hdd_abort_system_suspend() function currently uses pm_wakeup_hard_event(),
which does not work because device is not initialized. Switch to using
pm_system_wakeup() instead by calling qdf_pm_system_wakeup() wrapper.
Change-Id: Ib89eca5014729f6a2103e14c6f46540d1406a5a0
CRs-Fixed: 2566770
Correct the 6G operation info field values in HE operation IE.
And replace the legacy api with new 6G support api to calculate
channel center frequencies.
Change-Id: Icafdd72b386137a6a0c8d0de233d4fbdbd121610
CRs-Fixed: 2557233
Scenario:-
Two ACS request come in parallel, for two SAP startup
The driver started with one ACS, and scheduled the
other after the first one is complete,driver sets
a bit in flag of adapter that is
test_bit(ACS_PENDING, &adapter->event_flags)
and then schedule work when the ACS channel is
selected in the API wlan_hdd_cfg80211_acs_ch_select_evt.
After this driver got delete interface for the second
interface and as part of it in hdd stop adapter
driver checks that if the flag of pending ACS is set,
flush the pending ACS work, and reset the flag.
But the work is yet to be initialized, which would be done
as part of wlan_hdd_cfg80211_acs_ch_select_evt
and it is not yet completed as the first ACS is busy with the
ACS scan, and the scan callback and channel selection logic
is still yet to be done.
Fix is to initialize the work when the driver detects that
first ACS is in progress, and it needs to wait for the
first one to complete.
Change-Id: If706528f1afd6075144bff40611e82742df76368
CRs-Fixed: 2559703
Invocation of wrong api hdd_is_valid_mac_address() makes hdd_save_peer()
always return false due to which hdd_roam_register_sta() is skipped in
hdd_ndp_new_peer_handler() and can cause ping failure.
To fix this, use api qdf_is_macaddr_zero() instead of
hdd_is_valid_mac_address() in hdd_save_peer() to get the unused
entry in NDP peer mac table.
Change-Id: Id9aa6bcebb7fd168ee281065ebffe7227f9bc10f
CRs-Fixed: 2554502
Presently vdev delete is sent via serialization, which
needs a vdev reference. With the new FR to send the
vdev delete on the physical destroy in object manager
vdev delete cannot be sent via serialization.
Hence, disable the serialization for the vdev and
donot send the vdev delete via serialization.
Change-Id: I3afa34880ddaab68850ed235ec1451370d82e7dd
CRs-Fixed: 2566120
Remove legacy usage of channels in WMA layer and
use frequencies instead to incorporate 6ghz
frequencies as well.
Change-Id: Iba4a9ea723d5c03a4deeaffc5fbdf628f435eb67
CRs-Fixed: 2563924
The driver does not check the device DBS capability
and the DBS ini compatibility( ch select policy)
If the DBS ini channel_select_logic_conc is disabled
and HW mandates DBS capability then overide the ini
to always keep it enable.
Change-Id: I629fd8661f70b64808a55c4c9bdafa9608787b09
CRs-Fixed: 2551648
The driver does not check the device DBS capability
and the DBS ini compatibility.
If the DBS ini gDualMacFeatureDisable is disabled
and HW mandates DBS capability then overide the ini
to always keep it enable.
Change-Id: I2b31453f9c8a04cef7f943b30d3c28f844c276b5
CRs-Fixed: 2551644
As a part of 6GHz support, add support to parse channel frequency
attribute: QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY (in MHz)
in QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG command data.
Change-Id: I8e9956ef0db1a511f4252d6fb1f03201df54c3c1
CRs-Fixed: 2534010
As a part of 6GHz support, add support to parse channel frequency
attribute: QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT (in MHz)
in QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY command data.
Change-Id: Ic7bee5fe1123b82607e375c71a21b9744d67ea17
CRs-Fixed: 2533998
As a part of 6GHz support, add support to parse and send channel
frequency (in MHz) in QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS
command/event data.
Change-Id: I87879b4f8dd6a5c4ded2e89c527ba91432c9c48a
CRs-Fixed: 2533732
Add frequency to tSirChannelInfo, not replace because channelNum has
specail meaning.
Replace channelNumber of struct report_channel_list.
Use channel frequency in functions which process measurement request
Change-Id: I615b1f61c2810474dac6daf1eeb1ce19c2b1da33
CRs-Fixed: 2559283
Modify the following API's code and parameters to make
sure it is using frequency instead of channel:
csr_roam_select_bss
Change-Id: I9c68e173af01d7cb29672179a7bbffb354134f87
CRs-Fixed: 2564011
Open/close session callbacks are common for all the device modes
supported, so register once during the start_modules.
Change-Id: Ia94857ce4cc608be30e9974ddde8a6261d45f6e3
CRs-Fixed: 2555919
Modify the following API's code and parameter to make
sure it is using frequency instead of channel:
wlan_hdd_validate_and_get_pre_cac_ch
Change-Id: I55ccc3fefb829bcc95e434bdc56fe630fa837bd0
CRs-Fixed: 2561857
Modify the following API's code and parameters to make
sure it is using frequency instead of channel:
csr_roam_call_callback
Change-Id: I7dffcae95d8db53dd1d2a05745861681c4b35e13
CRs-Fixed: 2564024
In case of lowi, Supported bands are populated from
psoc->soc_nif.user_config.band_capability which is same as
that of ini file and not the intersected band support. In
function wifi_pos_populate_caps caps->supported_bands is
populated from psoc->soc_nif.user_config.band_capability
which may not be supported by firmware.
Fix is to update psoc->soc_nif.user_config.band_capability
with the intersected immediately after fetching intersected
band support to avoid incompatibilty.
Change-Id: I4771e3aff227d29916dafd70726daa9f0c87fef8
CRs-Fixed: 2538590
Currently there is no check for the monitor mode
interface in sched scan start/stop commands.
Add a check for monitor mode in sched scan start/stop
commands and do not allow sched scan stop in case of
monitor mode.
Change-Id: I316c3156c25a9b6e9c3d35aaca174a4f1f03f8f9
CRs-fixed: 2530755
In 11ax mode the extended rate IEs are not sent to firmware as part
of peer assoc. So if 11ax AP Doesn't advertise the OFDM rates in 2.4ghz
rates IE while include them in extended rate IE, the firmware doesn't
have the OFDM rates.
Thus once the AP switch channel to 5Ghz, as OFDM rates are not set the
Firmware asserts.
To fix this in 11ax send extended rate as well to firmware in peer assoc.
Change-Id: I059a35828d214bc843ad8ebab720fd695bc7f511
CRs-Fixed: 2561566
The current HDD callback in hdd_rx_flush_packet_cbk() does not validate
the adapter context properly. Instead of verifying the adapter magic,
verify the adapter itself is still valid through the adapter list.
Create a new function hdd_get_adapter_by_reference() to verify the
adapter reference.
Change-Id: I468bd55b2318635ad89087e6c6ad6097df68d405
CRs-Fixed: 2563654
wma_print_wow_stats does not do null validation for pointer vdev
returned from call to function wlan_objmgr_get_vdev_by_id_from_psoc
which can lead to null pointer derefrence.
Add NULL pointer check for vdev in wma_print_wow_stats.
Change-Id: I4fae47b303436bf9f2a4768995cea7640bc6feab
CRs-Fixed: 2564073
As a part of 6GHz support, add support to parse and send channel
frequency (in MHz) for QCA_NL80211_VENDOR_SUBCMD_DO_ACS command/event.
Change-Id: I9475f9392c6a15b6dc470fbaa2f25c1f4baf0be5
CRs-Fixed: 2533689
Modify the following API's code and parameters to make
sure it is using frequency instead of channel:
csr_roam_set_bss_config_cfg
Change-Id: I92ffda4ab9fa66340aa1cd75f3fcbb3b3e36b27d
CRs-Fixed: 2563211
Change vht_seg0_center_ch and vht_seg1_center_ch in acs_cfg
struct to vht_seg0_center_ch_freq, vht_seg1_center_ch_freq
respectively.
Change-Id: Ie3378376e6f31c239157c8eaaf3ceb22d2e35073
CRs-Fixed: 2564065
Change acs->start_ch and acs->end_ch to acs->start_ch_freq
and acs->end_ch_freq respectively.
Change-Id: I105cd618970c739340df29d58f635d01a68754d2
CRs-Fixed: 2564018
