Pull the RFR line before doing stop_rx in uart driver.
This is to prevent any rx data to come into the uart rx fifo when
stop_rx is being executed.
Remove the rx length zero check in
handling dma rx to prevent race conditions with EOT and DMA_DONE
interrupt bits.
Issue scenarios could be that during baud rate change/ runtime
suspend or any other place where stop_rx is used, there might
be a race between rx data entering uart rx fifo and availability
of dma buffers in uart driver. In this scenarios there will
be interrupt storm with rx water mark interrupt.
Change-Id: I92163c4997c1709269dce67a1d492533f710abfb
Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org>
Add snapshot of the smb358 charger as of msm-4.14
commit 790f0644f00c ("net: stmmac: Alert QTI on SDX
of host AP's SSR status"). Fix minor static analysis
tool errors.
Change-Id: I7c88f48a90cfca6c22ac4ed5289f78a32e524dc4
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
Add novatek chip id and firmware during boot up to
enable touch.
Change-Id: I382ae51c7bb4bf270c2e01b484281fcc24270062
Signed-off-by: Ravikanth Tuniki <rtunik@codeaurora.org>
Add support for UFS controller and add support for
QTI inline encryption.
Change-Id: I680c75448c0fd9b2e6c37d106075c1a39213abac
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Enable interconnect L3 driver so that consumer can vote
for L3 performance points.
Change-Id: Id0ff3e976976a05fa6ff47c7ccb9e1a3a3aed2e3
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Enable the SM8150 interconnect driver so that consumers are
able to obtain their path handles properly.
Change-Id: Ie099accf2dbfa587f23dd9f434bf04c7eca6b348
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
To improve OVP handling increase the min-offtime and dead-time
as per hardware recommendation.
Change-Id: I28040808d6c114b718aad0e0ab63554683e7746f
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Make local device pointer NULL when .remove is
invoked.
Change-Id: I5bf91367b633abf79cbc60ef5bdf93cca955902c
Signed-off-by: rbandi <rohitbandi@codeaurora.org>
Attribute pointer used while creating the common
and monitor pmu events, needs to be freed while returning
from function.
Change-Id: I7862e8ec81754102d2700cac03bb739c9bcdf32b
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
Update available freuqency output format, previously entries in the
output is separated with new line, update this format to have space
after each entry instead of new line.
Also update the available frequency node from available_freq to
available_frequencies.
Change-Id: I2b2409168713477cbc801c8837a11c5c4613e996
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
Sometimes probably crashdump timeout scenarios accessing addr_mode_cntl
registers through the host path resulting to slave timeout issue.
Hence revert this commit 'fca32c53c237("msm: kgsl: Add addr_mode_cntl
registers for legacy snapshot for holi gpu")'.
Change-Id: I771d9aecad69dd03d7e2ab771aee164c1cdfeabd
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
To prevent leakage in ship-mode toggle OVP_IGNORE_UVLO after
USB-removal and during shutdown.
Change-Id: Idb482dd63d4939be5b19594385c642a61531e662
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Correct the parameters passed to GENMASK macro
for H8_ENTER_COND_MASK.
Change-Id: If9997c7fb18d28aacce58697666c1c36a56b9a68
Signed-off-by: Bao D. Nguyen <nguyenb@codeaurora.org>
