Add configurations specific to shima platform as per
H/W and spec.
Eg: Codec data, performance configs, fuse etc.
Change-Id: I4918af58dcafba3aaafa5eeaaaec256f8cbdca37
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Update min resolution support from 128x128
to 96x96 for decoder
Change-Id: Ib6b09af6c00323b67a1f50887d80e59148e6cfd8
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
With best fit configuration, the probability of getting
a mapping for video buffer increases even when the system
is fragmented.
Change-Id: I8689447ce1341fd1189b543eb9fb6a2e03edcc94
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Encoder calculate fps based on timestamp,
if fps changes and stable for 2 frames,
set to firmware to facilitate rate control.
Use closest rounding instead of floor rounding
when calculate fps.
Change-Id: Id2420729a309378107ff6f7830515fae31512ddd
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Static - Enable latency hint which indicates that the
decode session may go into low latency mode during the
session. With this configuration, video driver disables
DCVS and decode batching.
Dynamic - Enable or disable low latency control during
the session. Based on it, video driver would decide the
work mode and set the same.
Change-Id: If6e85b7adb1bbe4b4bec9e4a8671db64f240cfe8
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
VPP delay is not applicable to Thumbnail usecase. Hence buffer
counts should not include VPP delay, in thumbnail usecase.
Change-Id: Iba7d3efec48c08c160eb602d946643d620d2a36f
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Uncomment HFI calling part for bitrate boost
setting.
Change-Id: I289b1866089fff883d624bb505b37cca4061a626
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Modify output driver min count to 4 for HEVC/H264.
Change-Id: I8efa986b693804392a6178b369ef43c7edf9e0d4
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
After grid flag enabled for HEIC, update min
input buffer count to 2.
Change-Id: Ia279b571af8c15e029a1cc77e3cbd3f6e51448f7
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Adjust the load by max image spec for concurrent
video and image sessions.
Change-Id: I433b3a4fb4436589b930a842a02033ac665a826c
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
Assign enum_fmt_out to support input port enum_fmt.
Fix encoder enum_fmt compressd flag.
Change-Id: I822ee81586fe50bfe1fbfd8a808307051e639a79
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
After couple of buffer transaction, sometimes session will be idle,
So do not consider inactive sessions for clk scaling and bus vote
calculation.
Change-Id: Ib4cc7606da6c828ce1d9108528a2cbbad4e5f6e4
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Shouldn't use count_min to validate dpb buffer count, as it
has already been modified when received seq change event.
Use dpb buffer_count_actual instead.
Change-Id: Iad4117e4d0045859312d726caae1c8801ba1b897
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
buffer counts(min_cnt, min_host, actual_cnt) is updated in
hal_buffer_requirements only for internal buffers. Currently
for dpb, we are updating only actual_cnt, due to that
msm_vidc_verify_buffer_counts check is failing. So updated
all 3 variables (min_cnt, min_host, actual) for dpb.
Change-Id: Ib6e476fae57407a2b5fb55b1b73986dfca410ae6
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
check total non_secure memory usage, reject the new
non-secure session, if total non-secure memory usage
exceeds the non-secure region size.
Change-Id: I2b0aaae061e5b022237a4c49c66e92461fb40fca
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
do not allow to open new session, if total video consumed
memory is beyond allowed memory_size_max_limit for video.
Change-Id: I6bfade01f99bae24691254744adf7ce38de51fdd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
calculate buffer size as per the max resolution
for the targets that does not support 4k and also
ensure the size is equal to YUV size by overriding
the div factor to 1.
Change-Id: Ia63676d30d1ee1e697518780a03a48010380555d
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
[1] add support for HFI_PROPERTY_PARAM_HEVC_PPS_CB_CR_OFFSET
[2] send (cb_qp_offset << 16 | cr_qp_offset) to firmware
[3] default:0 and overridden: -12
[4] firmware will subtract 12 from driver sent value.
0 maps to 12 to fw and bitstream has 0
-12 maps to 0 to fw and bitstream has -12
Change-Id: I286c7088640349691930c95e9b176e4e748c669a
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Remove usage of core 1 since there is no support of IRIS1.
Change-Id: I5588b452455b592b8156ea4f46cb8e3171e14947
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
AON register programming is used to set NOC to low
power mode during IRIS2 power off sequence. However
AON register memory map is not applicable and hence
skipping AON register programming for lagoon.
Change-Id: Ib63248d118ed9fecfa5fa87925e8f69625dc1ba8
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
a. NOC error info registers are different for IRIS2_1 pipe HW
to IRIS2 HW. FW can retrieve the same info without NOC error
info registers. Hence removing the support to print NOC
error info registers for lagoon.
b. Since IRIS2 has noc error recovery enabled and same FW is
used for IRIS2 and IRIS2_1 pipe, only printing NOC error
info registers is disabled with out disabling noc error
recovery.
Change-Id: I936629e4f53faa5e25b2a64fb92378a26499ed57
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
Initialize ubwc_stats_lock before use and destroy it before
video instance is destroyed.
Change-Id: I4ecc02109d9d1c3f8b7cfe28c49b5467866b4d3e
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
