Move some stats from tgt_mc_cp_stats_extract_vdev_summary_stats
and target_if_cp_stats_extract_vdev_chain_rssi_stats, from kernel
to driver
Change-Id: I3475421828b51a229af4ac3ff6087d7ebb311c33
CRs-Fixed: 2430565
Add change to cleanup duplicate fields of
of vdev_mlme, which are also in mlme_channel_param
and their dependencies while updating
vdev_start_param. Cleanup unused mlme_cfg_ids.
Change-Id: Ie32971283a337f04692c0c0bc7f41fff75c090c3
CRs-Fixed: 2407953
On low memory system, skb allocation failures are observed in
dp_tx_ipa_uc_attach during driver loading phase. Per kernel
memory team analysis, failures are caused by large amount of
atomic allocations. Currently when allocating IPA TX skbs,
srng spinlock is first grabbed and then skb buffers are being
requested, which makes skb allocation happen in atomic context.
Fix is to make skb allocations with srng unlocked since it is
safe for race conditions during driver loading time. This ensures
skb allocations in process context.
Change-Id: I1624276c087c8247d672fb7cea5daded07ab93a3
CRs-Fixed: 2426489
The correct element number of param_tlvs->stats_per_channel_list is
actually param_tlvs->num_stats_per_channel_list and thus the
qdf_mem_copy() can actually copy more bytes than are in the buffer
causing a buffer overread.
Fix it by checking fix_param->num_channels against the actually
param_tlvs->num_stats_per_channel_list before doing memory copy.
Change-Id: I610920ac1d0a927a52de83935616e8e8fdfec7e7
CRs-Fixed: 2428212
Since umac cmd is specific to the module adding cmd to serialization
queue, an API is needed to validate the umac_cmd associated with that
serialization context holding the serialization queue lock.
Change-Id: Iadb4deb17ffabd780432a29e7cbd37024fd431fe
CRs-Fixed: 2430764
Count of MSDUs Tx with AMPDU aggregation and
MSDUs without AMPDU aggregation is maintained. This
count is obtained from per ppdu stats.
Change-Id: I7c38846534bbe5f2fd0a9b3602a9d453e1c1f449
Add change to support sending AMPDU/AMSDU custom aggregation
size to FW using converged MLME and target_if framework.
Change-Id: Icf665e3bf30c5ef5903342264e89776611c7774a
CRs-Fixed: 2430278
Set MaxMsgsPerBundledRecv in HTC_SETUP_COMPLETE_EX_MSG for USB,SDIO
interfaces.
This is required for enabling RX bundling.
Change-Id: Ifb6a9a7167701c051d405bfae125fcfd0c8c55c5
CRs-Fixed: 2414409
currently host will dump TLV with info level if HW indicate RX
data with invalid sw_peer_id, this will introduce excessive logging
issue, host panic.
degrade the log level to debug level.
Change-Id: Ia24f411bdfd9ec8e315874340d3bf046c245a72b
CRs-Fixed: 2420640
Remove usb_set_intfdata() as usb interface private data is not being
used in driver.
Change-Id: I65f718b8abe2f33ec7f180ec265baab9772d30d0
CRs-Fixed: 2427944
Move get macaddr from peer API at appropriate place instead of fetching
it everytime and not using it.
Change-Id: I01349a672215395795cd08cd65d98ad8a08b95b0
CRs-Fixed: 2431163
Add support to measure interrupt latencies, store them
in different "bins" and display the constructed histogram
through user command.
Change-Id: I268be6b39745d550ac7db5d321c2d1fdb2d17d41
CRs-Fixed: 2365812
When the status is FLOW_POOL_ACTIVE_PAUSED, all queues are expected to
be paused. Still some on the fly packet can make it to the driver. In
such a case, the function dp_tx_desc_alloc takes a default action of
WLAN_WAKE_NON_PRIORITY_QUEUE. This is incorrect, since it will wake all
non priority queues, when they should be paused.
Make default action as WLAN_NETIF_ACTION_TYPE_NONE. If this is the
action to be taken, donot call the pause_cb from dp_tx_desc_alloc.
Rate limit log levels in case dp_tx_desc_alloc fails.
Change-Id: I1ef3018e90576d2c3aaa0d10d56e9b155681271b
CRs-Fixed: 2421813
Add a new beacon tx rate code id to send rate code to fw instead of
sending beacon tx rate
Change-Id: I8cfe6024b9adf4b25c8686e837c94b86dddceab5
CRs-Fixed: 2428706
In some cases, the msdu_len as retrieved fromm msdu_start TLV is
greater than RX_BUFFER_SIZE. In such cases, when qdf_nbuf_set_pktlen
is called, it will expand the skb to accommodate the bigger packet.
This makes the rx_tlv_hdr var invalid, since it continues to point to
the older skb->data. Access of this rx_tlv_hdr will cause exception.
Drop the packet if msdu_len > RX_BUFFER_SIZE. This is not expected while
reaping WBM RX Release ring.
Change-Id: I60890e4d3ee0afa451884d4df458eb50be280280
CRs-Fixed: 2426245
Filter out data packets from mon destination
ring in m_copy mode as we already receive
first 100 bytes of data in mon status ring
Change-Id: I09321aa42b850d7b3cdc0bda4c7c51f79a6f850e
In epping_enable bmi_done is called with null context due to which
bmi finish is incomplete
Pass BMI Context before invoking bmi_done and bmi_cleanup
Change-Id: Ic7f424a03cb92d6d3218b5fa148ea95d6011cfed
CRs-Fixed: 2419720
Currently capability information and RX multicast broadcast
packet count of the connected peer is not getting
cached.
Add support to cache the capability info from assoc request and
RX multicast broadcast packets from FW.
Change-Id: I105e055b1e440852e8e6b508c25e45f79db2d062
CRs-Fixed: 2409521
In wlan_crypto_rsn_info, only need to reject STA with PMF disabled
when PMF is required.
Change-Id: I7a7d4b2d1a2d44a95d08eb6bfac14540940f0be3
CRs-Fixed: 2424932
Currently only STA mode is supported in wlan_crypto_set_del_pmksa.
For SAE SAP, need to add AP mode support in this API.
Change-Id: If45a516713e302b3516d163516263bbcbafeaed2
CRs-Fixed: 2424893
IPA driver adds is_txr_rn_db_pcie_addr and
is_evt_rn_db_pcie_addr in ipa_wdi_pipe_setup_info and
ipa_wdi_pipe_setup_info_smmu structure to check if doorbell
address is DDR address or PCIe memory mapped address. Thus
set the addr flag accordingly for IPA transfer and event
rings.
Change-Id: Ia55d14535db3818439e3884cfb61c3a1d81b86fb
CRs-Fixed: 2422162
Fix the typo for PROFILE_IDX and also add WMI macros
for short slot time update under MLME.
Change-Id: I3c09a7f01029af0f075086166be1c85bd1d7de34
CRs-Fixed: 2412160
If both INI and FW capability is set,
enable capability flag in twt enable command.
Change-Id: I1c070256c4b672b09a1323665fc5a2f166f951fb
CRs-Fixed: 2423718
At the time of dp vdev registration, register tx completion
callback so that tx completions will be called for packets
whose tx completion is requested.
Change-Id: Ic3402f41a0962111901271fc8669974dfea2eb1c
CRs-Fixed: 2416554
MCL code will need to find the supported mgmt cipher
type from crypto component. Add two api for vdev and
peer for it.
Change-Id: Ic33d4f18a04b48ce4699617569585fd1c2ae6f61
CRs-Fixed: 2421463
In the current implementation, qdf nbuff replenish timer apis
invocation is controlled by macro CONFIG_MCL. So replace the
CONFIG_MCL with new flag FEATURE_NBUFF_REPLENISH_TIMER.
Change-Id: I8231483b791edf25c08ec4a794b5cc7b638daec7
CRs-Fixed: 2421538
Modify the comment to avoid the use of restricted words in the
wmi_unified_param and service_ready_param
Change-Id: I50f474bdeed6cfdfd05f0c4bff5bb0c0ed56127f
CRs-fixed: 2427333
Change I498ac1f8cd1d6423032d7b3b8c233656c5f0bf22 ("qcacmn: Have separate
macros for DA/PO/FO to reduce the code size") introduced featurization of
the DFS logic. Two functions, target_if_dfs_reg_offload_events() and
dfs_fill_emulate_bang_radar_test(), were not correctly featurized,
resulting in compilation failures when WLAN_DFS_FULL_OFFLOAD is not
enabled. To prevent these failures properly featurize the functions.
CRs-Fixed: 2366596
Change-Id: I4bcecf95d92cb3ebe2ff893c17755385dda11429
Not typecasting 64bit value to 16bit value before assigning is causing
corruption of nearby structure members. Typecasting this value fixes
this corruption.
Change-Id: Iddaf697eb90241f9948aeaafe7985b8c2ea63048
Currently, the vdev connection status is checked by getting
the bss peer of that vdev, and if the bss peer is in associated
state then vdev connected status is sent as true. It can happen
vdev is present and bss peer is deleted after getting the bss peer
from vdev pointer. Then bss peer can not be dereferenced to get the
its status.
Instead remove all the duplicate api's tdls_is_vdev_connected,
pmo_core_is_vdev_connected, and wlan_vdev_is_connected with
wlan_vdev_is_up. wlan_vdev_is_up gives success status
if associated.
Change-Id: I863c3c0689f329870bd08c813813c16956135209
CRs-Fixed: 2426092
Modify aging timout in reo based on access category
to match cascade.
For BE, BK, VI use 100ms and VO uses 40ms.
Change-Id: I09267b6540460a13728bddc92a7e72157d6ce569
Crs-fixed: 2418294
There is an assert inside the serialization timer cb.
This timer cb can also be called in the scheduler context.
So if we get a scan cancel request, it is posted to scheduler
and after that command timesout, the timer cb is posted
to the scheduler.
So first the cancel is executed and the command is removed.
After that, the timer handler is executed which will find timer->cmd
to NULL.
So, by the time, the timer handler is involved in scheduler context
the command might be cancelled so we return an error when cmd is null
in timer handler cb.
Change-Id: I03651a63de88fe5c6467c5783254ffd006c663d2
CRs-Fixed: 2427323
In roaming offload, PMK will be sent to firmware.
So,save the PMK to pmkcache when supplicant provide
from os interface.
Change-Id: Ibfd3d354b9150b40755ba2ab1dd90c2e3c6ddbc3
CRs-Fixed: 2420359
peer attach failed due to memory allocation failure
which triggered soc restart, as part of soc restart
peer detach tried to free AST hash table and entries
which was not allocated.
For peer hash table and AST hash table free only if
the memory is allocated
CRs-Fixed: 2425963
Change-Id: Ib7a624c91f544f1a8da2b96b4d342a13b9f3b162
Get the tx_leakage_threshold value directly in
tgt_dfs_set_tx_leakage_threshold from
ucfg_mlme_get_sap_tx_leakage_threshold instead
of passing from wlan_hdd_cfg80211_start_bss.
Change-Id: If8f5b85c03c01b984b7c05d72d40baca0e19c3cc
CRs-Fixed: 2418358
