Add fsa USB type C analog audio functionality and
update codec function calls from machine driver.
Change-Id: I493241d633d1f233930c714de08ad6ce8ece5b83
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
MBHC operations may take around 200ms to get stopped
during ssr. Match timeout for clock voting to be zero
to allow any pending mbhc operation to exited.
Change-Id: I82162e96595fb337f19192f58f1aa7792e8b0e90
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
VA macro on Kona has three TX codec DMA interface. The
current AFE driver only supports two codec DMA interface.
Add support to enable the third one in AFE driver.
Change-Id: Ie0f6241ef37bc03ad9adb1c4fe82f82468caec25
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Stop mbhc operations during ssr down to cancel
any pending detection sequences.
Change-Id: I6aa8c61c2cc74fc08adf57c58673acaa753ac322
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
VA HW macro supports three BE DAIs on Kona. Add support to
enable the third one.
Change-Id: I418a6a0bb1bcbc06fe71de0977d974432e1d6c22
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add BE DAI links of VA macro for bolero in Kona's machine driver.
Change-Id: I230bf7227c5436b5a2e8fed956337f87fcc86a4e
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
VA macro on Kona has three DMA TX ports. Add support routing
for the third VA macro DMA TX port to add backend and the
corresponding front ends.
Change-Id: I07298045292443af1220d9b95f4cd7aee0b79c66
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
VA macro in Kona has three DMA TX ports. Add a new VA
DMA TX CPU DAI in the DSP DAI driver to use it on Kona.
Change-Id: Ic144dbed1bd63af6f0150f854fdb74d57e156839
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Userspace takes 10 seconds to close the session when
pcm_start fails due to concurrency with PDR/SSR.
Match the SSR timeout in va macro to user space
session tear down delay.
Change-Id: I1e0fb4bdb25a43cbe7c345a47c115410b964e6eb
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Invoke swr device down callback to set soundwire master
to reset state before setting ssr down flag. This is to
ensure master is reset to proper state after ssr/pdr.
Change-Id: Ifb5548f603ac03b772006314f4723c0ac0176928
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Hold system suspend when hardware wakeup interrupt is
received to resume soundwire master.
Change-Id: I99a58aa7d28cfa514d72bacc8c6fc6e95fbe038a
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Do bank switch to default bank during ssr/pdr as master
is reset to default state. This avoids wrong state of
swr master during pdr.
Change-Id: I86a7bd53d471e9d864d25dcb84ad8fe12151cc0d
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Reset swr only during init or ssr-pdr scenarios.
Do not reset swr during clock stop, which would
result in bad state of master and cause error
interrupts.
Change-Id: I88e071921409a5b5797aeedb8e7cb57cb5d5bb9a
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
BT sink devices have a limitation on the packet sizes
they can receive and handle from BT sources. AAC encoder
can produce output frames which can vary in size based on
content being encoded. If frame size exceeds MTU size of
BT sink device, it will lead to incorrect decoding of
frames in BT sink.
Add a frame configuration parameter (MTU/Peak bitrate)
for AAC encoder to solve this problem.
Change-Id: Ia7795049e982400b0b3657b0b3a8990fc6920e38
Signed-off-by: Aniket Kumar Lata <alata@codeaurora.org>
ADM open is failed due to payload size not getting updated
with ec reference size. Update EC reference port only if
EC reference channels are configured.
Change-Id: Ic2dd6a3cf805c1ea40d71d0b62b6e867167d169e
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
TX_CDC_DMA_TX_0 supports three channels, therefore it
can be used for rx_macro_echo. Add required backend dailink.
Also remove AMIC4 from ignore_suspend as it is not used for talos.
Change-Id: I74b7adca9fa4001866232c1a9173e865c2a169c4
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Correct name of widgets for tx macro from
TX SWR_MIC to TX SWR_DMIC. Also assign codec pointer
to rx_priv before calling rx_macro_init_bcl_pmic_reg.
Change-Id: I268d79413c53bcd2d8e7a391859b71b7a7e3f64e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add mixer control and routing to enable echo reference
for rx_macro.
Change-Id: Ic1095eaa8024f2cb61722609daae94bc645b263b
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Mono headsets have only one channel connected. Hence make cross
connection decision based on the voltage result of alteast one
channel showing cross connection.
Change-Id: I22a4ea7e25d09e785e7141f4a74c2830fdff555e
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
