calculation"
2020-09-19 23:25:48 -07:00
qctecmdr
1ba8da95ea
Merge "soc: qcom: msm_glink_ssr: Notify on powerup failure"
2020-09-19 23:25:47 -07:00
qctecmdr
a88dee55bd
Merge "Revert "iommu/arm-smmu: Add support to disable page-table coherency""
2020-09-19 23:25:47 -07:00
qctecmdr
7d2d40a830
Merge "defconfig: lahaina-gki: disable the fixed regulator driver"
2020-09-19 20:35:23 -07:00
qctecmdr
d8a075511d
Merge "iio: qcom-spmi-adc5: Handle EOC properly"
2020-09-19 20:35:23 -07:00
qctecmdr
e7d08db3d3
Merge "power: supply: qti_battery_charger: Handle probe failure gracefully"
2020-09-19 20:35:23 -07:00
qctecmdr
df9d0dbc9a
Merge "leds: qti-flash: Enable zero brightness symmetry distribution"
2020-09-19 20:35:22 -07:00
qctecmdr
498879b848
Merge "cnss2: Avoid dereferencing pointer before NULL check"
2020-09-19 20:35:22 -07:00
qctecmdr
185f5e9c52
Merge "defconfig: Disable USB_CONFIGFS_RNDIS for Lahaina/Holi QGKI"
2020-09-19 20:35:22 -07:00
qctecmdr
29a9d28c82
Merge "FROMGIT: mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary"
2020-09-19 17:55:21 -07:00
qctecmdr
5f6aa13587
Merge "iio: adc: Add support to read parallel charger current channel"
2020-09-19 15:11:25 -07:00
qctecmdr
32113d11a3
Merge "i2c-msm-geni: Register suspend_late instead of suspend_noirq"
2020-09-19 09:09:16 -07:00
qctecmdr
d09483fe6c
Merge "soc: qcom: spss_utils: IAR 3rd party uefi app"
2020-09-19 09:09:16 -07:00
qctecmdr
9d79203950
Merge "defconfig: Enable Synaptics DSX Touch for holi target"
2020-09-19 09:09:15 -07:00
qctecmdr
8ccd500ed6
Merge "input: qpnp-power-on: Fix the argument data-type for regmap_bulk_read"
2020-09-19 09:09:15 -07:00
qctecmdr
5636c8bedc
Merge "msm: kgsl: Add IOMMU clocks for SA8155"
2020-09-19 09:09:14 -07:00
qctecmdr
8c0cae110c
Merge "mhi: core: Add checks for bhie offsets"
2020-09-19 09:09:14 -07:00
qctecmdr
a2998ad434
Merge "dt-bindings: clock: Add support for APSS clock ids for SDXLEMUR"
2020-09-19 09:09:14 -07:00
Vivek Pernamitta
e80749a2a5
mhi: core: Add checks for bhie offsets
...
Return immediately if device returns an invalid BHIE offsets.
Change-Id: I2fd8fe73e47b28b1b212284c02e5c9c857805461
Signed-off-by: Vivek Pernamitta <vpernami@codeaurora.org>
2020-09-19 01:29:32 -07:00
Guru Das Srinagesh
635d29685d
leds: qti-flash: Enable zero brightness symmetry distribution
...
Currently, when a single channel's brightness is set, and then cleared
to zero subsequently, the LED stays on instead of getting turned off
because symmetrical brightness distribution logic does not allow the
paired channel's brightness to be set to zero. Fix this.
It was also observed that the brightness of a channel that is getting
turned off doesn't show up as zero, so fix that as well.
In addition, strengthen error-checking of the "qcom,led-mask" device
tree property.
Change-Id: I245ec2177b2ebe0f567eb96397dd13a05a587d60
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
2020-09-18 18:20:00 -07:00
Manikandan Mohan
d14fbadbf7
cnss2: Initialize params for error path
...
Update driver to initialize and do null checks for variables in
error path.
Change-Id: I4b012d856decd02dcc3e82d13213ddd529838e98
Signed-off-by: Manikandan Mohan <manikand@codeaurora.org>
2020-09-18 13:05:49 -07:00
Naveen Yadav
8d0cb02471
dt-bindings: clock: Add support for APSS clock ids for SDXLEMUR
...
Add clock IDs for APSSCC clients to be able to request for clocks
from these clock controllers.
Change-Id: I284beb3b62a4f5c4521c7e7e0f9d068c469a85bb
Signed-off-by: Naveen Yadav <naveenky@codeaurora.org>
2020-09-18 19:28:07 +05:30
Amir Samuelov
f19ffc2867
soc: qcom: spss_utils: IAR 3rd party uefi app
...
Set saved cmac on ioctl from user space.
Write saved cmac to shared memory on SSR.
Read calculated cmac from shared memory.
Provide calculated cmac to user space via sysfs.
Cleanup unused IAR-STATE fuses.
Cleanup unused IAR-FEATURE-ENABLED fuse.
Read actual PIL area size from register.
pbl_cmac_show() returns binary rather than string.
Change IOCTL to use variable-size-array.
Change-Id: Ic4ea38685f6b9d1100a28bd958e44f513373fea9
Signed-off-by: Amir Samuelov <amirs@codeaurora.org>
2020-09-18 04:46:02 -07:00
Neeraj Upadhyay
047ca2390b
soc: qcom: Add a die notifier for qcom watchdog
...
To give sufficient time to die notifier to complete
their work, add a watchdog die notifier, to reset the
watchdog. Also, increase priority of watchdog panic
notifier and make minidump oops notifiers run after
watchdog oops notifiers.
Change-Id: Ifc53cc5c3b1ecc1554a971b9f2334319cad62bfd
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
2020-09-18 12:23:57 +05:30
Neeraja P
9c75620b1e
msm: kgsl: Fix DMA API warning while dma_buf_map_attachment()
...
The dma_get_max_seg_size() returns a default value of 64k when dma_parms
are not allocated. When CONFIG_DMA_API_DEBUG_SG is enabled and the
requested size is more 64k, it triggers a warning as below.
[ 25.468427] c6 754 kgsl kgsl-3d0: DMA-API: mapping sg segment longer than device claims to support [len=2097152] [max=65536]
[ 25.480236] c6 754 WARNING: CPU: 6 PID: 754 at kernel/dma/debug.c:1302
[ 25.497971] c6 754 Kernel panic - not syncing: panic_on_warn set ...
[ 25.714532] c6 754 Call trace:
[ 25.717938] c6 754 dump_backtrace+0x0/0x200
[ 25.722598] c6 754 dump_stack+0xb8/0xf0
[ 25.726897] c6 754 panic+0x160/0x44c
[ 25.730934] c6 754 trace_raw_output_cpuhp_multi_enter+0x0/0xf4
[ 25.737284] c6 754 report_bug+0x114/0x1b8
[ 25.741756] c6 754 bug_handler+0x28/0xa0
[ 25.746146] c6 754 brk_handler+0xac/0x1d0
[ 25.750622] c6 754 do_debug_exception+0x88/0x188
[ 25.755722] c6 754 el1_dbg+0x18/0xa8
[ 25.759757] c6 754 debug_dma_map_sg+0x1e4/0x694
[ 25.764768] c6 754 ion_map_dma_buf+0x318/0x428
[ 25.769693] c6 754 dma_buf_map_attachment+0x68/0xbc
[ 25.775063] c6 754 kgsl_setup_dma_buf+0xec/0x3b0
[ 25.780160] c6 754 kgsl_ioctl_gpuobj_import+0x498/0x914
[ 25.785879] c6 754 kgsl_ioctl_helper+0x11c/0x14c
[ 25.790983] c6 754 kgsl_ioctl+0x30/0xa8
[ 25.795283] c6 754 do_vfs_ioctl+0x66c/0xa14
[ 25.799941] c6 754 __arm64_sys_ioctl+0x7c/0xb0
[ 25.804865] c6 754 el0_svc_common+0x98/0x1d8
[ 25.809609] c6 754 el0_svc_handler+0x5c/0x64
[ 25.813205] c5 1 F2FS-fs (sda19): Start checkpoint disabled!
[ 25.814359] c6 754 el0_svc+0x8/0xc
This warning can be fixed by allocating the dma_parms and setting the
max_segment_size.
Change-Id: I721858eadbe3588b4f5be0a0a73c428869c8e5de
Signed-off-by: Harshitha Sai Neelati <hsaine@codeaurora.org>
Signed-off-by: Neeraja P <neerp@codeaurora.org>
2020-09-18 11:42:18 +05:30
Linyu Yuan
49edb9f93d
usb: misc: nb7vpq904m: remove register read operation
...
each register contain one parameter,
there is no need to read register before write,
it can improve time when change a mode.
Change-Id: Ifc9e7fd1f9bf9c6a048308dcc0cc2a476d1fc2d4
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org>
2020-09-18 12:18:18 +08:00
