Merge "Broadcom devicetree-arm64 changes for 4.6" from Florian Fainelli:
This pull request contains Broadcom ARM64-based SoCs device tree changes:
- Anup adds additional nodes to the Broadcom Northstart 2 Device Trees: SDHCI
(iProc-compatible), ARM SP804 timers, ARM SP805 watchdog
- Anup also adds a binding documentation for the ARM SP805 watchdog since there
was not one in tree before
- Ray adds PCIE root complex nodes to the Northstar 2 Device Tree nodes, using
the iProc-compatible binding
- Jayachandran C. adds binding documentation for the Broadcom Vulcan processors and
reference platforms
* tag 'arm-soc/for-4.6/devicetree-arm64' of http://github.com/Broadcom/stblinux:
dt-bindings: Add documentation for Broadcom Vulcan
arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2
arm64: dts: Add ARM SP805 watchdog DT node for NS2
dt-bindings: watchdog: Add ARM SP805 DT bindings
arm64: dts: Add ARM SP804 timer DT nodes for NS2
arm64: dts: Add SDHCI DT node for NS2
Following the addition of the Alpine MSIX controller driver, add the
corresponding node in the Alpine v2 device tree.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Extract clock information from EP108
- Sort GPIO node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbO/SIACgkQykllyylKDCEL9QCfdcFczSmk3OWvubtp1/d7YoMs
MhoAn33UBIqTGcmYgpRljfhWWStW1eRE
=wlZ0
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-dt-for-4.6' of https://github.com/Xilinx/linux-xlnx into next/dt64
Merge "ARM: Xilinx ZynqMP dt patches for v4.6" from Michal Simek:
- Extract clock information from EP108
- Sort GPIO node
* tag 'zynqmp-dt-for-4.6' of https://github.com/Xilinx/linux-xlnx:
ARM64: zynqmp: Extract clock information from EP108
ARM64: zynqmp: Keep gpio node alphabetically sorted
We should set SW15 to pin 2-3 side on the board before we use CN9
as USB host or peripheral.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This board has a MAX3355 chip. However, we cannot use the extcon/max3355
driver because the ID pin doesn't connect to a gpio pin (in other words,
it connects to the SoC specific pin).
And, the phy-rcar-gen3-usb2 driver cannot handle such a chip for now.
So, this patch enables usb2_phy of channel 1 and 2.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the exposed SD card slots. The on-board eMMC needs to wait until we
fixed the 8bit support.
Signed-off-by: Ai Kyuse <ai.kyuse.uw@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ai Kyuse <ai.kyuse.uw@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[wsa: squashed some fixes and added mmc-caps]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Device tree part of the Armada 3700 support:
- binding for the Armada 3700 SoCs
- device tree files for the SoCs and a board
- tidy up the Marvell related files
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbEltYACgkQCwYYjhRyO9UZxACgi1NcAIrem831BSMOHVRBphAB
qT8An3bCV/tPx2QYz0kKYmGfyb7VtTzo
=IdEY
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.6-1' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.6 (part 1)
Device tree part of the Armada 3700 support:
- binding for the Armada 3700 SoCs
- device tree files for the SoCs and a board
- tidy up the Marvell related files
* tag 'mvebu-dt64-4.6-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: add the Marvell Armada 3700 family and a development board
devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
Documentation: dt: Tidy up the Marvell related files
Documentation: dt-bindings: Add a new compatible for the Armada 3700
Signed-off-by: Olof Johansson <olof@lixom.net>
This is a fix-up patch based on the review comment from
Arnd regarding:
* fix ccn504 address in the node name
* remove kcs interrupt-name
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
gpio-key,wakeup to the more generic wakeup-source property.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJWuwVbAAoJEPOmecmc0R2B5b4H/j869d1n99jqv+we15c0B87e
bYjNk9UKW4me+rrpU4PLBVyj15KYj+otAS/aB9S5Z+GckRWHLIB4FppE+cCyqAvb
jmLle+vrMcni23AfbVB9nBzcx/PpE+G0NB9s/PDo07B4MxpeShvYDCW/x3u7ak2r
VotY8hqp3SI7JVXskknmiJtaxA9RI+CpVPucBJ6SZL5CYFgLSYqo0JiW7ArRWoeb
/vdbmMN+9CwbYAaWPzkVgPvCTNqsKJeP3K05u+zxOqV++YIva8H2Ml59euxC3CsY
0IssrCVb0iwlBEF+Lxya/tJJe7lZ5iTcjfE/NMI4lmxvFTUFNMKt8v79kLIKEx0=
=+Sh9
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Define the tuning-related mmc clocks and move from
gpio-key,wakeup to the more generic wakeup-source property.
* tag 'v4.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: replace gpio-key,wakeup with wakeup-source property
arm64: dts: rockchip: add rk3368 tuning clk for emmc and sdmmc
Signed-off-by: Olof Johansson <olof@lixom.net>
Update arm/cpus.txt to add "brcm,vulcan" CPU. Add documentation
for Broadcom Vulcan boards in arm/bcm/brcm,vulcan-soc.txt
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
MT8173 E1 chip has one bug that if turn off USB power domain, vcore
power will also be off, thus cause modules using vcore power domain
fail, like MMC. The E1 chip only found on MT8173-evb board and this
board only has E1 chip, so implement this as a board specific
workaround.
Pwrapper use vcore power, so add pwrapper using USB power domain to
keep USB power domain not to zero and disabled.
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Besides the distributor and the CPU interface the GIC-400 additionally
supports the virtual interface control blocks and the virtual CPU interfaces.
Add the physical base addresses and size for these.
See
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0471b/index.html
-> 3.2. GIC-400 register map
and Linux kernel's
Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
for more details.
For the at GICH Virtual interface control blocks at 0xf1040000 cover the
whole 128kB (0x20000) range. This is done based on the advice from Marc
Zyngier http://www.spinics.net/lists/arm-kernel/msg483139.html
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add initial dtsi files to support Marvell Armada 3700 SoC with Cortex-A53
CPUs. There are two members in this family: the Armada 3710 (Single CPU)
and the Armada 3720 (Dual CPUs).
It also adds a dts file for the Marvell Armada 3720 DB board.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The Marvell Armada 3700 is a family of ARMv8 CA53 SoCs. This commit
introduces the Device Tree binding that documents the top-level
compatible strings for Armada 3700 based platforms.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Over the last releases we have added more and more Marvell related binding
directly in the arm directory. It's time to have our proper directory
inside it, and move all the files in it.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
The AHCI interfaces used in the Armada 3700 has a few differences with
the one used in the Armada 38x, so it deserves its own compatible string.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Add a single r8a7795 INTC-EX device node to support
external IRQ pins IRQ0 -> IRQ5.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Cortex-A53 L2 cache-controller.
The L2 cache for the Cortex-A53 CPU cores is 512 KiB large (organized as
32 KiB x 16 ways).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the missing "cache-unified" and "cache-level" properties to the
Cortex-A57 cache-controller node.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Use GIC_* defines for GIC interrupt cells in r8a7795 device tree.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables PCIe0 and PCIe4 for NS2 by adding
appropriate DT nodes in NS2 DT.
Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We have one ARM SP805 watchdog instance on NS2 for non-secure software
hence this patch adds appropriate watchdog DT node in NS2 DT.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Pramod KUMAR <pramodku@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The ARM SP805 DT node is already present in various DTS files.
This patch adds missing DT bindings documentation for ARM SP805.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We have four ARM SP804 dual-mode timer instances in NS2 SoC
hence this patch adds appropriate DT nodes for NS2.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Pramod KUMAR <pramodku@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The IPROC SDHCI driver works fine for SDIO 3.0 on NS2 so let's enable
it for NS2 SoC in NS2 DT.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy
"gpio-key,wakeup" boolean property to enable gpio buttons as wakeup
source.
Few dts files assign value "1" to gpio-key,wakeup and in one instance a
value "0" is assigned probably assuming it won't be enabled as a wakeup
source. Since the presence of the boolean property indicates it is
enabled, value of "0" have no value.
This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property which inturn fixes the above mentioned issue.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add device tree file for AMD/Linaro 96Boards Enterprise Edition Server
(Husky) Board. This is based on the AMD Seattle Rev.B0 system
Signed-off-by: Leo Duran <leo.duran@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add device tree files for AMD Overdrive boards which comes with
AMD Seattle Revision B0 and B1 SOCs.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add AMD XGBE device tree file, which is available in AMD Seattle RevB.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add new GPIO device nodes and fix clock on gpio0.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add new SATA1 device node, and fix the register range size of SATA0.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add new i2c1 device node, and fix the incorrect clock frequency.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch fixes incorrect sizes of the GICv2 device tree node.
This has triggered error message when booting Xen hypervisor.
Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
