Disable hdmi external audio codec.
External audio codec is not added to the codec's list
as of this change.
Change-Id: I93e7665425f83c038dff90c1ef79fa18923e3a01
Add the ICE region to be mapped during UFS probe.
This is done by vendor implementation of UFS
crypto ops.
Change-Id: I68c03bd5c011782aad4484ad192b99f097e57357
On Lahaina, 2.8v VDD supply is needed alongwith 1.8v VIO supply
to boot FM richwave chip.
As per schematics, L7E provides 2.8v supply from MSM PMIC, vote for
L7E to resolve the issue.
Change-Id: I87185b5124138134e0f5e0b25802048a54398765
The patch is a snapshot of memshare driver dt documentation
taken from msm-4.19 commit
<ea70d133e2> (Merge "ARM: dts: msm: limit gear to 3
for Lahaina").
Change-Id: Ia4030191f5d270d905ee78104ad8f5b78dfa6108
This patch adds support of RTC6226 Soc in lahaina platform
and enables se13_i2c node.
CRs-Fixed: 2624804
Change-Id: If76eb9d99a0d294cf0369948d37b5fed8fe213f2
Update PCIe0 and PCIe1 to use the correct reference for selecting
function 1 for CLKREQ on lahaina.
Change-Id: Iab9b05b1f324b02252853c0273403173b4d46e62
On Lahaina QRD device, there's different audio hardware design
with other devices. Update audio DT node for Lahaina QRD device.
Change-Id: Ic2323de99cd1bd5272a5c84c2b4e6d60d5d726e3
As the size of the lahaina-pinctrl.dtsi file is huge, it's
possible that the config nodes might be placed incorrectly
under &soc{..}, instead of &tlmm{..} due to human errors.
Hence, rearrange the node such that the lahaina-pinctrl.dtsi
file itself begin with the &tlmm block to minimize these errors.
Change-Id: I537e6cc980d58470949fc99dcaa4e65b0ff75663
Update the i2c slave address from 0x43 to 0x42, which is the
correct value on Lahaina. This change enables programming the
fsa4480 over i2c, which is needed for use cases such as
DisplayPort.
Change-Id: I530f1fcd4e8307316305af6bbf5a951315acb11a
Create new dts/dtsi files for overlay & non overlay for HSP configuration
to provide a wifi workaround. Add files for both QRD and MTP.
Change-Id: I41c47afa6c36960c3d35977b42b3111fe9e05229
This change adds GPIO configuration for USB VBUS/ID detection and
enabling 5v vbus in host mode. It adds extcon_usb2 device node for
using this configuration through USB extcon gpio driver for
notifying vbus/ID status on connecting USB cable.
Change-Id: I54727cc9112e74b4c8829442fc6e727bbd20beab
