For low mem config, use user configured max tx descriptors to limit the
allocation of software tx descriptors.
Use dp_txrx_pflow_update_pdev_params function to print stats and to update
pdev param.
Change-Id: I8fa6f0bb8841de68e8dc205ffcb0fde264f1b0e0
CRs-Fixed: 2414452
The objective is to remove qcacld-3.0 redundant macros and
replace them with the converged enums exposed in
reg_services_public_struct.h
Change-Id: I3f106f7f9f8a533b1964d3ea256a2fef5e4bbd4f
CRs-Fixed: 2416532
Convert pdev and vdev param conversion array to pointers
and allocate them only if conversion is required.Use run-time
NULL check of pdev and vdev param pointers for conversion
and remove CONFIG_MCL compiler flag.
CRs-Fixed: 2393422
Change-Id: Ica1c81f5f3c3a4b7e31dcb70c63471898c36933d
This subcommand is used to update zigbee state and specified wlan durations
to enhance success ratio of zigbee joining network.
NL attributes qca_mpta_helper_vendor_attr is used to deliver the parameters
to host driver.
Change-Id: I7ec82e11fa3aaea88f20e1c04c464153549bf44c
CRs-Fixed: 2413320
Agile Dynamic Frequency Selection refers to the mechanism in which DFS
scanning takes place on a separate dedicated synthesizer
(agile DFS sythesizer), while the access point receives data on a
separate channel. Once DFS scanning completes in the aDFS
synthesizer, AP can switch its primary channel to this preCAC done
channel, without Channel Availability Check of 60 seconds.
Hawkeye has native support for A-DFS unlike Cascade, which uses a
dedicated radar detector for background scanning. Each Iron radio has
two synthesizers, one of which can perform A-DFS.
Host driver configures an A-DFS channel along with maintaining
pre-CAC Done list of channels. PreCAC list caching of channels
is currently limited to ETSI domain.
Once off channel CAC completes in the agile channel, HOST receives O-CAC
complete indication. O-CAC status included as a part of event params
has information if the preCAC is successful or not. HOST also receives
indication through radar indication event handler, upon RADAR detect.
The detection is read as agile channel RADAR using the detector id value.
For SBS mode, there can be 2 pdev's which can comprise of DFS channels.
Although the preCAC list is separate for each pdev, preCAC timer is
limited to a single pdev.
The following commands are to set/get preCAC enable. Prerequisite to
enable preCAC includes regdomain to be in ETSI along with agile capability
enabled in the target.
iwpriv wifiX get_preCACEn
iwpriv wifiX preCACEn 0/1
Change-Id: Id9f022f885ccd9200167cdbc779a811d622d09da
CRs-Fixed: 2385536
Add change to fetch the activation status for the command in the
active queue of a given vdev.
Change-Id: I2ef87b5423f3749eb68e50147c9a30115492197c
CRs-Fixed: 2415236
Use the time stamp taken during the updating of RSSI value to
calculate the time elapsed when the IOCTL call happens. Return
that value as delta age in ms.
Change-Id: I96d36a7a132b7a327d9d5a5ba3a318a82889ebd5
CRs-Fixed: 2394910
The rx descriptor may be invalid if RBM is incorrect.
Check the RBM value before fetching the rx descriptor.
Change-Id: I12cc99ceb31b8bbf0127591e1c275b13264eb80c
Clean up CONFIG_MCL and add all below scan
related macro in the defaul_defconfig file.
Macros related to WIN will be part of WIN Kbuild.
MAX_SCAN_CACHE_SIZE 300
SCAN_MAX_REST_TIME 0
SCAN_MIN_REST_TIME 0
SCAN_BURST_DURATION 0
SCAN_PROBE_SPACING_TIME 0
SCAN_PROBE_DELAY 0
SCAN_MAX_SCAN_TIME 30000
SCAN_NETWORK_IDLE_TIMEOUT 0
HIDDEN_SSID_TIME (1*60*1000)
SCAN_CHAN_STATS_EVENT_ENAB (false)
Change-Id: I9c8cb010111c6255309f36209cabc011e32f3f0f
CRs-Fixed: 2412734
Add nl vendor id and attributes for peer stats cache flush.
Peer rate statistics is per-peer cached data in host driver,
these statistics needs to be flushed to user space on
synchronous/asynchronous events.
This command is used to flush per-peer cached statistics
to application
CRs-Fixed: 2397918
Change-Id: Ie75e11e5949e754dd4779f88f1f6aeb984873f32
In case NAPI is disabled on a CE (and tasklets are used instead), donot
update NAPI stats for the CE.
Change-Id: Iaf464df9a8520d705f73f7be355736ae2f1aaf5b
CRs-Fixed: 2412599
Log of level err will call printk to print on uart, may make
current thread sleep or delay > 10ms, then wma_roam_synch_event
need longer time to handle, LFR3 roam need longer time.
Change-Id: Ibdd58f74fcf5cf3de8e2b06166c375a2ce634cb5
CRs-Fixed: 2411278
Add Diag log support for logging cold boot calibration
data sent by firmware via cold boot cal wmi event.
Change-Id: I932fd5f87667498b77ee13ca5b3ce08d6001cdf0
CRs-Fixed: 2413451
Add modules and API's to issue command WMI_NDP_CMDID. This
command, for now, can request Firmware to terminate all NDP's
associated with the given vdev. Add module that extracts
event information from event WMI_NDP_EVENTID. This event acts
as a response to command WMI_NDP_CMDID, and carries NDP
related status information for the host. Extract mac_id from
the updated TLV of NDP confirm and schedule update events.
Add modules and API's to support new NDP command and event.
Change-Id: Ibf6312cb3669b5e62ada3f4ad852be87f14ae09f
CRs-Fixed: 2384535
Several qdf_*_outline() APIs exist which are straight aliases to their
regular qdf_*() counterparts. Remove them, and update any callers to use
the regular APIs instead.
Change-Id: Ibe6e9cced521b93061e89690ab817ceafe49a469
CRs-Fixed: 2408267
Fix the type for nan_serialized_cb and remove unnecessary
type casts from other callbacks.
Change-Id: Ie4e45f5a7e9fc17eb1c45fa18160e3bbd47151fe
CRs-Fixed: 2402989
Delay counters per TID have been implemented for following types:
1. Linux stack to hw enqueue delay
2. HW enqueue delay to tx completion delay
3. TX interframe delay
4. RX interframe delay
5. RX frame delay from ring reap to networking stack
Change-Id: I836596cbd878a43955c18b4981cb5b7b43d4df5e
Do not use MCL in the macro. Use feature name to define macro.
This is for CONFIG_MCL_REGDB cleanup.
Change-Id: I5a3f40da74e2c4476dbf2d4d4200502b9b9e9653
CRs-Fixed: 2411991
target_process_bang_radar_cmd should be defined with meaningful body only
when WLAN_DFS_FULL_OFFLOAD is defined.
This is for CONFIG_MCL cleanup
Change-Id: Id038231e6aa967c68674f40ef4247ac023313b71
CRs-Fixed: 2411981
In the current implementation, from qdf wake lock api, diag log api
invocation is controlled by macro CONFIG_MCL.
Aim is to clean CONFIG_MCL in qdf_lock.c
Change-Id: I16a1a46a2ebc255ed092a1fdd05f127c7e542a5e
CRs-Fixed: 2411636
In handling addba request, if we receive a request
for a tid that is in IN_PROGRESS state, we ignore
this new request.
Change-Id: I71e3f78cf43f25c184161669a359a4b703cab3cd
Crs-fixed: 2408140
Add members in the ops framework and the respective
function definitions for supporting 8021pcos to tid mapping.
Change-Id: Iaa15efbda0824cecb1b2db67ea8b6ee585a8d56c
Allow SSR during driver resume. Assume firmware goes down during driver
is in suspend state. Avoid get into bad state and wmi access during driver
resume.
Change-Id: Ie1689e0b080f940666fbbb19c9f0e3b0fecfe564
CRs-Fixed: 2390031
On low memory platform rx_pkt_header tlv is not subscribed to get a
savings of 128bytes in skb. This is required to reduce the skb size from
4K to 2K on 32-bit platforms. Use HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG
message to unsubscribe rx_pkt_header tlv for rxdma ring.
Change-Id: Ie684f1ca1de9c824a869b4e13fd0ee1d068004e7
CRs-Fixed: 2408424
Do not process RX packet header TLV for low memory config profile.
Also, drop decapped frames in invalid peer processing function.
Change-Id: Ifc7721bb25d85c7e277bebf4b962d2f1bfea150c
CRs-Fixed: 2395508
Add change to send correct mac address
peer_flush_params->mac_id to flush tids
during the process of sending STOP cmd to FW.
Change-Id: I16dd0263a5d3d953da9c1d107136f5824c7736cd
CRs-Fixed: 2408175
wifi up/down will cause soc stop and soc
start which will allocate rx desc pool
array memory for each wifi up
This creates memory fragmentation issue
hence reuse Rx descriptor pool array
across wifi up/down and free only nbufs
CRs-Fixed: 2394666
Change-Id: Ic897c733dfba3d8829e2f2f51099cd615b8a7ea2
qdf_nbuf_cat API used to call skb_free
on src address but was later modified
so that the caller of qdf_nbuf_cat is
responsible for freeing the src memory
Due to this change in the API, the
freeing of src memory on caller side
was not taken care and will lead to
mem leak
Hence add qdf_nbuf_free after calling
qdf_nbuf_cat if it returns success.
If qdf_nbuf_cat returns failure, then
freeing is taken care as part of error
handling in parent function.
CRs-Fixed: 2411320
Change-Id: If50eb9279d0cf26a0cf57444cb69e56f11995720
In the case of WOW resume due to RA match event, driver will
update the protocol and destination type WOW stats after parsing
the data packet. The same stats are again incremented under RA
match case in TX op that is called in wma_inc_wow_stats. This is
causing counters to increment twice for each packet. Therefore
remove the increment of wow stats from TX op case.
Remove redundant counter increments under RA match event in
target_if_cp_stats_inc_wake_lock_stats.
Change-Id: I10486d083175772f976542a38364ba964c8e1a87
CRs-Fixed: 2406975
In wlan_cfg80211_scan(), when "DNBS check fails", mem free of scan req is
done. Mem free of scan req is done again at the label "err" which would
end up in a double free.
Change-Id: Ib757832c1bd54372fba45cbc5ee306d0d7b233b0
CRs-Fixed: 2408703
A service bit is used to indicate support for MBSS IE.
This is set as capability in host at psoc level.
In host, we also maintain a flag for user to configure
MBSS support at pdev level. It could be used in future.
Change-Id: I31a27a755fb027de93bfe6c9639fdbda9693bace
CRs-Fixed: 2403030
Check for completion status of the ppdu based on
HTT_PPDU_STATS_USR_COMMON_TLV and
HTT_PPDU_STATS_USR_COMPLTN_ACK_BA_STATUS_TLV.
Update the stats only when completion status is ok else
update retry and failed frames count.
Change-Id: Iac7730715f853746d77873488b7886e7beed467d
CRs-Fixed: 2390383
When user sets the vendor ie for probe request frame, it is not
included in the broadcast probe request sent by FW.
Add support to send vendor ie info in scan start command to FW. Therefore,
FW can include this vendor ie in the broadcast probe request frame.
Change-Id: Ie5fc0c074bd7543568a135d3ef4662bf09b274f6
CRs-Fixed: 2400265
Currently the driver returns EINVAL, instead of EBUSY if
the driver encounters a case of simlutaneuos scan, and
DBS scan is disabled for user space, and thus it may lead
to failure of OBSS scan, which can further lead to SAP
fail.
Fix is to return EBUSY intead of EINVAL, so that hostapd
can try to get the scan module perform a scan, which can
increase the probablity of SAP bringup.
Change-Id: I798e3d1ad0f62a5240603b4344963cb3ee637c13
CRs-Fixed: 2403499
