Replace the preemption disable/enable with migrate_disable/enable() to
reflect the actual requirement and to allow PREEMPT_RT to substitute it
with an actual migration disable mechanism which does not disable
preemption.
[ tglx: Switched it over to migrate disable ]
Change-Id: I96c3fc991104527ec81e46aa90fb5a0353215fd5
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.785306549@linutronix.de
pcpu_freelist_populate() is disabling interrupts and then iterates over the
possible CPUs. The reason why this disables interrupts is to silence
lockdep because the invoked ___pcpu_freelist_push() takes spin locks.
Neither the interrupt disabling nor the locking are required in this
function because it's called during initialization and the resulting map is
not yet visible to anything.
Split out the actual push assignement into an inline, call it from the loop
and remove the interrupt disable.
Change-Id: I0cc18b43ddba48d5b170775366030c93915b5477
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.365930116@linutronix.de
The comment where the bucket lock is acquired says:
/* bpf_map_update_elem() can be called in_irq() */
which is not really helpful and aside of that it does not explain the
subtle details of the hash bucket locks expecially in the context of BPF
and perf, kprobes and tracing.
Add a comment at the top of the file which explains the protection scopes
and the details how potential deadlocks are prevented.
Change-Id: Icb4118dec6490174f93a7fdbac3ae2b27072c6d8
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145642.755793061@linutronix.de
Aside of the general unsafety of run-time map allocation for
instrumentation type programs RT enabled kernels have another constraint:
The instrumentation programs are invoked with preemption disabled, but the
memory allocator spinlocks cannot be acquired in atomic context because
they are converted to 'sleeping' spinlocks on RT.
Therefore enforce map preallocation for these programs types when RT is
enabled.
Change-Id: I6eb71f8165d313c13679f751a8091b1a4e8690e5
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145642.648784007@linutronix.de
The assumption that only programs attached to perf NMI events can deadlock
on memory allocators is wrong. Assume the following simplified callchain:
kmalloc() from regular non BPF context
cache empty
freelist empty
lock(zone->lock);
tracepoint or kprobe
BPF()
update_elem()
lock(bucket)
kmalloc()
cache empty
freelist empty
lock(zone->lock); <- DEADLOCK
There are other ways which do not involve locking to create wreckage:
kmalloc() from regular non BPF context
local_irq_save();
...
obj = slab_first();
kprobe()
BPF()
update_elem()
lock(bucket)
kmalloc()
local_irq_save();
...
obj = slab_first(); <- Same object as above ...
So preallocation _must_ be enforced for all variants of intrusive
instrumentation.
Unfortunately immediate enforcement would break backwards compatibility, so
for now such programs still are allowed to run, but a one time warning is
emitted in dmesg and the verifier emits a warning in the verifier log as
well so developers are made aware about this and can fix their programs
before the enforcement becomes mandatory.
Change-Id: I453978f260c85e4666a415ff75df3610e73aa292
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145642.540542802@linutronix.de
generic_xdp_tx and xdp_do_generic_redirect are only used by builtin
code, so remove the EXPORT_SYMBOL_GPL for them.
Change-Id: I929494438e36e87ab61305354262603d5680a12d
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 736b46027e ("net: Add ID (if needed) to sock_reuseport and expose
reuseport_lock") has introduced lazy generation of reuseport group IDs that
survive group resize.
By comparing the identifier we check if BPF reuseport program is not trying
to select a socket from a BPF map that belongs to a different reuseport
group than the one the packet is for.
Because SOCKARRAY used to be the only BPF map type that can be used with
reuseport BPF, it was possible to delay the generation of reuseport group
ID until a socket from the group was inserted into BPF map for the first
time.
Now that SOCK{MAP,HASH} can be used with reuseport BPF we have two options,
either generate the reuseport ID on map update, like SOCKARRAY does, or
allocate an ID from the start when reuseport group gets created.
This patch takes the latter approach to keep sockmap free of calls into
reuseport code. This streamlines the reuseport_id access as its lifetime
now matches the longevity of reuseport object.
The cost of this simplification, however, is that we allocate reuseport IDs
for all SO_REUSEPORT users. Even those that don't use SOCKARRAY in their
setups. With the way identifiers are currently generated, we can have at
most S32_MAX reuseport groups, which hopefully is sufficient. If we ever
get close to the limit, we can switch an u64 counter like sk_cookie.
Another change is that we now always call into SOCKARRAY logic to unlink
the socket from the map when unhashing or closing the socket. Previously we
did it only when at least one socket from the group was in a BPF map.
It is worth noting that this doesn't conflict with sockmap tear-down in
case a socket is in a SOCK{MAP,HASH} and belongs to a reuseport
group. sockmap tear-down happens first:
prot->unhash
`- tcp_bpf_unhash
|- tcp_bpf_remove
| `- while (sk_psock_link_pop(psock))
| `- sk_psock_unlink
| `- sock_map_delete_from_link
| `- __sock_map_delete
| `- sock_map_unref
| `- sk_psock_put
| `- sk_psock_drop
| `- rcu_assign_sk_user_data(sk, NULL)
`- inet_unhash
`- reuseport_detach_sock
`- bpf_sk_reuseport_detach
`- WRITE_ONCE(sk->sk_user_data, NULL)
Suggested-by: Martin Lau <kafai@fb.com>
Change-Id: Ia91949b7e262c1a6205e5cbf3809589ea544d275
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200218171023.844439-10-jakub@cloudflare.com
SOCKMAP & SOCKHASH now support storing references to listening
sockets. Nothing keeps us from using these map types a collection of
sockets to select from in BPF reuseport programs. Whitelist the map types
with the bpf_sk_select_reuseport helper.
The restriction that the socket has to be a member of a reuseport group
still applies. Sockets in SOCKMAP/SOCKHASH that don't have sk_reuseport_cb
set are not a valid target and we signal it with -EINVAL.
The main benefit from this change is that, in contrast to
REUSEPORT_SOCKARRAY, SOCK{MAP,HASH} don't impose a restriction that a
listening socket can be just one BPF map at the same time.
Change-Id: Ifb540747b51569dd82ac38e07f7a2bc3116d3f74
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200218171023.844439-9-jakub@cloudflare.com
Grabbing the spinlock for every bucket even if it's empty, was causing
significant perfomance cost when traversing htab maps that have only a
few entries. This patch addresses the issue by checking first the
bucket_cnt, if the bucket has some entries then we go and grab the
spinlock and proceed with the batching.
Tested with a htab of size 50K and different value of populated entries.
Before:
Benchmark Time(ns) CPU(ns)
---------------------------------------------
BM_DumpHashMap/1 2759655 2752033
BM_DumpHashMap/10 2933722 2930825
BM_DumpHashMap/200 3171680 3170265
BM_DumpHashMap/500 3639607 3635511
BM_DumpHashMap/1000 4369008 4364981
BM_DumpHashMap/5k 11171919 11134028
BM_DumpHashMap/20k 69150080 69033496
BM_DumpHashMap/39k 190501036 190226162
After:
Benchmark Time(ns) CPU(ns)
---------------------------------------------
BM_DumpHashMap/1 202707 200109
BM_DumpHashMap/10 213441 210569
BM_DumpHashMap/200 478641 472350
BM_DumpHashMap/500 980061 967102
BM_DumpHashMap/1000 1863835 1839575
BM_DumpHashMap/5k 8961836 8902540
BM_DumpHashMap/20k 69761497 69322756
BM_DumpHashMap/39k 187437830 186551111
Fixes: 057996380a42 ("bpf: Add batch ops to all htab bpf map")
Change-Id: Ie026374d67d08f831feda8d0f24c6ff423870804
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200218172552.215077-1-brianvv@google.com
Branch records are a CPU feature that can be configured to record
certain branches that are taken during code execution. This data is
particularly interesting for profile guided optimizations. perf has had
branch record support for a while but the data collection can be a bit
coarse grained.
We (Facebook) have seen in experiments that associating metadata with
branch records can improve results (after postprocessing). We generally
use bpf_probe_read_*() to get metadata out of userspace. That's why bpf
support for branch records is useful.
Aside from this particular use case, having branch data available to bpf
progs can be useful to get stack traces out of userspace applications
that omit frame pointers.
Change-Id: I6475b600df60571d1b0daa985eff1ee01c8886eb
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200218030432.4600-2-dxu@dxuuu.xyz
The performance of bpf_redirect() is now roughly the same as that of
bpf_redirect_map(). However, David Ahern pointed out that the header file
has not been updated to reflect this, and still says that a significant
performance increase is possible when using bpf_redirect_map(). Remove this
text from the bpf_redirect_map() description, and reword the description in
bpf_redirect() slightly. Also fix the 'Return' section of the
bpf_redirect_map() documentation.
Fixes: 1d233886dd90 ("xdp: Use bulking for non-map XDP_REDIRECT and consolidate code paths")
Reported-by: David Ahern <dsahern@gmail.com>
Change-Id: Ifa2d36dab5eb897015473a038d28c4b5fac0cff4
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200218130334.29889-1-toke@redhat.com
Fix the following sparse warning:
kernel/bpf/btf.c:4131:5: warning: symbol 'btf_check_func_type_match' was
not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Change-Id: I60644af8943d076982ce257c7b9a0e4e7e45cad0
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200210011441.147102-1-yaohongbo@huawei.com
Fix the way modifiers are skipped while walking pointers. Otherwise second
level dereferences of 'const struct foo *' will be rejected by the verifier.
Fixes: 9e15db66136a ("bpf: Implement accurate raw_tp context access via BTF")
Change-Id: I944e3a79943b8b7bccf3e4a5b6652b6b7034abee
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200201000314.261392-1-ast@kernel.org
BPF dispatcher functions are patched at runtime to perform direct
instead of indirect calls. Disable CFI for the dispatcher functions
to avoid conflicts.
Bug: 145210207
Change-Id: I61dc7ce8a549145a79b7e69c646888578e0641ba
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Instead of using a locally defined "struct bpf_verifier_log log = {}",
btf_struct_ops_init() should reuse the "log" from its calling
function "btf_parse_vmlinux()". It should also resolve the
frame-size too large compiler warning in some ARCH.
Fixes: 27ae7997a661 ("bpf: Introduce BPF_PROG_TYPE_STRUCT_OPS")
Change-Id: I6301205e03cde7817c6590a4f9c027d5df3da6be
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200127175145.1154438-1-kafai@fb.com
Now that we depend on rcu_call() and synchronize_rcu() to also wait
for preempt_disabled region to complete the rcu read critical section
in __dev_map_flush() is no longer required. Except in a few special
cases in drivers that need it for other reasons.
These originally ensured the map reference was safe while a map was
also being free'd. And additionally that bpf program updates via
ndo_bpf did not happen while flush updates were in flight. But flush
by new rules can only be called from preempt-disabled NAPI context.
The synchronize_rcu from the map free path and the rcu_call from the
delete path will ensure the reference there is safe. So lets remove
the rcu_read_lock and rcu_read_unlock pair to avoid any confusion
around how this is being protected.
If the rcu_read_lock was required it would mean errors in the above
logic and the original patch would also be wrong.
Now that we have done above we put the rcu_read_lock in the driver
code where it is needed in a driver dependent way. I think this
helps readability of the code so we know where and why we are
taking read locks. Most drivers will not need rcu_read_locks here
and further XDP drivers already have rcu_read_locks in their code
paths for reading xdp programs on RX side so this makes it symmetric
where we don't have half of rcu critical sections define in driver
and the other half in devmap.
Change-Id: Id759e81634f3f69fc8684333067637decca01459
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/1580084042-11598-4-git-send-email-john.fastabend@gmail.com
When unwinding the stack we need to identify each address
to successfully continue. Adding latch tree to keep trampolines
for quick lookup during the unwind.
The patch uses first 48 bytes for latch tree node, leaving 4048
bytes from the rest of the page for trampoline or dispatcher
generated code.
It's still enough not to affect trampoline and dispatcher progs
maximum counts.
Change-Id: Iaa54e16be7748a42b86579ab200909cf114b356d
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200123161508.915203-3-jolsa@kernel.org
When accessing the context we allow access to arguments with
scalar type and pointer to struct. But we deny access for
pointer to scalar type, which is the case for many functions.
Alexei suggested to take conservative approach and allow
currently only string pointer access, which is the case
for most functions now:
Adding check if the pointer is to string type and allow access to it.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Change-Id: I120d4073bc962d16bf7525dc58223448856cfd7d
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200123161508.915203-2-jolsa@kernel.org
This patch adds a helper to read the 64bit jiffies. It will be used
in a later patch to implement the bpf_cubic.c.
The helper is inlined for jit_requested and 64 BITS_PER_LONG
as the map_gen_lookup(). Other cases could be considered together
with map_gen_lookup() if needed.
Change-Id: I93d17bab15eaa7e260fd2ae90a373aa054c62559
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200122233646.903260-1-kafai@fb.com
Introduce dynamic program extensions. The users can load additional BPF
functions and replace global functions in previously loaded BPF programs while
these programs are executing.
Global functions are verified individually by the verifier based on their types only.
Hence the global function in the new program which types match older function can
safely replace that corresponding function.
This new function/program is called 'an extension' of old program. At load time
the verifier uses (attach_prog_fd, attach_btf_id) pair to identify the function
to be replaced. The BPF program type is derived from the target program into
extension program. Technically bpf_verifier_ops is copied from target program.
The BPF_PROG_TYPE_EXT program type is a placeholder. It has empty verifier_ops.
The extension program can call the same bpf helper functions as target program.
Single BPF_PROG_TYPE_EXT type is used to extend XDP, SKB and all other program
types. The verifier allows only one level of replacement. Meaning that the
extension program cannot recursively extend an extension. That also means that
the maximum stack size is increasing from 512 to 1024 bytes and maximum
function nesting level from 8 to 16. The programs don't always consume that
much. The stack usage is determined by the number of on-stack variables used by
the program. The verifier could have enforced 512 limit for combined original
plus extension program, but it makes for difficult user experience. The main
use case for extensions is to provide generic mechanism to plug external
programs into policy program or function call chaining.
BPF trampoline is used to track both fentry/fexit and program extensions
because both are using the same nop slot at the beginning of every BPF
function. Attaching fentry/fexit to a function that was replaced is not
allowed. The opposite is true as well. Replacing a function that currently
being analyzed with fentry/fexit is not allowed. The executable page allocated
by BPF trampoline is not used by program extensions. This inefficiency will be
optimized in future patches.
Function by function verification of global function supports scalars and
pointer to context only. Hence program extensions are supported for such class
of global functions only. In the future the verifier will be extended with
support to pointers to structures, arrays with sizes, etc.
Change-Id: I86dd651b5ad4a1ea619160cc9f56b2527530bdc2
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200121005348.2769920-2-ast@kernel.org
Restore the 'if (env->cur_state)' check that was incorrectly removed during
code move. Under memory pressure env->cur_state can be freed and zeroed inside
do_check(). Hence the check is necessary.
Fixes: 51c39bb1d5d1 ("bpf: Introduce function-by-function verification")
Reported-by: syzbot+b296579ba5015704d9fa@syzkaller.appspotmail.com
Change-Id: I3e183c6fe8f103b887137a3001da57d617b8942d
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200122024138.3385590-1-ast@kernel.org
Though the second half of trampoline page is unused a task could be
preempted in the middle of the first half of trampoline and two
updates to trampoline would change the code from underneath the
preempted task. Hence wait for tasks to voluntarily schedule or go
to userspace. Add similar wait before freeing the trampoline.
Fixes: fec56f5890d9 ("bpf: Introduce BPF trampoline")
Reported-by: Jann Horn <jannh@google.com>
Change-Id: I8ba8b449c56d817350ce2fb39370aeb317625277
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/bpf/20200121032231.3292185-1-ast@kernel.org
kernel/bpf/inode.c misuses kern_path...() - it's much simpler (and
more efficient, on top of that) to use user_path...() counterparts
rather than bothering with doing getname() manually.
Change-Id: I17b1443b26c836d95725db32acddbf531c0c030a
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200120232858.GF8904@ZenIV.linux.org.uk
Generic update/delete batch ops functions were using __bpf_copy_key
without properly freeing the memory. Handle the memory allocation and
copy_from_user separately.
Fixes: aa2e93b8e58e ("bpf: Add generic support for update and delete batch ops")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Change-Id: I42a98bfbb4e68c3ffb3dc958847ce8266ccb90f6
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200119194040.128369-1-brianvv@google.com
kernel/bpf/syscall.c: In function generic_map_lookup_batch:
kernel/bpf/syscall.c:1339:7: warning: variable first_key set but not used [-Wunused-but-set-variable]
It is never used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Change-Id: Iec0c30c928b825397054c8c7bb59e68d52ddf120
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Brian Vazquez <brianvv@google.com>
Link: https://lore.kernel.org/bpf/20200116145300.59056-1-yuehaibing@huawei.com
Now that we don't have a reference to a devmap when flushing the device
bulk queue, let's change the the devmap_xmit tracepoint to remote the
map_id and map_index fields entirely. Rearrange the fields so 'drops' and
'sent' stay in the same position in the tracepoint struct, to make it
possible for the xdp_monitor utility to read both the old and the new
format.
Change-Id: Ibccba8bd032ab005199dccf6ec58df1548bb0295
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/157918768613.1458396.9165902403373826572.stgit@toke.dk
Since the bulk queue used by XDP_REDIRECT now lives in struct net_device,
we can re-use the bulking for the non-map version of the bpf_redirect()
helper. This is a simple matter of having xdp_do_redirect_slow() queue the
frame on the bulk queue instead of sending it out with __bpf_tx_xdp().
Unfortunately we can't make the bpf_redirect() helper return an error if
the ifindex doesn't exit (as bpf_redirect_map() does), because we don't
have a reference to the network namespace of the ingress device at the time
the helper is called. So we have to leave it as-is and keep the device
lookup in xdp_do_redirect_slow().
Since this leaves less reason to have the non-map redirect code in a
separate function, so we get rid of the xdp_do_redirect_slow() function
entirely. This does lose us the tracepoint disambiguation, but fortunately
the xdp_redirect and xdp_redirect_map tracepoints use the same tracepoint
entry structures. This means both can contain a map index, so we can just
amend the tracepoint definitions so we always emit the xdp_redirect(_err)
tracepoints, but with the map ID only populated if a map is present. This
means we retire the xdp_redirect_map(_err) tracepoints entirely, but keep
the definitions around in case someone is still listening for them.
With this change, the performance of the xdp_redirect sample program goes
from 5Mpps to 8.4Mpps (a 68% increase).
Since the flush functions are no longer map-specific, rename the flush()
functions to drop _map from their names. One of the renamed functions is
the xdp_do_flush_map() callback used in all the xdp-enabled drivers. To
keep from having to update all drivers, use a #define to keep the old name
working, and only update the virtual drivers in this patch.
Change-Id: I770abdab19438ad8efbe0376bb442043acf92c19
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/157918768505.1458396.17518057312953572912.stgit@toke.dk
Commit 96360004b862 ("xdp: Make devmap flush_list common for all map
instances"), changed devmap flushing to be a global operation instead of a
per-map operation. However, the queue structure used for bulking was still
allocated as part of the containing map.
This patch moves the devmap bulk queue into struct net_device. The
motivation for this is reusing it for the non-map variant of XDP_REDIRECT,
which will be changed in a subsequent commit. To avoid other fields of
struct net_device moving to different cache lines, we also move a couple of
other members around.
We defer the actual allocation of the bulk queue structure until the
NETDEV_REGISTER notification devmap.c. This makes it possible to check for
ndo_xdp_xmit support before allocating the structure, which is not possible
at the time struct net_device is allocated. However, we keep the freeing in
free_netdev() to avoid adding another RCU callback on NETDEV_UNREGISTER.
Because of this change, we lose the reference back to the map that
originated the redirect, so change the tracepoint to always return 0 as the
map ID and index. Otherwise no functional change is intended with this
patch.
After this patch, the relevant part of struct net_device looks like this,
according to pahole:
/* --- cacheline 14 boundary (896 bytes) --- */
struct netdev_queue * _tx __attribute__((__aligned__(64))); /* 896 8 */
unsigned int num_tx_queues; /* 904 4 */
unsigned int real_num_tx_queues; /* 908 4 */
struct Qdisc * qdisc; /* 912 8 */
unsigned int tx_queue_len; /* 920 4 */
spinlock_t tx_global_lock; /* 924 4 */
struct xdp_dev_bulk_queue * xdp_bulkq; /* 928 8 */
struct xps_dev_maps * xps_cpus_map; /* 936 8 */
struct xps_dev_maps * xps_rxqs_map; /* 944 8 */
struct mini_Qdisc * miniq_egress; /* 952 8 */
/* --- cacheline 15 boundary (960 bytes) --- */
struct hlist_head qdisc_hash[16]; /* 960 128 */
/* --- cacheline 17 boundary (1088 bytes) --- */
struct timer_list watchdog_timer; /* 1088 40 */
/* XXX last struct has 4 bytes of padding */
int watchdog_timeo; /* 1128 4 */
/* XXX 4 bytes hole, try to pack */
struct list_head todo_list; /* 1136 16 */
/* --- cacheline 18 boundary (1152 bytes) --- */
Change-Id: Ifa34360eda6596b7fab5e77e523d01bdfd40e993
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/157918768397.1458396.12673224324627072349.stgit@toke.dk
htab can't use generic batch support due some problematic behaviours
inherent to the data structre, i.e. while iterating the bpf map a
concurrent program might delete the next entry that batch was about to
use, in that case there's no easy solution to retrieve the next entry,
the issue has been discussed multiple times (see [1] and [2]).
The only way hmap can be traversed without the problem previously
exposed is by making sure that the map is traversing entire buckets.
This commit implements those strict requirements for hmap, the
implementation follows the same interaction that generic support with
some exceptions:
- If keys/values buffer are not big enough to traverse a bucket,
ENOSPC will be returned.
- out_batch contains the value of the next bucket in the iteration, not
the next key, but this is transparent for the user since the user
should never use out_batch for other than bpf batch syscalls.
This commits implements BPF_MAP_LOOKUP_BATCH and adds support for new
command BPF_MAP_LOOKUP_AND_DELETE_BATCH. Note that for update/delete
batch ops it is possible to use the generic implementations.
[1] https://lore.kernel.org/bpf/20190724165803.87470-1-brianvv@google.com/
[2] https://lore.kernel.org/bpf/20190906225434.3635421-1-yhs@fb.com/
Change-Id: I267e0d1b365e421d844529653726f48f3048b34c
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115184308.162644-6-brianvv@google.com
This adds the generic batch ops functionality to bpf arraymap, note that
since deletion is not a valid operation for arraymap, only batch and
lookup are added.
Change-Id: I4499035f878257ea00d85d1713a929159cec302a
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200115184308.162644-5-brianvv@google.com
This commit adds generic support for update and delete batch ops that
can be used for almost all the bpf maps. These commands share the same
UAPI attr that lookup and lookup_and_delete batch ops use and the
syscall commands are:
BPF_MAP_UPDATE_BATCH
BPF_MAP_DELETE_BATCH
The main difference between update/delete and lookup batch ops is that
for update/delete keys/values must be specified for userspace and
because of that, neither in_batch nor out_batch are used.
Suggested-by: Stanislav Fomichev <sdf@google.com>
Change-Id: I3c78998d958950729ca7e034cfc26d89a20a4f3b
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115184308.162644-4-brianvv@google.com
This commit introduces generic support for the bpf_map_lookup_batch.
This implementation can be used by almost all the bpf maps since its core
implementation is relying on the existing map_get_next_key and
map_lookup_elem. The bpf syscall subcommand introduced is:
BPF_MAP_LOOKUP_BATCH
The UAPI attribute is:
struct { /* struct used by BPF_MAP_*_BATCH commands */
__aligned_u64 in_batch; /* start batch,
* NULL to start from beginning
*/
__aligned_u64 out_batch; /* output: next start batch */
__aligned_u64 keys;
__aligned_u64 values;
__u32 count; /* input/output:
* input: # of key/value
* elements
* output: # of filled elements
*/
__u32 map_fd;
__u64 elem_flags;
__u64 flags;
} batch;
in_batch/out_batch are opaque values use to communicate between
user/kernel space, in_batch/out_batch must be of key_size length.
To start iterating from the beginning in_batch must be null,
count is the # of key/value elements to retrieve. Note that the 'keys'
buffer must be a buffer of key_size * count size and the 'values' buffer
must be value_size * count, where value_size must be aligned to 8 bytes
by userspace if it's dealing with percpu maps. 'count' will contain the
number of keys/values successfully retrieved. Note that 'count' is an
input/output variable and it can contain a lower value after a call.
If there's no more entries to retrieve, ENOENT will be returned. If error
is ENOENT, count might be > 0 in case it copied some values but there were
no more entries to retrieve.
Note that if the return code is an error and not -EFAULT,
count indicates the number of elements successfully processed.
Suggested-by: Stanislav Fomichev <sdf@google.com>
Change-Id: I4212d9ce545cd2631f5d5dbc78504570f76b2763
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115184308.162644-3-brianvv@google.com
This commit moves reusable code from map_lookup_elem and map_update_elem
to avoid code duplication in kernel/bpf/syscall.c.
Change-Id: I1688ed0c0f20441a7368f23bdd57910cf8fdecef
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200115184308.162644-2-brianvv@google.com
Commit 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
added helper bpf_send_signal() which permits bpf program to
send a signal to the current process. The signal may be
delivered to any threads in the process.
We found a use case where sending the signal to the current
thread is more preferable.
- A bpf program will collect the stack trace and then
send signal to the user application.
- The user application will add some thread specific
information to the just collected stack trace for
later analysis.
If bpf_send_signal() is used, user application will need
to check whether the thread receiving the signal matches
the thread collecting the stack by checking thread id.
If not, it will need to send signal to another thread
through pthread_kill().
This patch proposed a new helper bpf_send_signal_thread(),
which sends the signal to the thread corresponding to
the current kernel task. This way, user space is guaranteed that
bpf_program execution context and user space signal handling
context are the same thread.
Change-Id: I92c226b1f80e4f9f17e4465c81a36551386d3396
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115035002.602336-1-yhs@fb.com
Instead of using bpf_struct_ops_map_lookup_elem() which is
not implemented, bpf_struct_ops_map_seq_show_elem() should
also use bpf_struct_ops_map_sys_lookup_elem() which does
an inplace update to the value. The change allocates
a value to pass to bpf_struct_ops_map_sys_lookup_elem().
[root@arch-fb-vm1 bpf]# cat /sys/fs/bpf/dctcp
{{{1}},BPF_STRUCT_OPS_STATE_INUSE,{{00000000df93eebc,00000000df93eebc},0,2, ...
Fixes: 85d33df357b6 ("bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Change-Id: I0c051c200b840d35a2cc7918f7a55e331c90bfd8
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200114072647.3188298-1-kafai@fb.com
New llvm and old llvm with libbpf help produce BTF that distinguish global and
static functions. Unlike arguments of static function the arguments of global
functions cannot be removed or optimized away by llvm. The compiler has to use
exactly the arguments specified in a function prototype. The argument type
information allows the verifier validate each global function independently.
For now only supported argument types are pointer to context and scalars. In
the future pointers to structures, sizes, pointer to packet data can be
supported as well. Consider the following example:
static int f1(int ...)
{
...
}
int f3(int b);
int f2(int a)
{
f1(a) + f3(a);
}
int f3(int b)
{
...
}
int main(...)
{
f1(...) + f2(...) + f3(...);
}
The verifier will start its safety checks from the first global function f2().
It will recursively descend into f1() because it's static. Then it will check
that arguments match for the f3() invocation inside f2(). It will not descend
into f3(). It will finish f2() that has to be successfully verified for all
possible values of 'a'. Then it will proceed with f3(). That function also has
to be safe for all possible values of 'b'. Then it will start subprog 0 (which
is main() function). It will recursively descend into f1() and will skip full
check of f2() and f3(), since they are global. The order of processing global
functions doesn't affect safety, since all global functions must be proven safe
based on their arguments only.
Such function by function verification can drastically improve speed of the
verification and reduce complexity.
Note that the stack limit of 512 still applies to the call chain regardless whether
functions were static or global. The nested level of 8 also still applies. The
same recursion prevention checks are in place as well.
The type information and static/global kind is preserved after the verification
hence in the above example global function f2() and f3() can be replaced later
by equivalent functions with the same types that are loaded and verified later
without affecting safety of this main() program. Such replacement (re-linking)
of global functions is a subject of future patches.
Change-Id: I6002acbde98a8773eddc3395bc8490bef093b587
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-3-ast@kernel.org
Match the 16-bit width of skbuff->protocol. Fills an 8-bit hole so
sizeof(struct sock) does not change.
Also take care of BPF field access for sk_type/sk_protocol. Both of them
are now outside the bitfield, so we can use load instructions without
further shifting/masking.
v5 -> v6:
- update eBPF accessors, too (Intel's kbuild test robot)
v2 -> v3:
- keep 'sk_type' 2 bytes aligned (Eric)
v1 -> v2:
- preserve sk_pacing_shift as bit field (Eric)
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Change-Id: I4440b2bf7287331bb68ec4d7babaeb1a5015b6c0
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SK_PROTOCOL_MAX is only used in two places, for DECNet and AX.25. The
limits have more to do with the those protocol definitions than they do
with the data type of sk_protocol, so remove SK_PROTOCOL_MAX and use
U8_MAX directly.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Change-Id: Iff043154c9081bd274a73cb55895940f1873546f
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document BPF_F_QUERY_EFFECTIVE flag, mostly to clarify how it affects
attach_flags what may not be obvious and what may lead to confision.
Specifically attach_flags is returned only for target_fd but if programs
are inherited from an ancestor cgroup then returned attach_flags for
current cgroup may be confusing. For example, two effective programs of
same attach_type can be returned but w/o BPF_F_ALLOW_MULTI in
attach_flags.
Simple repro:
# bpftool c s /sys/fs/cgroup/path/to/task
ID AttachType AttachFlags Name
# bpftool c s /sys/fs/cgroup/path/to/task effective
ID AttachType AttachFlags Name
95043 ingress tw_ipt_ingress
95048 ingress tw_ingress
Change-Id: I169575e0d3c05d6835af2cd7bad69b172812d5f9
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200108014006.938363-1-rdna@fb.com
Add a helper to send out a tcp-ack. It will be used in the later
bpf_dctcp implementation that requires to send out an ack
when the CE state changed.
Change-Id: Iebba1f612c4bef7d11c4aea61d65bbd905208666
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109004551.3900448-1-kafai@fb.com
This patch makes "struct tcp_congestion_ops" to be the first user
of BPF STRUCT_OPS. It allows implementing a tcp_congestion_ops
in bpf.
The BPF implemented tcp_congestion_ops can be used like
regular kernel tcp-cc through sysctl and setsockopt. e.g.
[root@arch-fb-vm1 bpf]# sysctl -a | egrep congestion
net.ipv4.tcp_allowed_congestion_control = reno cubic bpf_cubic
net.ipv4.tcp_available_congestion_control = reno bic cubic bpf_cubic
net.ipv4.tcp_congestion_control = bpf_cubic
There has been attempt to move the TCP CC to the user space
(e.g. CCP in TCP). The common arguments are faster turn around,
get away from long-tail kernel versions in production...etc,
which are legit points.
BPF has been the continuous effort to join both kernel and
userspace upsides together (e.g. XDP to gain the performance
advantage without bypassing the kernel). The recent BPF
advancements (in particular BTF-aware verifier, BPF trampoline,
BPF CO-RE...) made implementing kernel struct ops (e.g. tcp cc)
possible in BPF. It allows a faster turnaround for testing algorithm
in the production while leveraging the existing (and continue growing)
BPF feature/framework instead of building one specifically for
userspace TCP CC.
This patch allows write access to a few fields in tcp-sock
(in bpf_tcp_ca_btf_struct_access()).
The optional "get_info" is unsupported now. It can be added
later. One possible way is to output the info with a btf-id
to describe the content.
Change-Id: I73c741f15ec5418c21d95977025185d6fa79bb1b
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003508.3856115-1-kafai@fb.com
The patch introduces BPF_MAP_TYPE_STRUCT_OPS. The map value
is a kernel struct with its func ptr implemented in bpf prog.
This new map is the interface to register/unregister/introspect
a bpf implemented kernel struct.
The kernel struct is actually embedded inside another new struct
(or called the "value" struct in the code). For example,
"struct tcp_congestion_ops" is embbeded in:
struct bpf_struct_ops_tcp_congestion_ops {
refcount_t refcnt;
enum bpf_struct_ops_state state;
struct tcp_congestion_ops data; /* <-- kernel subsystem struct here */
}
The map value is "struct bpf_struct_ops_tcp_congestion_ops".
The "bpftool map dump" will then be able to show the
state ("inuse"/"tobefree") and the number of subsystem's refcnt (e.g.
number of tcp_sock in the tcp_congestion_ops case). This "value" struct
is created automatically by a macro. Having a separate "value" struct
will also make extending "struct bpf_struct_ops_XYZ" easier (e.g. adding
"void (*init)(void)" to "struct bpf_struct_ops_XYZ" to do some
initialization works before registering the struct_ops to the kernel
subsystem). The libbpf will take care of finding and populating the
"struct bpf_struct_ops_XYZ" from "struct XYZ".
Register a struct_ops to a kernel subsystem:
1. Load all needed BPF_PROG_TYPE_STRUCT_OPS prog(s)
2. Create a BPF_MAP_TYPE_STRUCT_OPS with attr->btf_vmlinux_value_type_id
set to the btf id "struct bpf_struct_ops_tcp_congestion_ops" of the
running kernel.
Instead of reusing the attr->btf_value_type_id,
btf_vmlinux_value_type_id s added such that attr->btf_fd can still be
used as the "user" btf which could store other useful sysadmin/debug
info that may be introduced in the furture,
e.g. creation-date/compiler-details/map-creator...etc.
3. Create a "struct bpf_struct_ops_tcp_congestion_ops" object as described
in the running kernel btf. Populate the value of this object.
The function ptr should be populated with the prog fds.
4. Call BPF_MAP_UPDATE with the object created in (3) as
the map value. The key is always "0".
During BPF_MAP_UPDATE, the code that saves the kernel-func-ptr's
args as an array of u64 is generated. BPF_MAP_UPDATE also allows
the specific struct_ops to do some final checks in "st_ops->init_member()"
(e.g. ensure all mandatory func ptrs are implemented).
If everything looks good, it will register this kernel struct
to the kernel subsystem. The map will not allow further update
from this point.
Unregister a struct_ops from the kernel subsystem:
BPF_MAP_DELETE with key "0".
Introspect a struct_ops:
BPF_MAP_LOOKUP_ELEM with key "0". The map value returned will
have the prog _id_ populated as the func ptr.
The map value state (enum bpf_struct_ops_state) will transit from:
INIT (map created) =>
INUSE (map updated, i.e. reg) =>
TOBEFREE (map value deleted, i.e. unreg)
The kernel subsystem needs to call bpf_struct_ops_get() and
bpf_struct_ops_put() to manage the "refcnt" in the
"struct bpf_struct_ops_XYZ". This patch uses a separate refcnt
for the purose of tracking the subsystem usage. Another approach
is to reuse the map->refcnt and then "show" (i.e. during map_lookup)
the subsystem's usage by doing map->refcnt - map->usercnt to filter out
the map-fd/pinned-map usage. However, that will also tie down the
future semantics of map->refcnt and map->usercnt.
The very first subsystem's refcnt (during reg()) holds one
count to map->refcnt. When the very last subsystem's refcnt
is gone, it will also release the map->refcnt. All bpf_prog will be
freed when the map->refcnt reaches 0 (i.e. during map_free()).
Here is how the bpftool map command will look like:
[root@arch-fb-vm1 bpf]# bpftool map show
6: struct_ops name dctcp flags 0x0
key 4B value 256B max_entries 1 memlock 4096B
btf_id 6
[root@arch-fb-vm1 bpf]# bpftool map dump id 6
[{
"value": {
"refcnt": {
"refs": {
"counter": 1
}
},
"state": 1,
"data": {
"list": {
"next": 0,
"prev": 0
},
"key": 0,
"flags": 2,
"init": 24,
"release": 0,
"ssthresh": 25,
"cong_avoid": 30,
"set_state": 27,
"cwnd_event": 28,
"in_ack_event": 26,
"undo_cwnd": 29,
"pkts_acked": 0,
"min_tso_segs": 0,
"sndbuf_expand": 0,
"cong_control": 0,
"get_info": 0,
"name": [98,112,102,95,100,99,116,99,112,0,0,0,0,0,0,0
],
"owner": 0
}
}
}
]
Misc Notes:
* bpf_struct_ops_map_sys_lookup_elem() is added for syscall lookup.
It does an inplace update on "*value" instead returning a pointer
to syscall.c. Otherwise, it needs a separate copy of "zero" value
for the BPF_STRUCT_OPS_STATE_INIT to avoid races.
* The bpf_struct_ops_map_delete_elem() is also called without
preempt_disable() from map_delete_elem(). It is because
the "->unreg()" may requires sleepable context, e.g.
the "tcp_unregister_congestion_control()".
* "const" is added to some of the existing "struct btf_func_model *"
function arg to avoid a compiler warning caused by this patch.
Change-Id: I1b95a340de4e7c7657bb0c81f8563bda0a0d4ae8
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003505.3855919-1-kafai@fb.com
This patch allows the kernel's struct ops (i.e. func ptr) to be
implemented in BPF. The first use case in this series is the
"struct tcp_congestion_ops" which will be introduced in a
latter patch.
This patch introduces a new prog type BPF_PROG_TYPE_STRUCT_OPS.
The BPF_PROG_TYPE_STRUCT_OPS prog is verified against a particular
func ptr of a kernel struct. The attr->attach_btf_id is the btf id
of a kernel struct. The attr->expected_attach_type is the member
"index" of that kernel struct. The first member of a struct starts
with member index 0. That will avoid ambiguity when a kernel struct
has multiple func ptrs with the same func signature.
For example, a BPF_PROG_TYPE_STRUCT_OPS prog is written
to implement the "init" func ptr of the "struct tcp_congestion_ops".
The attr->attach_btf_id is the btf id of the "struct tcp_congestion_ops"
of the _running_ kernel. The attr->expected_attach_type is 3.
The ctx of BPF_PROG_TYPE_STRUCT_OPS is an array of u64 args saved
by arch_prepare_bpf_trampoline that will be done in the next
patch when introducing BPF_MAP_TYPE_STRUCT_OPS.
"struct bpf_struct_ops" is introduced as a common interface for the kernel
struct that supports BPF_PROG_TYPE_STRUCT_OPS prog. The supporting kernel
struct will need to implement an instance of the "struct bpf_struct_ops".
The supporting kernel struct also needs to implement a bpf_verifier_ops.
During BPF_PROG_LOAD, bpf_struct_ops_find() will find the right
bpf_verifier_ops by searching the attr->attach_btf_id.
A new "btf_struct_access" is also added to the bpf_verifier_ops such
that the supporting kernel struct can optionally provide its own specific
check on accessing the func arg (e.g. provide limited write access).
After btf_vmlinux is parsed, the new bpf_struct_ops_init() is called
to initialize some values (e.g. the btf id of the supporting kernel
struct) and it can only be done once the btf_vmlinux is available.
The R0 checks at BPF_EXIT is excluded for the BPF_PROG_TYPE_STRUCT_OPS prog
if the return type of the prog->aux->attach_func_proto is "void".
Change-Id: If18eb6dd647e0c84713b21419ca582b10393d727
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003503.3855825-1-kafai@fb.com
This patch allows bitfield access as a scalar.
It checks "off + size > t->size" to avoid accessing bitfield
end up accessing beyond the struct. This check is done
outside of the loop since it is applicable to all access.
It also takes this chance to break early on the "off < moff" case.
Change-Id: Ie00dba5a1bc76bfb4b723f085b78d04fba70b309
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003501.3855427-1-kafai@fb.com
It allows bpf prog (e.g. tracing) to attach
to a kernel function that takes enum argument.
Change-Id: I5415fbd084e745291d444c159e573f030e65215e
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003459.3855366-1-kafai@fb.com
info->btf_id expects the btf_id of a struct, so it should
store the final result after skipping modifiers (if any).
It also takes this chanace to add a missing newline in one of the
bpf_log() messages.
Change-Id: Ie33e590b6a71e9a5b27e9e01bf26e9f6cc4e5e12
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003456.3855176-1-kafai@fb.com
This patch makes the verifier save the PTR_TO_BTF_ID register state when
spilling to the stack.
Change-Id: Ic4c8ac85c00385d28dcbf036f40afe72a2167b38
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003454.3854870-1-kafai@fb.com
The common use-case in production is to have multiple cgroup-bpf
programs per attach type that cover multiple use-cases. Such programs
are attached with BPF_F_ALLOW_MULTI and can be maintained by different
people.
Order of programs usually matters, for example imagine two egress
programs: the first one drops packets and the second one counts packets.
If they're swapped the result of counting program will be different.
It brings operational challenges with updating cgroup-bpf program(s)
attached with BPF_F_ALLOW_MULTI since there is no way to replace a
program:
* One way to update is to detach all programs first and then attach the
new version(s) again in the right order. This introduces an
interruption in the work a program is doing and may not be acceptable
(e.g. if it's egress firewall);
* Another way is attach the new version of a program first and only then
detach the old version. This introduces the time interval when two
versions of same program are working, what may not be acceptable if a
program is not idempotent. It also imposes additional burden on
program developers to make sure that two versions of their program can
co-exist.
Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH
command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI
flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag
and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to
replace
That way user can replace any program among those attached with
BPF_F_ALLOW_MULTI flag without the problems described above.
Details of the new API:
* If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid
descriptor of BPF program, BPF_PROG_ATTACH will return corresponding
error (EINVAL or EBADF).
* If replace_bpf_fd has valid descriptor of BPF program but such a
program is not attached to specified cgroup, BPF_PROG_ATTACH will
return ENOENT.
BPF_F_REPLACE is introduced to make the user intent clear, since
replace_bpf_fd alone can't be used for this (its default value, 0, is a
valid fd). BPF_F_REPLACE also makes it possible to extend the API in the
future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed).
Change-Id: I61ce8fb612063f9f3b423fb07c13ca9755dd82f1
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Narkyiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com
