commit 50695153d7ddde3b1696dbf0085be0033bf3ddb3 upstream.
In
riocm_cdev_ioctl(RIO_CM_CHAN_SEND)
-> cm_chan_msg_send()
-> riocm_ch_send()
cm_chan_msg_send() checks that userspace didn't send too much data but
riocm_ch_send() failed to check that userspace sent sufficient data. The
result is that riocm_ch_send() can write to fields in the rio_ch_chan_hdr
which were outside the bounds of the space which cm_chan_msg_send()
allocated.
Address this by teaching riocm_ch_send() to check that the entire
rio_ch_chan_hdr was copied in from userspace.
Reported-by: maher azz <maherazz04@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit a8c22ec36c which is
commit 98fdaeb296f51ef08e727a7cc72e5b5c864c4f4d upstream.
commit 7adb96687ce8 ("x86/bugs: Make spectre user default depend on
MITIGATION_SPECTRE_V2") depends on commit 72c70f480a70 ("x86/bugs: Add
a separate config for Spectre V2"), which introduced
MITIGATION_SPECTRE_V2.
commit 72c70f480a70 ("x86/bugs: Add a separate config for Spectre V2")
never landed in stable tree, thus, stable tree doesn't have
MITIGATION_SPECTRE_V2, that said, commit 7adb96687ce8 ("x86/bugs: Make
spectre user default depend on MITIGATION_SPECTRE_V2") has no value if
the dependecy was not applied.
Revert commit 7adb96687ce8 ("x86/bugs: Make spectre user default
depend on MITIGATION_SPECTRE_V2") in stable kernel which landed in in
5.4.294, 5.10.238, 5.15.185, 6.1.141 and 6.6.93 stable versions.
Cc: David.Kaplan@amd.com
Cc: peterz@infradead.org
Cc: pawan.kumar.gupta@linux.intel.com
Cc: mingo@kernel.org
Cc: brad.spengler@opensrcsec.com
Cc: stable@vger.kernel.org # 6.6 6.1 5.15 5.10 5.4
Reported-by: Brad Spengler <brad.spengler@opensrcsec.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33bc69cf6655cf60829a803a45275f11a74899e5 ]
VFIO EEH recovery for PCI passthrough devices fails on PowerNV and pseries
platforms due to missing host-side PE bridge reconfiguration. In the
current implementation, eeh_pe_configure() only performs RTAS or OPAL-based
bridge reconfiguration for native host devices, but skips it entirely for
PEs managed through VFIO in guest passthrough scenarios.
This leads to incomplete EEH recovery when a PCI error affects a
passthrough device assigned to a QEMU/KVM guest. Although VFIO triggers the
EEH recovery flow through VFIO_EEH_PE_ENABLE ioctl, the platform-specific
bridge reconfiguration step is silently bypassed. As a result, the PE's
config space is not fully restored, causing subsequent config space access
failures or EEH freeze-on-access errors inside the guest.
This patch fixes the issue by ensuring that eeh_pe_configure() always
invokes the platform's configure_bridge() callback (e.g.,
pseries_eeh_phb_configure_bridge) even for VFIO-managed PEs. This ensures
that RTAS or OPAL calls to reconfigure the PE bridge are correctly issued
on the host side, restoring the PE's configuration space after an EEH
event.
This fix is essential for reliable EEH recovery in QEMU/KVM guests using
VFIO PCI passthrough on PowerNV and pseries systems.
Tested with:
- QEMU/KVM guest using VFIO passthrough (IBM Power9,(lpar)Power11 host)
- Injected EEH errors with pseries EEH errinjct tool on host, recovery
verified on qemu guest.
- Verified successful config space access and CAP_EXP DevCtl restoration
after recovery
Fixes: 212d16cdca ("powerpc/eeh: EEH support for VFIO PCI device")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250508062928.146043-1-nnmlinux@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4b0fa38d5fefe9aed6ed831f3bd3538c168ee19 ]
The dell_rbu driver will use memset() to clear the data held by each
packet when it is no longer needed (when the driver is unloaded, the
packet size is changed, etc).
The amount of memory that is cleared (before this patch) is the normal
packet size. However, the last packet in the list may be smaller.
Fix this to only clear the memory actually used by each packet, to prevent
it from writing past the end of data buffer.
Because the packet data buffers are allocated with __get_free_pages() (in
page-sized increments), this bug could only result in a buffer being
overwritten when a packet size larger than one page is used. The only user
of the dell_rbu module should be the Dell BIOS update program, which uses
a packet size of 4096, so no issues should be seen without the patch, it
just blocks the possiblity.
Fixes: 6c54c28e69 ("[PATCH] dell_rbu: new Dell BIOS update driver")
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-5-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e3a2bc89de44ec34153ab1c1056346b51def250 ]
It may make sense to split the Microsoft Surface hardware platform
drivers out to a separate subdirectory, since some of it may be shared
between ARM and x86 in the future (regarding devices like the Surface
Pro X).
Further, newer Surface devices will require additional platform drivers
for fundamental support (mostly regarding their embedded controller),
which may also warrant this split from a size perspective.
This commit introduces a new platform/surface subdirectory for the
Surface device family, with subsequent commits moving existing Surface
drivers over from platform/x86.
A new MAINTAINERS entry is added for this directory. Patches to files in
this directory will be taken up by the platform-drivers-x86 team (i.e.
Hans de Goede and Mark Gross) after they have been reviewed by
Maximilian Luz.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201009141128.683254-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: f4b0fa38d5fe ("platform/x86: dell_rbu: Stop overwriting data buffer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36305857b1ead8f6ca033a913162ebc09bee0b43 ]
This reverts commit 4700a00755fb5a4bb5109128297d6fd2d1272ee6.
It breaks target-module@2b300050 ("ti,sysc-omap2") probe on AM62x in a case
when minimally-configured system tries to network-boot:
[ 6.888776] probe of 2b300050.target-module returned 517 after 258 usecs
[ 17.129637] probe of 2b300050.target-module returned 517 after 708 usecs
[ 17.137397] platform 2b300050.target-module: deferred probe pending: (reason unknown)
[ 26.878471] Waiting up to 100 more seconds for network.
There are minimal configurations possible when the deferred device is not
being probed any more (because everything else has been successfully
probed) and deferral lists are not processed any more.
Stable mmc enumeration can be achieved by filling /aliases node properly
(4700a00755fb commit's rationale).
After revert:
[ 9.006816] IP-Config: Complete:
[ 9.010058] device=lan0, ...
Tested-by: Andreas Kemnade <andreas@kemnade.info> # GTA04, Panda, BT200
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250401090643.2776793-1-alexander.sverdlin@siemens.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39bb67edcc582b3b386a9ec983da67fa8a10ec03 ]
The current code around TEE_IOCTL_PARAM_SIZE() is a bit wrong on
32-bit kernels: Multiplying a user-provided 32-bit value with the
size of a structure can wrap around on such platforms.
Fix it by using saturating arithmetic for the size calculation.
This has no security consequences because, in all users of
TEE_IOCTL_PARAM_SIZE(), the subsequent kcalloc() implicitly checks
for wrapping.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Rouven Czerwinski <rouven.czerwinski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47fe74098f3dadba2f9cc1e507d813a4aa93f5f3 ]
Don't put the l4ls clk domain to sleep in case of standby.
Since CM3 PM FW[1](ti-v4.1.y) doesn't wake-up/enable the l4ls clk domain
upon wake-up, CM3 PM FW fails to wake-up the MPU.
[1] https://git.ti.com/cgit/processor-firmware/ti-amx3-cm3-pm-firmware/
Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
Tested-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250318230042.3138542-2-sbellary@baylibre.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23d060136841c58c2f9ee8c08ad945d1879ead4b ]
In case the MC firmware runs in debug mode with extensive prints pushed
to the console, the current timeout of 500ms is not enough.
Increase the timeout value so that we don't have any chance of wrongly
assuming that the firmware is not responding when it's just taking more
time.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250408105814.2837951-7-ioana.ciornei@nxp.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 325f510fcd9cda5a44bcb662b74ba4e3dabaca10 ]
We have to wait at least the minimium time for the watchdog window
(TWDMIN) before writings to the wdt register after the
watchdog is activated.
Otherwise the chip will assert TWD_ERROR and power down to reset mode.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-4-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 015bac5daca978448f2671478c553ce1f300c21e ]
When the device sends a specific input, an integer underflow can occur, leading
to MMIO write access to an invalid page.
Prevent the integer underflow by changing the type of related variables.
Signed-off-by: Kyungwook Boo <bookyungwook@gmail.com>
Link: https://lore.kernel.org/lkml/ffc91764-1142-4ba2-91b6-8c773f6f7095@gmail.com/T/
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae82eaf4aeea060bb736c3e20c0568b67c701d7d ]
The strlcat() with FORTIFY support is triggering a panic because it
thinks the target buffer will overflow although the correct target
buffer size is passed in.
Anyway, instead of memset() with 0 followed by a strlcat(), just use
memcpy() and ensure that the resulting buffer is NULL terminated.
BIOSVersion is only used for the lpfc_printf_log() which expects a
properly terminated string.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20250409-fix-lpfc-bios-str-v1-1-05dac9e51e13@kernel.org
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20c76dadc783759fd3819d289c72be590660cc8b ]
FDB entries are allocated in an atomic context as they can be added from
the data path when learning is enabled.
After converting the FDB hash table to rhashtable, the insertion rate
will be much higher (*) which will entail a much higher rate of per-CPU
allocations via dst_cache_init().
When adding a large number of entries (e.g., 256k) in a batch, a small
percentage (< 0.02%) of these per-CPU allocations will fail [1]. This
does not happen with the current code since the insertion rate is low
enough to give the per-CPU allocator a chance to asynchronously create
new chunks of per-CPU memory.
Given that:
a. Only a small percentage of these per-CPU allocations fail.
b. The scenario where this happens might not be the most realistic one.
c. The driver can work correctly without dst caches. The dst_cache_*()
APIs first check that the dst cache was properly initialized.
d. The dst caches are not always used (e.g., 'tos inherit').
It seems reasonable to not treat these allocation failures as fatal.
Therefore, do not bail when dst_cache_init() fails and suppress warnings
by specifying '__GFP_NOWARN'.
[1] percpu: allocation failed, size=40 align=8 atomic=1, atomic alloc failed, no space left
(*) 97% reduction in average latency of vxlan_fdb_update() when adding
256k entries in a batch.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-14-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 596a977b34a722c00245801a5774aa79cec4e81d ]
The ddrphy is supplied by the dpll, but due to the limited number of PLLs
on the rk3036, the dpll also is used for other periperhals, like the GPU.
So it happened, when the Lima driver turned off the gpu clock, this in
turn also disabled the dpll and thus the ram.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250503202532.992033-4-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf1b684a06170d253b47d6a5287821de976435bd ]
When processing a PREQ the code would always check whether we have a
mesh path locally and reply accordingly. However, when forwarding is
disabled then we should not reply with this information as we will not
forward data packets down that path.
Move the check for dot11MeshForwarding up in the function and skip the
mesh path lookup in that case. In the else block, set forward to false
so that the rest of the function becomes a no-op and the
dot11MeshForwarding check does not need to be duplicated.
This explains an effect observed in the Freifunk community where mesh
forwarding is disabled. In that case a mesh with three STAs and only bad
links in between them, individual STAs would occionally have indirect
mpath entries. This should not have happened.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Reviewed-by: Rouven Czerwinski <rouven@czerwinskis.de>
Link: https://patch.msgid.link/20250430191042.3287004-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b86bcfee30576b752302c55693fff97242b35dfd ]
As mlx4 has implemented skb_tx_timestamp() in mlx4_en_xmit(), the
SOFTWARE flag is surely needed when users are trying to get timestamp
information.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250510093442.79711-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57273ff8bb16f3842c2597b5bbcd49e7fa12edf7 ]
The regmap_read() function can fail, so propagate its error up to
the stack instead of silently ignoring that.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-4-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfa0ff804ffa8b1246ade8be08de98c9eb19d16f ]
The armada_37xx_gpio_direction_{in,out}put() functions can fail, so
propagate their error values back to the stack instead of silently
ignoring those.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-5-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6481c0a83367b0672951ccc876fbae7ee37b594b ]
The regmap_read() function can fail, so propagate its error up to
the stack instead of silently ignoring that.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-6-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4229c28323db141eda69cb99427be75d3edba071 ]
The regmap_update_bits() function can fail, so propagate its error
up to the stack instead of silently ignoring that.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-7-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c0829788a6e6e165846b9bedd0b908ef16260b6 ]
The statistics are incremented with raw_cpu_inc() assuming it always
happens with bottom half disabled. Without per-CPU locking in
local_bh_disable() on PREEMPT_RT this is no longer true.
Use this_cpu_inc() on PREEMPT_RT for the increment to not worry about
preemption.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-4-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd171461b90a2d2cf230943df60d580174633718 ]
tcp_rcv_state_process() must tweak tp->advmss for TS enabled flows
before the call to tcp_init_transfer() / tcp_init_buffer_space().
Otherwise tp->rcvq_space.space is off by 120 bytes
(TCP_INIT_CWND * TCPOLEN_TSTAMP_ALIGNED).
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Link: https://patch.msgid.link/20250513193919.1089692-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b879dcb1aeeca278eacaac0b1e2425b1c7599f9f ]
tcp_rcv_rtt_update() goal is to maintain an estimation of the RTT
in tp->rcv_rtt_est.rtt_us, used by tcp_rcv_space_adjust()
When TCP TS are enabled, tcp_rcv_rtt_update() is using
EWMA to smooth the samples.
Change this to immediately latch the incoming value if it
is lower than tp->rcv_rtt_est.rtt_us, so that tcp_rcv_space_adjust()
does not overshoot tp->rcvq_space.space and sk->sk_rcvbuf.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250513193919.1089692-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12889ce926e9a9baf6b83d809ba316af539b89e2 ]
This patch synchronizes code that accesses from both user-space
and IRQ contexts. The `get_stats()` function can be called from both
context.
`dev->stats.tx_errors` and `dev->stats.collisions` are also updated
in the `tx_errors()` function. Therefore, these fields must also be
protected by synchronized.
There is no code that accessses `dev->stats.tx_errors` between the
previous and updated lines, so the updating point can be moved.
Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Link: https://patch.msgid.link/20250515075333.48290-1-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af295892a7abbf05a3c2ba7abc4d81bb448623d6 ]
Function __sctp_write_space() doesn't set poll key, which leads to
ep_poll_callback() waking up all waiters, not only these waiting
for the socket being writable. Set the key properly using
wake_up_interruptible_poll(), which is preferred over the sync
variant, as writers are not woken up before at least half of the
queue is available. Also, TCP does the same.
Signed-off-by: Petr Malat <oss@malat.biz>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250516081727.1361451-1-oss@malat.biz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edb888d29748cee674006a52e544925dacc7728e ]
Logic here always sets hdr->version to 2 if it is not a BE3 or Lancer chip,
even if it is BE2. Use 'else if' to prevent multiple assignments, setting
version 0 for BE2, version 1 for BE3 and Lancer, and version 2 for others.
Fixes potential incorrect version setting when BE2_chip and
BE3_chip/lancer_chip checks could both be true.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250519141731.691136-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fe2b969d911a09abcd6a47401a3c66c38a310e6 ]
Replaced pm_runtime_put() with pm_runtime_put_sync_suspend() to ensure
the runtime suspend is invoked immediately when unregistering a slave.
This prevents a race condition where suspend was skipped when
unregistering and registering slave in quick succession.
For example, consider the rapid sequence of
`delete_device -> new_device -> delete_device -> new_device`.
In this sequence, it is observed that the dw_i2c_plat_runtime_suspend()
might not be invoked after `delete_device` operation.
This is because after `delete_device` operation, when the
pm_runtime_put() is about to trigger suspend, the following `new_device`
operation might race and cancel the suspend.
If that happens, during the `new_device` operation,
dw_i2c_plat_runtime_resume() is skipped (since there was no suspend), which
means `i_dev->init()`, i.e. i2c_dw_init_slave(), is skipped.
Since i2c_dw_init_slave() is skipped, i2c_dw_configure_fifo_slave() is
skipped too, which leaves `DW_IC_INTR_MASK` unconfigured. If we inspect
the interrupt mask register using devmem, it will show as zero.
Example shell script to reproduce the issue:
```
#!/bin/sh
SLAVE_LADDR=0x1010
SLAVE_BUS=13
NEW_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/new_device
DELETE_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/delete_device
# Create initial device
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
sleep 2
# Rapid sequence of
# delete_device -> new_device -> delete_device -> new_device
echo $SLAVE_LADDR > $DELETE_DEVICE
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
echo $SLAVE_LADDR > $DELETE_DEVICE
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
# Using devmem to inspect IC_INTR_MASK will show as zero
```
Signed-off-by: Tan En De <ende.tan@starfivetech.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20250412023303.378600-1-ende.tan@starfivetech.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 121baab7b88ed865532dadb7ef1aee6e2bea86f5 ]
If the global boost flag is enabled and policy boost flag is disabled, a
call to `cpufreq_boost_trigger_state(true)` must enable the policy's
boost state.
The current code misses that because of an optimization. Fix it.
Suggested-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/852ff11c589e6300730d207baac195b2d9d8b95f.1745511526.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d8a3179ea035f9341b6a73e5ba4029fc67e983d ]
NIOS2 uses a software-managed TLB for virtual address translation. To
flush a cache line, the original mapping is replaced by one to physical
address 0x0 with no permissions (rwx mapped to 0) set. This can lead to
TLB-permission--related traps when such a nominally flushed entry is
encountered as a mapping for an otherwise valid virtual address within a
process (e.g. due to an MMU-PID-namespace rollover that previously
flushed the complete TLB including entries of existing, running
processes).
The default ptep_set_access_flags implementation from mm/pgtable-generic.c
only forces a TLB-update when the page-table entry has changed within the
page table:
/*
* [...] We return whether the PTE actually changed, which in turn
* instructs the caller to do things like update__mmu_cache. [...]
*/
int ptep_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep,
pte_t entry, int dirty)
{
int changed = !pte_same(*ptep, entry);
if (changed) {
set_pte_at(vma->vm_mm, address, ptep, entry);
flush_tlb_fix_spurious_fault(vma, address);
}
return changed;
}
However, no cross-referencing with the TLB-state occurs, so the
flushing-induced pseudo entries that are responsible for the pagefault
in the first place are never pre-empted from TLB on this code path.
This commit fixes this behaviour by always requesting a TLB-update in
this part of the pagefault handling, fixing spurious page-faults on the
way. The handling is a straightforward port of the logic from the MIPS
architecture via an arch-specific ptep_set_access_flags function ported
from arch/mips/include/asm/pgtable.h.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Signed-off-by: Andreas Oetken <andreas.oetken@siemens-energy.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd9f6ce7d512fa21249415c16af801a4ed5d97b6 ]
In fimc_is_hw_change_mode(), the function changes camera modes without
waiting for hardware completion, risking corrupted data or system hangs
if subsequent operations proceed before the hardware is ready.
Add fimc_is_hw_wait_intmsr0_intmsd0() after mode configuration, ensuring
hardware state synchronization and stable interrupt handling.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6829c5b5d26b1be31880d74ec24cb32d2d75f1ae ]
If the HPD is low (happens if there is no EDID or the
EDID is being updated), then return -ENOLINK in
tc358743_get_detected_timings() instead of detecting video.
This avoids userspace thinking that it can start streaming when
the HPD is low.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/linux-media/20240628-stoic-bettong-of-fortitude-e25611@houat/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab9fcc6362e0699fc1150aa1d8503c40fce2c1e1 ]
When submitting MQD to CP, set SDMA_RLCx_IB_CNTL/SWITCH_INSIDE_IB bit so
it'll allow SDMA preemption if there is a massive command buffer of
long-running SDMA commands.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4a4c0ae6742ec7d6bf1548d2c6828de440814a0 ]
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8b8d7a4f1c5cdfbd61d75302fb3e3cdefb1a7ab ]
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dff41a86377563f7a2b968aae00d25b4ceb37c9 ]
stbl is s8 but it must contain offsets into slot which can go from 0 to
127.
Added a bound check for that error and return -EIO if the check fails.
Also make jfs_readdir return with error if add_missing_indices returns
with an error.
Reported-by: syzbot+b974bd41515f770c608b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com./bug?extid=b974bd41515f770c608b
Signed-off-by: Aditya Dutt <duttaditya18@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be7652c23d833d1ab2c67b16e173b1a4e69d1ae6 ]
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 683308af030cd9b8d3f1de5cbc1ee51788878feb ]
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f02f5e78ec9688e29b6857813185b1181796abe ]
When ACD feature is enabled, it triggers some internal calibrations
which result in a pretty long delay during the first HFI perf vote.
So, increase the HFI response timeout to match the downstream driver.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Patchwork: https://patchwork.freedesktop.org/patch/649344/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f397cd203f247879c2f1a061e90d4c8d23655de ]
This commit updates the dm_force_atomic_commit function to replace the
usage of PTR_ERR_OR_ZERO with IS_ERR for checking error states after
retrieving the Connector (drm_atomic_get_connector_state), CRTC
(drm_atomic_get_crtc_state), and Plane (drm_atomic_get_plane_state)
states.
The function utilized PTR_ERR_OR_ZERO for error checking. However, this
approach is inappropriate in this context because the respective
functions do not return NULL; they return pointers that encode errors.
This change ensures that error pointers are properly checked using
IS_ERR before attempting to dereference.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 531b4e2c206e5f7dead04d9da84dfa693ac57481 ]
We must be sure that the HDMI controller is powered on, while performing
the DDC transfer. Add corresponding runtime PM calls to
msm_hdmi_i2c_xfer().
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651727/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-8-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efab13e7d13a641a22c7508cde6e1a5285161944 ]
The IRQF_NO_AUTOEN can be used for the drivers that don't want
interrupts to be enabled automatically via devm_request_threaded_irq().
Using this flag can provide be more robust compared to the way of
calling disable_irq() after devm_request_threaded_irq() without the
IRQF_NO_AUTOEN flag.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-2-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ca00634c8bbb2979c73465588f486b9632f5ed5 ]
The cache_detail structure uses a "nextcheck" field to control hash table
scanning intervals. When a table scan begins, nextcheck is set to current
time plus 1800 seconds. During scanning, if cache_detail is not empty and
a cache entry's expiry time is earlier than the current nextcheck, the
nextcheck is updated to that expiry time.
This mechanism ensures that:
1) Empty cache_details are scanned every 1800 seconds to avoid unnecessary
scans
2) Non-empty cache_details are scanned based on the earliest expiry time
found
However, when adding a new cache entry to an empty cache_detail, the
nextcheck time was not being updated, remaining at 1800 seconds. This
could delay cache cleanup for up to 1800 seconds, potentially blocking
threads(such as nfsd) that are waiting for cache cleanup.
Fix this by updating the nextcheck time whenever a new cache entry is
added.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8307ebc15c1ea98a8a0b7837af1faa6c01514577 ]
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 234f71555019d308c6bc6f98c78c5551cb8cd56a ]
The ACPI specification requires that battery rate is always positive,
but the kernel ABI for POWER_SUPPLY_PROP_CURRENT_NOW
(Documentation/ABI/testing/sysfs-class-power) specifies that it should
be negative when a battery is discharging. When reporting CURRENT_NOW,
massage the value to match the documented ABI.
This only changes the sign of `current_now` and not `power_now` because
documentation doesn't describe any particular meaning for `power_now` so
leaving `power_now` unchanged is less likely to confuse userspace
unnecessarily, whereas becoming consistent with the documented ABI is
worth potentially confusing clients that read `current_now`.
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Link: https://patch.msgid.link/20250508024146.1436129-1-pmarheine@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40d3b40dce375d6f1c1dbf08d79eed3aed6c691d ]
pm_runtime_put_autosuspend() schedules a hrtimer to expire
at "dev->power.timer_expires". If the hrtimer's callback,
pm_suspend_timer_fn(), observes that the current time equals
"dev->power.timer_expires", it unexpectedly bails out instead of
proceeding with runtime suspend.
pm_suspend_timer_fn():
if (expires > 0 && expires < ktime_get_mono_fast_ns()) {
dev->power.timer_expires = 0;
rpm_suspend(..)
}
Additionally, as ->timer_expires is not cleared, all the future auto
suspend requests will not schedule hrtimer to perform auto suspend.
rpm_suspend():
if ((rpmflags & RPM_AUTO) &&...) {
if (!(dev->power.timer_expires && ...) { <-- this will fail.
hrtimer_start_range_ns(&dev->power.suspend_timer,...);
}
}
Fix this by as well checking if current time reaches the set expiration.
Co-developed-by: Patrick Daly <quic_pdaly@quicinc.com>
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Link: https://patch.msgid.link/20250515064125.1211561-1-quic_charante@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f16d9fb6cf03fdbdefa41a8b32ba1e57afb7ae3d ]
Multiple applications may access the battery gauge at the same time, so
the gauge may be busy and EBUSY will be returned. The driver will set a
flag to record the EBUSY state, and this flag will be kept until the next
periodic update. When this flag is set, bq27xxx_battery_get_property()
will just return ENODEV until the flag is updated.
Even if the gauge was busy during the last accessing attempt, returning
ENODEV is not ideal, and can cause confusion in the applications layer.
Instead, retry accessing the I2C to update the flag is as expected, for
the gauge typically recovers from busy state within a few milliseconds.
If still failed to access the gauge, the real error code would be returned
instead of ENODEV (as suggested by Pali Rohár).
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jerry Lv <Jerry.Lv@axis.com>
Link: https://lore.kernel.org/r/20250415-foo-fix-v2-1-5b45a395e4cc@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
