Compander disable sequence does not get called
after headphone playback on FM. This results
in mute at one channel. Compander clock
should be disabled at the end to resolve the mute.
CRs-Fixed: 2102126
Change-Id: Ia47fb1c393db255b52a965173a769896768f245e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Check if GPIO is valid before free to avoid crash.
Change-Id: Ie052e5ff1776ad57ae9c1d0f00873ba29e11f78f
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Deregister sound card with audio notifier when removing driver to
avoid crash.
Change-Id: I4f22fefce519e8dab25901337fdf2e62044090ed
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Deregister lpi with audio notifier when removing driver to
avoid crash when rmmod and insmod again.
Change-Id: Ibcaf272e6405ef8403b3ac66af5572050fa1092e
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Remove any child devices associated with this
codec driver so that rmmod and insmod again will
run without issues.
Clear MBHC setting during tasha_remove.
Change-Id: Icad9b2ad21601525c68c5d151cd664aa6060e911
Signed-off-by: Meng Wang <mwang@codeaurora.org>
When CONFIG_SND_SOC_EXT_CODEC/CONFIG_SND_SOC_INT_CODEC is set to m not y,
"ifdef CONFIG_SND_SOC_EXT_CODEC/CONFIG_SND_SOC_INT_CODEC"
would be false which would cause init functions as dummy functions.
Change to "if IS_ENABLED" and When CONFIG_SND_SOC_EXT_CODEC/
CONFIG_SND_SOC_INT_CODEC is set to y/m, both would set the
condition to true.
Change Makefile to compile machine driver for internal/external
codec as one module.
Change-Id: Ib72f95a24e8a4e657a1e9efc655f92a397b44d32
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Enable all five TDM interfaces to configure clock frequency during
the runtime.
Change-Id: I066ea2034509dee2350205ee887dd3eeb6f5389b
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Update cpu_dai_name of quin_tdm from tdm group id to
port id for sdm670 internal and external codec machine
driver to fix soundcard registration issue.
Change-Id: I2f7ed4ea983c1d457c4d2940c33f5bb7440ddee6
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
During ADSP SSR, unless all APR clients are de-registered, Glink
channel will not be closed, which will cause Glink channel to remain
in stale/unusable state after ADSP SSR. Fix this by adding APR reset
logic in LSM driver.
Change-Id: Idec26836cfa4ecbacc557996339facd84ac19668
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add support to set number of channels and channel mapping to DSP
as per the info received from ACDB files along with topology
for a device in voice usecases instead of reading from
backend configuration. When topology specific channel info is
not supported, send the default no of channels and
channel mapping as per backend to support backward compatibility.
CRs-Fixed: 2110934
Change-Id: Iad512474fc25c906d97513f6648cd8ba6244eda1
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add support for HDMI and DP for S24_3LE bit format.
This allows playback of 24bit audio on the external
device.
Change-Id: Ia6e1148b2e5d13cc0ff6f2372d61c83c3e704255
Signed-off-by: Ben Romberger <bromberg@codeaurora.org>
Pop noise occurs during switch from handset to speaker mode
during voice call. This is because sufficient delay
is not provided for tx to unmute. A delayed workqueue
that will do unmute at the end solves the issue.
CRs-Fixed: 2101423
Change-Id: I1ae7068b23158bb8428d5b96e9f65fb05a67ff7e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Update sizeof lpi register offset to 32 bit to
accommodate all register offset for sdm670.
Change-Id: I9a3fdb56f9faf6c0aff627cbedaa54db606d2434
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
These includes aren't used and the file will go away in the
future, so just drop it.
Change-Id: I9bfcd39fd775e16765c46ea99da087292fe2e461
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add dummy function for swrm_wcd_notify to avoid
compilation errors when configuration options
'CONFIG_SOUNDWIRE' and 'CONFIG_SOUNDWIRE_WCD_CTRL'
are not selected for a target.
Change-Id: Ie12d2df8777934494f0f8607d846e2d1ec49f2a6
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add support to configure MI2S gpios from machine
driver.
Change-Id: I561fdc775c63fd7b31d41a3053956d1643bea566
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
Add sclk and mclk support for quinary MI2S interfaces for
sdm660. Also, update MCLK IDs for secondary and quaternary
MI2S.
Change-Id: If6271224caffbf1623939d409e3e031d5a0c8423
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
Separate compilation of analog and digital codec and add
support to compile them as dynamic module.
Change-Id: I81f01bf60aef71f67e025fa4ff1ba805a960e61d
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
Add size check to ensure cal data bytes size fits inside
the cal data when copying to user space buffer.
CRs-Fixed: 2110256
Change-Id: I511999984684a9db4aaf1cf2c65eb1495c36980f
Signed-off-by: kunleiz <kunleiz@codeaurora.org>
