On sudden f2fs shutdown, write pointers of zoned block devices can go
further but f2fs meta data keeps current segments at positions before the
write operations. After remounting the f2fs, this inconsistency causes
write operations not at write pointers and "Unaligned write command"
error is reported.
To avoid the error, compare current segments with write pointers of open
zones the current segments point to, during mount operation. If the write
pointer position is not aligned with the current segment position, assign
a new zone to the current segment. Also check the newly assigned zone has
write pointer at zone start. If not, reset write pointer of the zone.
Perform the consistency check during fsync recovery. Not to lose the
fsync data, do the check after fsync data gets restored and before
checkpoint commit which flushes data at current segment positions. Not to
cause conflict with kworker's dirfy data/node flush, do the fix within
SBI_POR_DOING protection.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Otherwise, it can cause circular locking dependency reported by mm.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch avoids some unnecessary locks for quota files when write_begin
fails.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Otherwise, we can hit deadlock by waiting for the locked page in
move_data_block in GC.
Thread A Thread B
- do_page_mkwrite
- f2fs_vm_page_mkwrite
- lock_page
- f2fs_balance_fs
- mutex_lock(gc_mutex)
- f2fs_gc
- do_garbage_collect
- ra_data_block
- grab_cache_page
- f2fs_balance_fs
- mutex_lock(gc_mutex)
Fixes: 39a8695824 ("f2fs: refactor ->page_mkwrite() flow")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The previous preallocation and DIO decision like below.
allow_outplace_dio !allow_outplace_dio
f2fs_force_buffered_io (*) No_Prealloc / Buffered_IO Prealloc / Buffered_IO
!f2fs_force_buffered_io No_Prealloc / DIO Prealloc / DIO
But, Javier reported Case (*) where zoned device bypassed preallocation but
fell back to buffered writes in f2fs_direct_IO(), resulting in stale data
being read.
In order to fix the issue, actually we need to preallocate blocks whenever
we fall back to buffered IO like this. No change is made in the other cases.
allow_outplace_dio !allow_outplace_dio
f2fs_force_buffered_io (*) Prealloc / Buffered_IO Prealloc / Buffered_IO
!f2fs_force_buffered_io No_Prealloc / DIO Prealloc / DIO
Reported-and-tested-by: Javier Gonzalez <javier@javigon.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Set the STATX_ATTR_VERITY bit when the statx() system call is used on a
verity file on ext4.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add a statx attribute bit STATX_ATTR_VERITY which will be set if the
file has fs-verity enabled. This is the statx() equivalent of
FS_VERITY_FL which is returned by FS_IOC_GETFLAGS.
This is useful because it allows applications to check whether a file is
a verity file without opening it. Opening a verity file can be
expensive because the fsverity_info is set up on open, which involves
parsing metadata and optionally verifying a cryptographic signature.
This is analogous to how various other bits are exposed through both
FS_IOC_GETFLAGS and statx(), e.g. the encrypt bit.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Acked-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
I had meant to replace these TODOs with the actual version when applying
the patches, but forgot to do so. Do it now.
Signed-off-by: Eric Biggers <ebiggers@google.com>
f2fs inode numbers are stable across filesystem resizing, and f2fs inode
and file logical block numbers are always 32-bit. So f2fs can always
support IV_INO_LBLK_64 encryption policies. Wire up the needed
fscrypt_operations to declare support.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
IV_INO_LBLK_64 encryption policies have special requirements from the
filesystem beyond those of the existing encryption policies:
- Inode numbers must never change, even if the filesystem is resized.
- Inode numbers must be <= 32 bits.
- File logical block numbers must be <= 32 bits.
ext4 has 32-bit inode and file logical block numbers. However,
resize2fs can re-number inodes when shrinking an ext4 filesystem.
However, typically the people who would want to use this format don't
care about filesystem shrinking. They'd be fine with a solution that
just prevents the filesystem from being shrunk.
Therefore, add a new feature flag EXT4_FEATURE_COMPAT_STABLE_INODES that
will do exactly that. Then wire up the fscrypt_operations to expose
this flag to fs/crypto/, so that it allows IV_INO_LBLK_64 policies when
this flag is set.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Inline encryption hardware compliant with the UFS v2.1 standard or with
the upcoming version of the eMMC standard has the following properties:
(1) Per I/O request, the encryption key is specified by a previously
loaded keyslot. There might be only a small number of keyslots.
(2) Per I/O request, the starting IV is specified by a 64-bit "data unit
number" (DUN). IV bits 64-127 are assumed to be 0. The hardware
automatically increments the DUN for each "data unit" of
configurable size in the request, e.g. for each filesystem block.
Property (1) makes it inefficient to use the traditional fscrypt
per-file keys. Property (2) precludes the use of the existing
DIRECT_KEY fscrypt policy flag, which needs at least 192 IV bits.
Therefore, add a new fscrypt policy flag IV_INO_LBLK_64 which causes the
encryption to modified as follows:
- The encryption keys are derived from the master key, encryption mode
number, and filesystem UUID.
- The IVs are chosen as (inode_number << 32) | file_logical_block_num.
For filenames encryption, file_logical_block_num is 0.
Since the file nonces aren't used in the key derivation, many files may
share the same encryption key. This is much more efficient on the
target hardware. Including the inode number in the IVs and mixing the
filesystem UUID into the keys ensures that data in different files is
nevertheless still encrypted differently.
Additionally, limiting the inode and block numbers to 32 bits and
placing the block number in the low bits maintains compatibility with
the 64-bit DUN convention (property (2) above).
Since this scheme assumes that inode numbers are stable (which may
preclude filesystem shrinking) and that inode and file logical block
numbers are at most 32-bit, IV_INO_LBLK_64 will only be allowed on
filesystems that meet these constraints. These are acceptable
limitations for the cases where this format would actually be used.
Note that IV_INO_LBLK_64 is an on-disk format, not an implementation.
This patch just adds support for it using the existing filesystem layer
encryption. A later patch will add support for inline encryption.
Reviewed-by: Paul Crowley <paulcrowley@google.com>
Co-developed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
The access to logged_impl_name is technically a data race, which tools
like KCSAN could complain about in the future. See:
https://github.com/google/ktsan/wiki/READ_ONCE-and-WRITE_ONCE
Fix by using xchg(), which also ensures that only one thread does the
logging.
This also required switching from bool to int, to avoid a build error on
the RISC-V architecture which doesn't implement xchg on bytes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
memset the struct fscrypt_info to zero before freeing. This isn't
really needed currently, since there's no secret key directly in the
fscrypt_info. But there's a decent chance that someone will add such a
field in the future, e.g. in order to use an API that takes a raw key
such as siphash(). So it's good to do this as a hardening measure.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Now that ext4 and f2fs implement their own post-read workflow that
supports both fscrypt and fsverity, the fscrypt-only workflow based
around struct fscrypt_ctx is no longer used. So remove the unused code.
This is based on a patch from Chandan Rajendra's "Consolidate FS read
I/O callbacks code" patchset, but rebased onto the latest kernel, folded
__fscrypt_decrypt_bio() into fscrypt_decrypt_bio(), cleaned up
fscrypt_initialize(), and updated the commit message.
Originally-from: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Instead of open-coding the calculations for ESSIV handling, use an ESSIV
skcipher which does all of this under the hood. ESSIV was added to the
crypto API in v5.4.
This is based on a patch from Ard Biesheuvel, but reworked to apply
after all the fscrypt changes that went into v5.4.
Tested with 'kvm-xfstests -c ext4,f2fs -g encrypt', including the
ciphertext verification tests for v1 and v2 encryption policies.
Originally-from: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
If BLK_DEV_ZONED isn't set, 'ret' isn't used. This makes gcc complain,
rightfully. Move ret where it is used.
Fixes: 979d54475e0b ("null_blk: cleanup null_gendisk_register")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current zone revalidation code has a major problem in that it
doesn't update the zone size and q->nr_zones atomically, leading
to a short window where an out of bounds access to the zone arrays
is possible.
To fix this move the setting of the zone size into the crticial
sections blk_revalidate_disk_zones so that it gets updated together
with the zone bitmaps and q->nr_zones. This also slightly simplifies
the caller as it deducts the zone size from the report_zones.
This change also allows to check for a power of two zone size in generic
code.
Reported-by: Hans Holmberg <hans@owltronix.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio based drivers only need to update q->nr_zones. Do that manually
instead of overloading blk_revalidate_disk_zones to keep that function
simpler for the next round of changes that will rely even more on the
request based functionality.
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use a saner size calculation, and do a trivial cleanup on the zone
revalidation to prepare to future changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For zoned=1 mode, the zone size must be a power of 2. Check this not
only when the zone size is specified during modprobe, but also when
creating a zoned null_blk device using configfs.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allocate the conventional zone bitmap and the sequential zone locking
bitmap only when we find a zone of the respective type. This avoids
wasting memory on the conventional zone bitmap for devices that only
have sequential zones, and will also prepare for other future changes.
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Invert the meaning of seq_zones_bitmap by keeping a bitmap of
conventional zones. This allows not having a bitmap for devices
that do not have conventional zones.
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify the arguments to blkdev_nr_zones by passing a gendisk instead
of the block_device and capacity. This also removes the need for
__blkdev_nr_zones as all callers are outside the fast path and can
deal with the additional branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the case of a report zones command failure, instead of simply printing
the host_byte and driver_byte values returned, print a message that is more
human readable and useful, adding sense codes too.
To do so, use the already defined sd_print_sense_hdr() and
sd_print_result() functions by moving the declaration of these functions
into sd.h.
Link: https://lore.kernel.org/r/20191125070518.951717-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/sd_zbc.c: In function 'sd_zbc_check_zones':
drivers/scsi/sd_zbc.c:341:9: warning:
variable 'buflen' set but not used [-Wunused-but-set-variable]
It is not used since commit d9dd73087a8b ("block: Enhance
blk_revalidate_disk_zones()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid the need to allocate a potentially large array of struct blk_zone
in the block layer by switching the ->report_zones method interface to
a callback model. Now the caller simply supplies a callback that is
executed on each reported zone, and private data for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need to arbitrarily limit the size of a report zone to the
number of zones defined by SD_ZBC_REPORT_MAX_ZONES. Rather, simply
calculate the report buffer size needed for the requested number of
zones without exceeding the device total number of zones. This buffer
size limitation to the hardware maximum transfer size and page mapping
capabilities is kept unchanged. Starting with this initial buffer size,
the allocation is optimized by iterating over decreasing buffer size
until the allocation succeeds (each iteration is allowed to fail fast
using the __GFP_NORETRY flag). This ensures forward progress for zone
reports and avoids failures of zones revalidation under memory pressure.
While at it, also replace the hard coded 512 B sector size with the
SECTOR_SIZE macro.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make the instance name match the method name and define the name to NULL
instead of providing an inline stub, which is rather pointless for a
method call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the pointless stub open and release methods, give the operations
vector a slightly less confusing name, and use normal alignment for the
assignment operators.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A zoned block device maintains a write pointer within a zone, and reads
beyond the write pointer are undefined. Fill data buffer returned above
the write pointer with 0xFF.
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH
support to allow explicit control of zone states.
Contains contributions from Matias Bjorling, Hans Holmberg,
Keith Busch and Damien Le Moal.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No known partitioning tool supports zoned block devices, especially the
host managed flavor with strong sequential write constraints.
Furthermore, there are also no known user nor use cases for partitioned
zoned block devices.
This patch removes partition device creation for zoned block devices,
which allows simplifying the processing of zone commands for zoned
block devices. A warning is added if a partition table is found on the
device.
For report zones operations no zone sector information remapping is
necessary anymore, simplifying the code. Of note is that remapping of
zone reports for DM targets is still necessary as done by
dm_remap_zone_report().
Similarly, remaping of a zone reset bio is not necessary anymore.
Testing for the applicability of the zone reset all request also becomes
simpler and only needs to check that the number of sectors of the
requested zone range is equal to the disk capacity.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All kernel users of blkdev_report_zones() as well as applications use
through ioctl(BLKZONEREPORT) expect to potentially get less zone
descriptors than requested. As such, the use of the internal report
zones command execution loop implemented by blk_report_zones() is
not necessary and can even be harmful to performance by causing the
execution of inefficient small zones report command to service the
reminder of a requested zone array.
This patch removes blk_report_zones(), simplifying the code. Also
remove a now incorrect comment in dm_blk_report_zones().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier Gonzalez <javier@javigon.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_revalidate_disk_zones is never called for non-zoned devices. Just
return early and warn instead of trying to handle this case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ZBC and ZAC zoned devices, the scsi driver revalidation processing
implemented by sd_revalidate_disk() includes a call to
sd_zbc_read_zones() which executes a full disk zone report used to
check that all zones of the disk are the same size. This processing is
followed by a call to blk_revalidate_disk_zones(), used to initialize
the device request queue zone bitmaps (zone type and zone write lock
bitmaps). To do so, blk_revalidate_disk_zones() also executes a full
device zone report to obtain zone types. As a result, the entire
zoned block device revalidation process includes two full device zone
report.
By moving the zone size checks into blk_revalidate_disk_zones(), this
process can be optimized to a single full device zone report, leading to
shorter device scan and revalidation times. This patch implements this
optimization, reducing the original full device zone report implemented
in sd_zbc_check_zones() to a single, small, report zones command
execution to obtain the size of the first zone of the device. Checks
whether all zones of the device are the same size as the first zone
size are moved to the generic blk_check_zone() function called from
blk_revalidate_disk_zones().
This optimization also has the following benefits:
1) fewer memory allocations in the scsi layer during disk revalidation
as the potentailly large buffer for zone report execution is not
needed.
2) Implement zone checks in a generic manner, reducing the burden on
device driver which only need to obtain the zone size and check that
this size is a power of 2 number of LBAs. Any new type of zoned
block device will benefit from this.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce three new ioctl commands BLKOPENZONE, BLKCLOSEZONE and
BLKFINISHZONE to allow applications to control the condition of zones
on a zoned block device through the execution of the REQ_OP_ZONE_OPEN,
REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH operations.
Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zoned block devices (ZBC and ZAC devices) allow an explicit control
over the condition (state) of zones. The operations allowed are:
* Open a zone: Transition to open condition to indicate that a zone will
actively be written
* Close a zone: Transition to closed condition to release the drive
resources used for writing to a zone
* Finish a zone: Transition an open or closed zone to the full
condition to prevent write operations
To enable this control for in-kernel zoned block device users, define
the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE
and REQ_OP_ZONE_FINISH as well as the generic function
blkdev_zone_mgmt() for submitting these operations on a range of zones.
This results in blkdev_reset_zones() removal and replacement with this
new zone magement function. Users of blkdev_reset_zones() (f2fs and
dm-zoned) are updated accordingly.
Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need for the function __blkdev_reset_all_zones() as
REQ_OP_ZONE_RESET_ALL can be handled directly in blkdev_reset_zones()
bio loop with an early break from the loop. This patch removes this
function and modifies blkdev_reset_zones(), simplifying the code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
REQ_OP_ZONE_RESET operations cannot be merged as these bios and requests
do not have a size and are never sequential due to the zone start sector
position required for their execution. As a result, there is no point in
using a plug around blkdev_reset_zones() bio issuing loop. This patch
removes this unnecessary plugging.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We must stop GC, once the segment becomes fully valid. Otherwise, it can
produce another dirty segments by moving valid blocks in the segment partially.
Ramon hit no free segment panic sometimes and saw this case happens when
validating reliable file pinning feature.
Signed-off-by: Ramon Pantin <pantin@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Expose in /sys/fs/f2fs/<blockdev>/main_blkaddr the block address where the
main area starts. This allows user mode programs to determine:
- That pinned files that are made exclusively of fully allocated 2MB
segments will never be unpinned by the file system.
- Where the main area starts. This is required by programs that want to
verify if a file is made exclusively of 2MB f2fs segments, the alignment
boundary for segments starts at this address. Testing for 2MB alignment
relative to the start of the device is incorrect, because for some
filesystems main_blkaddr is not at a 2MB boundary relative to the start
of the device.
The entry will be used when validating reliable pinning file feature proposed
by "f2fs: support aligned pinned file".
Signed-off-by: Ramon Pantin <pantin@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Setting softlimit larger than hardlimit seems meaningless
for disk quota but currently it is allowed. In this case,
there may be a bit of comfusion for users when they run
df comamnd to directory which has project quota.
For example, we set 20M softlimit and 10M hardlimit of
block usage limit for project quota of test_dir(project id 123).
[root@hades f2fs]# repquota -P -a
*** Report for project quotas on device /dev/nvme0n1p8
Block grace time: 7days; Inode grace time: 7days
Block limits File limits
Project used soft hard grace used soft hard grace
----------------------------------------------------------------------
0 -- 4 0 0 1 0 0
123 +- 10248 20480 10240 2 0 0
The result of df command as below:
[root@hades f2fs]# df -h /mnt/f2fs/test
Filesystem Size Used Avail Use% Mounted on
/dev/nvme0n1p8 20M 11M 10M 51% /mnt/f2fs
Even though it looks like there is another 10M free space to use,
if we write new data to diretory test(inherit project id),
the write will fail with errno(-EDQUOT).
After this patch, the df result looks like below.
[root@hades f2fs]# df -h /mnt/f2fs/test
Filesystem Size Used Avail Use% Mounted on
/dev/nvme0n1p8 10M 10M 0 100% /mnt/f2fs
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The FS got stuck in the below stack when the storage is almost
full/dirty condition (when FG_GC is being done).
schedule_timeout
io_schedule_timeout
congestion_wait
f2fs_drop_inmem_pages_all
f2fs_gc
f2fs_balance_fs
__write_node_page
f2fs_fsync_node_pages
f2fs_do_sync_file
f2fs_ioctl
The root cause for this issue is there is a potential infinite loop
in f2fs_drop_inmem_pages_all() for the case where gc_failure is true
and when there an inode whose i_gc_failures[GC_FAILURE_ATOMIC] is
not set. Fix this by keeping track of the total atomic files
currently opened and using that to exit from this condition.
Fix-suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Eric mentioned, bare printk{,_ratelimited} won't show which
filesystem instance these message is coming from, this patch tries
to show fs instance with sb->s_id field in all places we missed
before.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We expect 64-bit calculation result from below statement, however
in 32-bit machine, looped left shift operation on pgoff_t type
variable may cause overflow issue, fix it by forcing type cast.
page->index << PAGE_SHIFT;
Fixes: 26de9b1171 ("f2fs: avoid unnecessary updating inode during fsync")
Fixes: 0a2aa8fbb9 ("f2fs: refactor __exchange_data_block for speed up")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Eric reported:
RENAME_EXCHANGE support was just added to fsstress in xfstests:
commit 65dfd40a97b6bbbd2a22538977bab355c5bc0f06
Author: kaixuxia <xiakaixu1987@gmail.com>
Date: Thu Oct 31 14:41:48 2019 +0800
fsstress: add EXCHANGE renameat2 support
This is causing xfstest generic/579 to fail due to fsck.f2fs reporting errors.
I'm not sure what the problem is, but it still happens even with all the
fs-verity stuff in the test commented out, so that the test just runs fsstress.
generic/579 23s ... [10:02:25]
[ 7.745370] run fstests generic/579 at 2019-11-04 10:02:25
_check_generic_filesystem: filesystem on /dev/vdc is inconsistent
(see /results/f2fs/results-default/generic/579.full for details)
[10:02:47]
Ran: generic/579
Failures: generic/579
Failed 1 of 1 tests
Xunit report: /results/f2fs/results-default/result.xml
Here's the contents of 579.full:
_check_generic_filesystem: filesystem on /dev/vdc is inconsistent
*** fsck.f2fs output ***
[ASSERT] (__chk_dots_dentries:1378) --> Bad inode number[0x24] for '..', parent parent ino is [0xd10]
The root cause is that we forgot to update directory's i_pino during
cross_rename, fix it.
Fixes: 32f9bc25cb ("f2fs: support ->rename2()")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
