Resuming from system suspend after handling EUD based spoof disconnect,
USB enumeration is not supposed to start until EUD based spoof connect
is notified. Hence check EUD based spoof disconnect flag before updating
vbus_active.
Also log important USB inputs state with dwc3_ext_event_notify() API
using dbg_log_string() instead of dev_dbg().
Change-Id: Iaf3ff08521248d0d59867d4dbcfdabc24d382bae
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Split up the different cases of "fastrpc_init_process" (like
static versus dynamic process create) into smaller functions, to
reduce the complexity of the function. Add utility function for
registering the service locators for remote process restart
notifications, to reduce code duplicity.
Change-Id: I7a0fb777c9d0b9a20e5f473c57aec0e647ec0e3b
Acked-by: Thyagarajan Venkatanarayanan <venkatan@qti.qualcomm.com>
Signed-off-by: Himateja Reddy <hmreddy@codeaurora.org>
Enable support for configuring IOVA alignment since some IOMMU clients
don't require any IOVA alignment and therefore would benefit from the
reduced fragmentation that would result.
Change-Id: Ide09a63d2efe1256d3424a9cebee4f330c07ca02
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Currently the IOVA framework automatically applies IOVA alignment to
provided IOVAs based on the requested IOVA size and the alignment configs
which are enabled.
Some clients who don't require any IOVA alignment would benefit from the
reduced fragmentation that would result from disabling IOVA alignment.
Add support to allow clients to disable IOVA alignment on an IOMMU domain.
Change-Id: Ifa6a75576e7a084c443abf38726d790b883f00b3
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
[lmark@codeaurora.org: cleanup change]
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Bandwidth vote values were being applied as Bytes-per-second but
the interconnect framework expects Kilobytes-per-second units. Fix
the error by using unit conversion macros provided by the
interconnect interface.
Change-Id: If2e921b7213e7f61459930b9739c6fa0c0257bf9
Signed-off-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
This change ports the recent changes made in
smcinvoke driver from kernel 4.19 branch to 5.4
branch. List of changes:
- mink: fix race condition in cb server exit
- mink: Add support of yield() interface in smcinvoke
- mink: fix incorrect server release
- SMCInvoke: Process requests for active clients
- smcinvoke: Add suspend resume support
- smcinvoke : Add logging in smcinvoke driver
- smcinvoke: Remove workqueue has sleeper
- smcinvoke : Add locking to shared variables.
Change-Id: Ica3c61470e75e3ef252f65e3c031613305710bdb
Signed-off-by: Anmolpreet Kaur <anmolpre@codeaurora.org>
These were helpful while working with extensions to NL80211_CMD_NEW_KEY,
so add more explicit error reporting for additional cases that can fail
while that command is being processed.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200222132548.20835-1-jouni@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Git-repo : git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Git-commit: f8af764bf1cb86bed615baae84e3bbb6e4d3912d
CRs-Fixed: 2671591
Change-Id: Ib3ccbec2914b3f1c8e4ce0039d04b09020f362e4
Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
If the HWO bit is set for the TRB (or the first TRB if scatter-gather
is used) of a request, it implies that core is still processing it.
In that case do not reclaim that TRB and also do not process
the request and give it back to the function driver.
Change-Id: Ia9fbaee443ad53d9a52909b0906a1d0ec1f2638a
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Make network interface devices inherit log levels from the
controller to allow level switches to reflect across MHI
clients.
Change-Id: I2412a738ba297031740d10570478c42f83b45c25
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Make userspace control interface devices inherit log levels
from the controller to allow level switches to reflect across
MHI clients.
Change-Id: Id8526f11acc1a0852811f9c78d7d7f073aa5c724
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Enable SPS driver for Lahaina GKI version.
SPS (Smart Peripheral System) enables the support of
all BAMs in the system which provide DMA
functionality to various peripherals.
Change-Id: I4a9f2f26182626141d268558952fe42eaa16c368
Signed-off-by: Ajay Prathi <aprathi@codeaurora.org>
Add support for PMIC Glink clients to receive notification when
the protection domain (e.g. charger PD) goes down and comes up
again. Similar to SSR (subsystem restart), PMIC Glink client can
pass a function pointer state_cb via which they would like to
receive when PMIC Glink state transitions so that they can
unregister from the framework (e.g. UCSI) and clean up their
state as needed.
PMIC Glink device supports PDR for the subsystem specified under
"qcom,protection-domain" property.
Change-Id: I178d3600cb9de0d2462df2cda76c80210963fbcf
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Haven hypervisor provides RM dt entries in a slightly different format
than has been used. Namely: the compatible string, capids are now
described by "reg" property, VMID/owner vmid is in a sibling DT node,
and names of some properties are changed. Thus, update RM driver to
parse accordingly. Common message queue dt parsing was moved into the
msgq driver helper function "hh_msgq_probe".
Change-Id: If3fe026bb6055267705a19d8ed7fd90ef0934270
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
A660 has some new GMU registers which needed to
be added to the snapshot.
Change-Id: I21bff35edf08e287e986161fbe52afe5de870b9b
Signed-off-by: Urvashi Agrawal <urvaagra@codeaurora.org>
make changes to support encrypted tz and qsee logs.
Change-Id: I4ad882845507f512a1a3edccbf6cb2d07bd3af5c
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Increase the snapshot size in A660 from 1MB to 2MB,
if the allocation fails fallback to 1MB.
Change-Id: I2186a1547d6ffc51060e3bd8cafb45c65ac270b1
Signed-off-by: Urvashi Agrawal <urvaagra@codeaurora.org>
Add display specific tag for memory sharing notifications.
Change-Id: I5cdad2c4e99fab7d3c71ae9e5865f99bfe5ccb05
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Enable the Haven memory notification framework to multiplex
memory resource notifications amongst clients for memory
resources on Lahaina and the trusted VM.
Change-Id: I4450d78ea58e01c57fdd65e734ceee7f91b1e4c8
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Supplement the existing Haven memory resource notification
interface with a framework that can be used to dispatch
notifications about memory resources being shared/released
to the resource owners.
Change-Id: Ibbc14f4b29d68ffb1a9d6b035c79867783872225
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
For wlfw_host_ddr_range_s_v01_ei from wlfw_host_cap_req_msg_v01_ei
message, the TLV type should be 0x1F instead of 0x1E.
Change-Id: I0221aeb79d15c0216356ad451bd5f10ab72b0468
Signed-off-by: Yue Ma <yuem@codeaurora.org>
This change enables spcom driver configuration as DLKM for GKI.
Change-Id: Ica83f7b5cec28ab227250e72c3ae09e6bef1a906
Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org>
On SSR, FW writes hang data in the carved out region from
existing DDR memory, the platform driver copies the hang
event data from the fixed offset to local buffer and sends
the buffer and length to host driver via CNSS_HANG_EVENT
event.
Change-Id: I5928821770086547b4fe17c30a967ea059b39394
Signed-off-by: Mohammed Siddiq <msiddiq@codeaurora.org>
Currently, get_service_location() expects "char *" for client
name and service name from clients. Update this to "const char *"
as they're not supposed to be changed by service locator. This
also helps clients to pass a "const char *" when it reads
strings from device tree using of_property_read_string_index().
Change-Id: I98d32524151b2486863e7fd51c56bc8f16262808
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
When switch mode with etr being enabled more than one time, it needs
to reset all the etr settings for previous mode instead of return busy.
Change-Id: I243a6d910bb3dd8ac9ca30dadbd1c6ab3cefd00f
Signed-off-by: Mao Jinlong <jinlmao@codeaurora.org>
There is no need to proceed link down recovery if link has been recovered
by retries during power on sequence.
Change-Id: I876f2e239b519d4230b5c115cdc05ff7650f5cd1
Signed-off-by: Yue Ma <yuem@codeaurora.org>
With the valid SMMU IOVA range WLAN firmware is able to detect invalid
host DDR access before SMMU fault happens.
Change-Id: I3a3aac4e1da7bb7747bfe3b352df33fc87221860
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Wait until all conditions are met instead of busy looping to check if
the channels are finished initializing.
Change-Id: I50bd3bad6ccf3f4957ed0a98cdceed45d49fe851
Acked-by: Chris Henroid <chenroid@qti.qualcomm.com>
Signed-off-by: Chris Lew <clew@codeaurora.org>
