Prints the dp delay histogram on peer basis. This stats
are print as part of the fc_peer_delay command.
Change-Id: I9be971f5b5aa42f40741ee403a0f82dae97981c3
Allocate/Deallocated the peer extended object in the
peer_create() and peer_del() paths respectively.
Change-Id: I3e93e1ec85aefb22d3fb40d1b01bbd07d660aff5
Setband changes require support for 6G band. Using a bitmap
better supports the addition of new bands. Changes to support
this include:
1. Update band_capability in regulatory pdev priv obj
to be a bitmap.
2. Add API to convert between the bitmap and
enum band_info.
3. Update channel list modifying function to include
case for 6G band.
4. Update the get and set APIs to use uint32_t instead
of band_info.
Change-Id: Iff38fdd7cc540a0e471647de349d7fa57b3a8467
CRs-fixed: 2726285
This commit introduces the vendor command to get the configured band
through QCA_NL80211_VENDOR_SUBCMD_GETBAND.
Change-Id: I3f3de10a3bd32eda2634b400d5191bf67a46eaaa
CRs-fixed: 2729768
This commit defines a new vendor interface
QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT to configure TWT.
Change-Id: I077c26e56dccbcead9d5e770700813b65bb8aff4
CRs-fixed: 2729753
Also introduce a new attribute QCA_WLAN_VENDOR_ATTR_SETBAND_MASK
to carry this new bitmask enum. This attribute shall consider the
bitmask combinations to define the respective Band combinations
and substitutes QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE.
Change-Id: Ib00d93147e19593f24bd317c3962e6454e4eafc2
CRs-fixed: 2726283
Remove reg_get_curr_band because it has the same functionality
as reg_get_band.
Change-Id: I7fa5abfe6a552cc617cd810b41b152c70b3429b8
CRs-fixed: 2726300
Add fisa_sw_ft entry member to hold the cumulative non head
frag lengths. This is used to do head_skb->data_len sanity check.
Change-Id: Ied65327c027dd60357ed1dc062655bfb903a12bb
CRs-Fixed: 2728319
Compute correct channel width for a given frequency by calling
the regulatory channel bonding API.
Change-Id: I3627bc2a4f4c832887447bd6b28abd3432bffa73
CRS-Fixed: 2728810
In regulatory offload case; customer may be using his own
customized regdb. In that case, the host regdb can be different
from firmware regdb. Therefore, reduce the log level.
Change-Id: I165745bd5cb22fe95ae96f387db4d65e39f446ec
CRs-Fixed: 2728587
Remove uncessary msdu count check against msdu count in
mpdu desc info while processing REO Rx err pkts.
As per h/w team msdu count can be obtained from msdu link
desc instead of mpdu desc info.
SOC level Rx err stat rx.err.msdu_count_mismatch is
incremented to log this condition.
Change-Id: I4f7d2df7335778f2f2d28e542da17fc7f6970009
CRs-Fixed: 2729693
In case of MBSSID, fils or 20tu unsolicited probe response frame
is required to be sent only by the tx-vdev. 20tu frames (fils or
probe response) sent by the tx-vdev carries the specified information
about the non-tx vdevs.
Currently, fils_enable wmi cmd is being sent by default to fw at
vdev_up of each vdev. Avoid sending this cmd in case of non-tx
vdev in MBSSID mode.
Change-Id: I6d6f85489baf34b282f012227f211388647fdb4e
CRs-fixed: 2727143
FW keeps adding members to htt structure. In order to avoid overflow,
align host tlv structures similar to fw tlv structures and also
validate size of htt_stats tlv before memcpy.
Change-Id: I4719804cd1e65ad14dfcee36685ee2a4ae4f2379
CRs-Fixed: 2700191
Ensure that the IE pointer is not dereferenced if the pointer
passed to the function is NULL.
CRs-Fixed: 2724504
Change-Id: Ie6b4c633e252de5162c9f7ab72c2ea4a2cc058dd
Issue: Currently, host doesn't validate pkid_count
before populating data in rsn->pmkid. rsn->pmkid array
can store only 4/MAX_PMKID pmkids which may cause OOB
write if host tries to copy pmkids more than MAX_PMKID.
Fix: validate pkid_count before populating rsn->pmkid
and return Failure in case pkid_count becomes greater
than MAX_PMKID to avoid OOB.
Change-Id: I211ea791a52ecb84872d139929f999a89db240d5
CRs-Fixed: 2724407
Use dfs channel structure to store autoswitch channel instead
of a single frequency value.
CRs-Fixed: 2726427
Change-Id: Ib592b75d4f87b4597510a1fc32717633b2b39e21
hif_ahb_enable_bus returns -EIO, PTR_ERR and QDF_STATUS. PTR_ERR can
return zero for NULL. This will get interpreted as success resulting in
invalid access later. Fix return status to QDF_STATUS so that caller can
cosistently use error codes for error handling.
Change-Id: Ibd4d6e52c930272febf9a8b76bcfd2df4a4a4705
CRs-Fixed: 2726180
Pointer 'hif_ctx' returned from call to function 'cds_get_context'
may be NULL. Check for NULL pointer before de-referencing it.
Change-Id: I6c909b2c62e1bf6945a4cc40315e8fdad4a0aa83
CRs-Fixed: 2726335
wdi event handler take host pdev id. Convert lmac/target pdev id to host
pdev id for wdi event handler.
Change-Id: Iaf1f3e77055be0178d810d960924ca618b334fd2
Currently for qdf trace api data type of code is uint8_t, some of
the modules are inserting message id of type uint16_t because of
which some information is getting lost and post processing cmm
script is not able to parse these messages correctly.
To address above issue, change the data type of code for
qdf trace function.
CRs-Fixed: 2719767
Change-Id: I4461dc9c2f45e691317d318870dfdbce93929e12
a. Enable DDMA support and FFT bin length adjustment SWARs
b. Similar to QCN9000,
Skip 16 bytes of unused padding added after Spectral summary report
FFT report header length is 24
Change-Id: I870f198511771dccbb0300ff62fc15ab0d64ee7f
Add INI support for peer extended stats. The extended
stats as of now include per peer Tx/Rx delay per packet
path.
Change-Id: I20d3c7f81f65f4db5f111eb103945151a8cd83aa
Cleanup the code to fix the compile error while setting
CONFIG_REMOVE_PKT_LOG=y & CONFIG_WDI_EVENT_ENABLE=n
with Hasting
Change-Id: I493fbddec865fe20789022445b0f155201772119
Remove unused filter params from scan filter. Also
change the type of few, to decrease the memory required.
Change-Id: I3f86d416805174b56c8998f5a4a4723d9ebdd90b
CRs-Fixed: 2723220
Define a new vdev param to set corresponding bit to enable/disable
a particular NAN feature.
Currently, Framework configures NAN DW as 4 seconds when the
device is in sync role and the screen is off. But customers might
want this to be 512ms always irrespective of screen off/on.
Send the vdev param on NAN vdev by setting the "bit 0" to 0 to
indicate firmware to ignore framework configured DW value and
consider the firmware default value.
Change-Id: Idcbdae94bd6a96fbbe15ec103a0aa558cdfcd572
CRs-Fixed: 2721980
In some cases, TSO segment may larger than 255.
If use uint8 as the loop index, tx logic will
overflow and sending the last segment repeatly,
then lead to buffer double free. Change index
variable to uint32
CRs-Fixed: 2722918
Change-Id: I156a5d8b8a3895e4f7bfc53cf5561f51ca8b06ca
remove additional reap logic for SG buffers, as we
are also maintaining a state for SG buffers in dp_soc
structure
CRs-Fixed: 2722245
Change-Id: Ibec3007036e78a2ec1c5055244b6518f889e16a4
Profile the scan APIs to debug the scheduler watch dog bite
due to callback scm_scan_event_handler exceeded its allotted
time of 10s
CRs-Fixed: 2713584
Change-Id: I494ce9df4cd6c7458c367527c8e5d47a9262739a
Currently api osif_nl_to_crypto_auth_type is trying to convert
the nl specific auth types to driver specific auth types but
it does not return the correct value, this api always returns
auth type as none as it never updates the return value after
the initialization.
While parsing WPA and WAPI, open authmode and cipher and akm are
set as none by default.
Thus return converted value of the auth type. Also fix the
return type of the akm conversion. Also avoid setting
open authmode and cipher and akm as none while parsing WPA
and WAPI ie.
Change-Id: I260e58a28ddbf6b20a290488e205586a624c9b46
CRs-Fixed: 2725323
Add WMI LOG for set peer parameter for debug
purposes like set peer_nss, peer_nss_160
CRs-Fixed: 2726041
Change-Id: Ib1a3d22cd101b76efc07121fc333d303b1a26377
Rxdma decrypt errors are observed when the association
is in progress as AP sends encrypted data packets to
DUT-STA. As part of the rxdma error handling, excessive
prints are logged to console resulting in an assert.
Fix is to rate limit rxdma decrypt error related log
Change-Id: I2ef28c635d77e3acafd067b921cdb13c277756c7
CRs-Fixed: 2725335
Move support_11ax macro to buildcaps to remove dependency
on legacy FW headers and add it on Buildcaps to fix
redefine error.
CRs-Fixed: 2719782
Change-Id: Ic2902663083cda10e0a9e9b2da85ee1b267b6b7c
Decouple legacy FW headers for lithium builds since
its not required for the same
CRs-Fixed: 2719782
Change-Id: Ibdfdec51c5379fe42e23bf04a228ae6fb1a3eac9
Use sync wake when trying to awake device for register
accessing.
This can avoid device re-enter low power mode after
device_wake asserted.
Change-Id: Iba62f5753ccb7e11d9746a445db4cce48e5e3a14
CRs-Fixed: 2703609
Add interface changes for WMI_VDEV_BCN_LATENCY_EVENTID which
is sent by firmware to indicate the latency IE received from
connected AP in beacon.
Change-Id: Ia6cec01be89f13885b011414f0d77f64c6eb05ee
CRs-Fixed: 2723226
Race condition is observed as dp_ipa_rx_intrabss_fwd is
accessing da_peer after releasing the ref count of the peer
while that peer is deleted parallelly.
To fix this, da_peer and sa_peer are only assigned if the
peers are found in the vdev.
Change-Id: Ib03835a509d656eb11946c075b820555b04934f8
CRs-Fixed: 2723448
qcacld-2.0 to qcacld-3.0 propagation
Add length check to prevent the data overflow the wmi buffer. The
length in the fixed_params and TLV hdr also need check.
Change-Id: I2bbf9f08b6c19062324dca420af08ff94835eaca
CRs-Fixed: 2248879
