The calculation to find the number of fields from the maximum transmit
power count is incorrect. Fix the calculation so the correct number of
values are sent to FW.
Change-Id: I274cc12df49f9eb619ef50aaef0ce1bd85e8d667
CRs-fixed: 2894809
When processing unexpected MLM join request in STA mode,
it won't create bss peer or trigger vdev start, just post
LIM_MLM_JOIN_CNF with result code eSIR_SME_RESOURCES_UNAVAILABLE;
when handling this connection failure, vdev stop will be sent but
WLAN_VDEV_SM_EV_STOP_RESP will be discarded due to SM is
in INIT state, which leads to PE session leak and unexpected
behaviors.
To fix it, change the result code to eSIR_SME_PEER_CREATE_FAILED,
then the pe_session will be deleted and no vdev stop will be
triggered when processing connection failure.
Change-Id: I7fd860e7ce07970eafcfb31cd9b54340048d69a4
CRs-Fixed: 2894292
Macro ROAM_OFFLOAD_V1 is useless since new rso path code is
used, clean up all ROAM_OFFLOAD_V1 related code.
Change-Id: I0f6f2171a62b5c0cfb5333104be7eabc705dfef8
CRs-Fixed: 2812277
Reset RSN IE for every Connect. This RSN IE
will be overwritten with RSN IE if present.
If we don't reset then connect will use PMF
capability in RSN IE from previous connection
and will expect Deauth frame to be protected
even if connection is open.
Change-Id: I626ceb831556d17cd185a050b28d8d7a19344e68
CRs-Fixed: 2890563
Change I0e44cb1789516e1bcee619be3581d826f45f265b register
ndo_set_features API, and upper stack will invoke it during
driver loading phase, which is not expected.
Return success with debug level log printed if DSC check failure.
Change-Id: Iba35a6c3ed6394794c9be7332e0243d975ba37bd
CRs-Fixed: 2747343
If set country fails, disable the flag stating the update is in
progress. Otherwise, all subsequent requests will end up waiting for the
full timeout period.
Change-Id: Id35f49b65d5b641d9a0093204dadecc1792ee529
CRs-fixed: 2892388
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for cm/wmi roam related files.
Change-Id: Iec350f032c3e037204f560199d4a6e258ac02688
CRs-Fixed: 2810145
During system suspend, the psoc idle timer is stopped. So it may
happen that work was not scheduled and it got removed from the
workqueue. This will result into the module state as enabled after
system resume which will lead to extra power consumption.
So, to avoid this issue, start the psoc idle timer in the system
reume if all interfaces are down and module state is ENABLED.
CRs-Fixed: 2867472
Change-Id: I2151e825919b45727a279a2285293e578ce86ffa
Reduce stack frame size of lim_verify_fils_params_assoc_rsp()
by allocating dynamic memory to fils structures.
Change-Id: Ib24570d87468560f50ee1bcaad360e4729f404aa
CRs-Fixed: 2847120
With WMI_SERVICE_UNIFIED_LL_GET_STA_OVER_QMI_SUPPORT FW service
capability, the INI parameter send_ll_and_get_station_stats_over_qmi
becomes obsolete. Remove corresponding code from host driver.
Change-Id: I3fe59c5401ea13e8c6f209d2302bc1ecde449227
CRs-Fixed: 2849302
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for wma layer related files.
Change-Id: Ie4639a6f04877aa41046706118936560200162a6
CRs-Fixed: 2808064
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for hdd/sme/lim related files.
Change-Id: I9bb470cb2af0cc940f9c5dd70942eac0cdd83eb5
CRs-Fixed: 2809268
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for csr related files.
Change-Id: I6527630951ca1c291e027e7ecdb3f9bf4b0a72b3
CRs-Fixed: 2808325
Currently, for every pre CAC request a new vdev sync is getting created
and it will be destroyed only when SAP is stopped. So, there is a possible
memory leak if a valid pre CAC request is issued second time without SAP
stop.
To avoid this, don't create vdev sync for pre CAC request if pre CAC
adapter already exist.
Change-Id: If3f65648645b6801a1504a2d184dbc6928ff4771
CRs-Fixed: 2891360
Currently, the regulatory update event is created in
hdd_regulatory_init. In some cases, the country can be set before this
function, causing a crash. Move the event creation to before the country
setting logic.
Change-Id: I344d0de71f1983b3da7b47b816d6bbb0e402cbe8
CRs-fixed: 2891434
Add support for TWT AP params not in range and IE validation failed
status code.
Change-Id: I939db5388c4e7aac86484b319638a57baf83171e
CRs-Fixed: 2888847
TWT responder support should be announced, if enabled, in the
Extended capabilities IE.
Change-Id: I1355a9ddf2fe0361cb542b4c49b754d8f8a158fc
CRs-Fixed: 2884862
Currently, in TWT after posting the msg via sme to WMA
using scheduler thread. Based on the success or failure
driver set the command_in_progress so that subsequent
commands can be rejected till the current command is completed.
There is a chance, context might be broken because of this,
command_in_progress is not set.
Set the command_in_progress before posting
the msg and if there is an error then again set the
command_in_progress as NONE.
Change-Id: If9dc4bd346178d49d5d940ecf8ae008969cb1e73
CRs-Fixed: 2886135
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for file wma_scan_roam.c.
Change-Id: Ib50d49c566d9aaf124f2eecebe4b652dcbb3b5df
CRs-Fixed: 2807015
Currently, WoW wakeup host event is handled in tasklet context and
it is taking more than 800ms to execute. This is due to excessive
logging to the console from the tasklet. As a result of this, IRQs
are getting blocked during this tasklet execution.
To avoid this, add a sysfs entry to enable/disable console logging
from host wakeup event based on requirement.
Change-Id: If91a8bd5f783f358dabf9dcf46bf4c50d05d7909
CRs-Fixed: 2881972
When SSR happens, Inform the user space about teardown all TWT sessions
in P2P client mode also.
Change-Id: I190529724519a2520dfa190fcb10cafc398745a5
CRs-Fixed: 2879404
