Check the audio client and apr before retrieving the
service_id and avoid the race condition b/w q6asm_session_free
and get_service_id calls with mutex lock.
Change-Id: I05c5fb872f866c79c909123b595df345da828967
Signed-off-by: Prasad Kumpatla <nkumpat@codeaurora.org>
Unmap and free DMA memory in case of ION SMMU
mapping failure from PVM backend or MMHAB.
Change-Id: I2d2780941ba6922534654afa463a011f27ef7c66
Signed-off-by: Derek Chen <chenche@codeaurora.org>
In set param for IIR sidetone in AFE, instance ID
assignment is done to param ID. Correct the assigment
to fix this.
Change-Id: I3fc6011631a6b581facddc9c417e219ed25cc3a4
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
When CPU buffer is not available, continuous error
log prints leads to excessive logging. Make the error
as debug log to avoid this.
Change-Id: Ic26006b4975fbe3d5467203d145a517c0067c296
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
-Register for the widgets and interconnections in routing
driver only when the respective interfaces are supported.
-Create a separate array for TDM BE dai links.
Change-Id: Ic1570ef432c76556aff8c592e12c879aed50e4ef
Signed-off-by: Harshal Ahire <hahire@codeaurora.org>
Update the sample interval of soundwire frame shape for quad mic
audio capture usecase.
Change-Id: Id45bc442eac982137d0a4e039925834e6bf42b61
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update audio capture sequence to avoid multiple bank switches
during multi mic usecase that helps in reducing the latency
for path setup.
Change-Id: Idac8bca97b3503cdbf82bb482e8a297a1fd20893
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update offset1 of soundwire slave devices in a multi mic usecase
for proper audio capture from the soundwire mics.
Change-Id: If81ab1c2defeacb87b917fb6e3645c6df866f679
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
The haptics module in some PMICs has SWR slave data port which connects
to Bolero SWR RX port and it can receive PCM data from that port and use
it as the pattern source to play the vibration. Add the driver to
support it.
Change-Id: I5e6811ac8d81a60c3cd226029ef22ee12ed46f1d
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Add variable bit rate mode support for aac codec.
Change-Id: Iedd9fe0df2d3a12e3d4e6c2916305399da10873f
Signed-off-by: Manisha Agarwal <maniagar@codeaurora.org>
Use sound wire definitions for channel rate (MHZ format) instead
of hard coded values.
Change-Id: I47782199d8b674a17984e5048a29c63267cf8941
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add support to disable dynamic port map via device tree
property.
Do not update master clock when dynamic port map
is disabled for a sound wire master.
Change-Id: I9f9344866faa4d1c342787e014102d9182ed56ae
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
After playback on speaker, remove from soundwire group to
properly close the soundwire port configuration.
Change-Id: I278e7510869200bc1236eb45968bc8d986a93a96
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
From kernel 5.4, device node properties with
-gpio/-gpios suffix in the name is expected to define
gpio node properities like "#gpio-cells".
Update non-gpio property names to not have -gpio/-gpios
suffix.
Change-Id: I63fc81ce16c4e9705a08a3762aa91c7cacd174b5
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add external display dai links to sound card only when
CONFIG_AUDIO_QGKI is enabled.
Change-Id: Ic67def877cddeb08aebcfc00ab4886826905b7c2
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Compile hdmi_dlkm kernel module only when both
CONFIG_SND_SOC_MSM_HDMI_CODEC_RX and CONFIG_AUDIO_QGKI configs
are enabled.
Change-Id: I31864e8b764dbcb40e0b96ac3a98f626dab315d2
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Update speaker playback sequence on wsa883x codec to
avoid click and pop and loss of VI sense data on speaker.
Change-Id: I8ec7072b63bef6c2e7bd64c96df4d98852c4f40d
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Since clock stop mode is supported, disable mic bias supply
after a successful dmic probe.
Change-Id: I1a545969601367cc22844d1ab8467fb3722d882f
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Update sequence to enable temperature sensor in wsa883x to
read proper temperature measurement.
Change-Id: I7db16344a92b82539929511bd0de322ed086beb7
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Because of a HW limitation in DSP, while switching
RCG from TX MCLK to VA MCLK for SVA use cases
a glitch is seen on AHB bus leading to data
corruption in registers.
So, while doing a mux switch for VA RCG clock selection,
do not configure the muxsel register in HLOS as it is
taken care in DSP itself as a workaround for HW limitation.
Change-Id: Iccbe714397796259fa55f9852ece387e949b12e8
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Remove sound wire dmic device from master device list only during
critical error and not for probe defer.
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
There's some race condition when sending afe cmds between
USB playback and codec clk enablement. Add new clk_state,
clk_status and clk lock to resolve the race condition.
Change-Id: I2ccc77c20a274b797129b8b674c026ef003353d4
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Soundwire DMICs provide the same quality as regular DMICs but
the interface is soundwire. This reduces the number of pins
on the MSM. Enable soundwire DMICs on lahaina.
Change-Id: I4245369fdcb29cf96f315ebc1d2e9a83a0fbc14b
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add micbias control API to enable SWR DMICs on lahaina target.
Change-Id: I48152971e1af8dedc98ada20e4e808cf18720869
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
