SDPM driver will monitor different clocks and write the clock rate into
the respective CSR register. This document explains the devicetree
properties required by this driver.
Change-Id: Ieb8efb83cc130716839a6830e104a3c951edb1b2
Register Policy Engine recommendations as sensor with thermal framework.
Thermal framework can mitigate cooling devices for the recommendations
from policy engine sensor.
Change-Id: Ic401b438098d9336a14d90af61e45b319601141d
Add cooling-cells property to enable the battery mitigation to be
referenced in thermal zone devicetree configurations.
Change-Id: I8fbc011660ad9446dfa347388ab2a69f1309f3f5
hyp core control driver provides machanism to isolate/un-isolate CPUs
as needed by other virtual machines in the system.
Change-Id: I9aae672f13ca54614f70fa618eca32c9f3f0d2ff
Add PMIC die temperature mitigation for Lahaina. The mitigation will
trigger at the first PMIC alarm at 95C.
Change-Id: I55f1c7b0eb637e417a3baabdd8d9b245439062cb
Add thermal zone to monitor modem junction temperature for 100C and
trigger mitigation using the modem junction QMI cooling device for
Lahaina.
Change-Id: Ib28a46680fbdc19979aa3b72d34ccee73090ad1e
Update the Qualcomm Technologies, Inc. PMIC GPIO binding
documentation to include compatible strings for PM7250B, PM6350
and PM6150L PMICs.
Change-Id: I23673981435fd5e95e416a05bd148b3b244e10ac
Add stub interconnect devices for aggre1_noc, aggre2_noc,
camnoc_virt, compute_noc, config_noc, dc_noc, gem_noc,
ipa_virt, mc_virt, mmss_noc, system_noc, gem_noc_display,
mc_virt_display, mmss_noc_display. This will allow consumers
to get their path and set bandwidth constraints on them.
Change-Id: I3c7b4af80eb8a3a644847070bc64c518c509dbb2
Add interconnect device bindings. These devices can be
used to describe any RPMH and NoC based interconnect devices.
Change-Id: I2c828560cb4c3979faff88d61569ee1a72800e64
Add interconnect device bindings. These devices can be
used to describe any RPM and NoC based interconnect devices.
Change-Id: Id7ab380c37f652367da5a5fb9188ed9a29cbe0c0
This is snapshot of the rpm-smd-regulator.txt as of msm-4.14
'commit 637a26bd203d34ce("regulator: rpm-smd: Add support for
set_load function.")'.
Change-Id: Ibcd863e65238d1ff10aee235b570000e698321b6
Add snapshot of device trees for PM6350, PM7250b and PM6150l
with base nodes for revid, pon, gpio, rtc and temp alarm
peripherals.
Include these three PMICs with PMK8350 for holi.
This snapshot is taken as of msm-4.19 commit f013531fb889
("Add eMMC inline crypto engine node for scuba") with the following
modifications:
- removed charger,QG, pd_phy from PM7250b
- removed flash, WLED from PM6150l
- removed GPIOs and thermal_zones from all PMICs
- corrected address format for all PMICs to match usage on kernel 5.4.
Change-Id: Ib3304759a0b99bf7f51b45460b7717c40704dbe5
