Changes in 5.4.245
cdc_ncm: Implement the 32-bit version of NCM Transfer Block
net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize
power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize
power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier()
power: supply: bq24190: Call power_supply_changed() after updating input current
fs: fix undefined behavior in bit shift for SB_NOUSER
net/mlx5: devcom only supports 2 ports
net/mlx5: Devcom, serialize devcom registration
cdc_ncm: Fix the build warning
io_uring: always grab lock in io_cancel_async_work()
io_uring: don't drop completion lock before timer is fully initialized
io_uring: have io_kill_timeout() honor the request references
bluetooth: Add cmd validity checks at the start of hci_sock_ioctl()
binder: fix UAF caused by faulty buffer cleanup
ipv{4,6}/raw: fix output xfrm lookup wrt protocol
netfilter: ctnetlink: Support offloaded conntrack entry deletion
Linux 5.4.245
Change-Id: I25e786ed304f80b6ccb3896a8b8d2f16384f0cd6
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit 48ac727ea4.
It is not needed in Android systems, and it breaks the ABI for no real
reason, so revert it.
Bug: 161946584
Change-Id: I0ee2f63bbf65ff04dea4434438e4ece97406f7a1
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAmR14ZEACgkQONu9yGCS
aT41Mw/+NyTg/nNT37u5X7l6TeoWkJTTpxJTFM+EIL0L/LZ8d+fPwvXRuSEfUH8X
7yLBaepbuGdtyMMCmJofxlNwMrx9L9M1xK03s9DnKGxVlkFZbJth/8L2FD/R939z
7IP06/uYL/YI8ZjJSSEf6bOLqvy0BdqSLRpn9NKK9eChK0aIVQ03TIrS1NarAzuQ
lMD5CwaFqZCz8NaGfdpg01JDfMuvKdCD8dCkYE+bO9U/nQRr1dmKvHNsQMpecDte
F/YXfbcv3CIh7vwfdw8UOFzwhyZWjWHsSWi0wRK8ZGy1ckDr3lZFgYj+jr0K/CWu
mMRiEXUIphqwCb7mdi5doWyLD9ZFyU8Jx249vqWBeuL4Hb+74vqJVf1wKT0wOE8c
F6LyxXkc7lfNIIWojn4MyvxtIu4SPo/NsTd9Qxz7kj4SZHmAJNJihFIEezMUB8Wr
7VZP8o75PJ4Kx0aKkFY2IyZuC/GJa7VD+9AnCyB93eWfkufzMV/1fdOR3WEukpOg
cqRl2xRcQiRu7I1jkn09Ir6yHjR5zZ12QHT/MNZiapaXmnG/IwHGopkQKUlM3Cwz
rbAg7gLb89mjHbbFq8TO1W7JIelLuejAk/P8tO1Uf9VEa/c0E0I7Q434posf0/Yk
XJdV2V+meOG6qyGkW35yUgentd5+bcSxyaA9D1IarA0EC11UFjU=
=hQuZ
-----END PGP SIGNATURE-----
Merge 5.4.244 into android11-5.4-lts
Changes in 5.4.244
driver core: add a helper to setup both the of_node and fwnode of a device
drm/mipi-dsi: Set the fwnode for mipi_dsi_device
ARM: 9296/1: HP Jornada 7XX: fix kernel-doc warnings
linux/dim: Do nothing if no time delta between samples
net: Fix load-tearing on sk->sk_stamp in sock_recv_cmsgs().
netfilter: conntrack: fix possible bug_on with enable_hooks=1
netlink: annotate accesses to nlk->cb_running
net: annotate sk->sk_err write from do_recvmmsg()
net: tap: check vlan with eth_type_vlan() method
net: add vlan_get_protocol_and_depth() helper
ipvlan:Fix out-of-bounds caused by unclear skb->cb
net: datagram: fix data-races in datagram_poll()
af_unix: Fix a data race of sk->sk_receive_queue->qlen.
af_unix: Fix data races around sk->sk_shutdown.
fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode()
drm/amd/display: Use DC_LOG_DC in the trasform pixel function
regmap: cache: Return error in cache sync operations for REGCACHE_NONE
memstick: r592: Fix UAF bug in r592_remove due to race condition
firmware: arm_sdei: Fix sleep from invalid context BUG
ACPI: EC: Fix oops when removing custom query handlers
drm/tegra: Avoid potential 32-bit integer overflow
ACPICA: Avoid undefined behavior: applying zero offset to null pointer
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex
ext2: Check block size validity during mount
scsi: lpfc: Prevent lpfc_debugfs_lockstat_write() buffer overflow
net: pasemi: Fix return type of pasemi_mac_start_tx()
net: Catch invalid index in XPS mapping
scsi: target: iscsit: Free cmds before session free
lib: cpu_rmap: Avoid use after free on rmap->obj array entries
scsi: message: mptlan: Fix use after free bug in mptlan_remove() due to race condition
gfs2: Fix inode height consistency check
ext4: set goal start correctly in ext4_mb_normalize_request
ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()
f2fs: fix to drop all dirty pages during umount() if cp_error is set
samples/bpf: Fix fout leak in hbm's run_bpf_prog
wifi: iwlwifi: pcie: fix possible NULL pointer dereference
wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_buf
wifi: iwlwifi: dvm: Fix memcpy: detected field-spanning write backtrace
Bluetooth: L2CAP: fix "bad unlock balance" in l2cap_disconnect_rsp
staging: rtl8192e: Replace macro RTL_PCI_DEVICE with PCI_DEVICE
HID: logitech-hidpp: Don't use the USB serial for USB devices
HID: logitech-hidpp: Reconcile USB and Unifying serials
spi: spi-imx: fix MX51_ECSPI_* macros when cs > 3
HID: wacom: generic: Set battery quirk only when we see battery data
usb: typec: tcpm: fix multiple times discover svids error
serial: 8250: Reinit port->pm on port specific driver unbind
mcb-pci: Reallocate memory region to avoid memory overlapping
sched: Fix KCSAN noinstr violation
recordmcount: Fix memory leaks in the uwrite function
RDMA/core: Fix multiple -Warray-bounds warnings
clk: tegra20: fix gcc-7 constant overflow warning
iommu/arm-smmu-v3: Acknowledge pri/event queue overflow if any
Input: xpad - add constants for GIP interface numbers
phy: st: miphy28lp: use _poll_timeout functions for waits
mfd: dln2: Fix memory leak in dln2_probe()
btrfs: replace calls to btrfs_find_free_ino with btrfs_find_free_objectid
btrfs: fix space cache inconsistency after error loading it from disk
ASoC: fsl_micfil: register platform component before registering cpu dai
cpupower: Make TSC read per CPU for Mperf monitor
af_key: Reject optional tunnel/BEET mode templates in outbound policies
net: fec: Better handle pm_runtime_get() failing in .remove()
ALSA: firewire-digi00x: prevent potential use after free
vsock: avoid to close connected socket after the timeout
serial: arc_uart: fix of_iomap leak in `arc_serial_probe`
ip6_gre: Fix skb_under_panic in __gre6_xmit()
ip6_gre: Make o_seqno start from 0 in native mode
ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode
erspan: get the proto with the md version for collect_md
net: hns3: fix sending pfc frames after reset issue
net: hns3: fix reset delay time to avoid configuration timeout
media: netup_unidvb: fix use-after-free at del_timer()
drm/exynos: fix g2d_open/close helper function definitions
net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment()
net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
net: bcmgenet: Restore phy_stop() depending upon suspend/close
wifi: iwlwifi: mvm: don't trust firmware n_channels
cassini: Fix a memory leak in the error handling path of cas_init_one()
igb: fix bit_shift to be in [1..8] range
vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()
USB: usbtmc: Fix direction for 0-length ioctl control messages
usb-storage: fix deadlock when a scsi command timeouts more than once
USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value
usb: dwc3: debugfs: Resume dwc3 before accessing registers
usb: typec: altmodes/displayport: fix pin_assignment_show
ALSA: hda: Fix Oops by 9.1 surround channel names
ALSA: hda: Add NVIDIA codec IDs a3 through a7 to patch table
ALSA: hda/realtek: Add a quirk for HP EliteDesk 805
ALSA: hda/realtek: Add quirk for 2nd ASUS GU603
can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flag
can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop()
can: kvaser_pciefd: Call request_irq() before enabling interrupts
can: kvaser_pciefd: Empty SRB buffer in probe
can: kvaser_pciefd: Clear listen-only bit if not explicitly requested
can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt
can: kvaser_pciefd: Disable interrupts in probe error path
KVM: x86: do not report a vCPU as preempted outside instruction boundaries
statfs: enforce statfs[64] structure initialization
serial: Add support for Advantech PCI-1611U card
ceph: force updating the msg pointer in non-split case
tpm/tpm_tis: Disable interrupts for more Lenovo devices
powerpc/64s/radix: Fix soft dirty tracking
nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()
netfilter: nftables: add nft_parse_register_load() and use it
netfilter: nftables: add nft_parse_register_store() and use it
netfilter: nftables: statify nft_parse_register()
netfilter: nf_tables: validate registers coming from userspace.
netfilter: nf_tables: add nft_setelem_parse_key()
netfilter: nf_tables: allow up to 64 bytes in the set element data area
netfilter: nf_tables: stricter validation of element data
netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag
netfilter: nf_tables: hold mutex on netns pre_exit path
HID: wacom: Force pen out of prox if no events have been received in a while
HID: wacom: Add new Intuos Pro Small (PTH-460) device IDs
HID: wacom: add three styli to wacom_intuos_get_tool_type
lib/string_helpers: Introduce string_upper() and string_lower() helpers
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_ether: Fix host MAC address case
vc_screen: rewrite vcs_size to accept vc, not inode
vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
s390/qdio: get rid of register asm
s390/qdio: fix do_sqbs() inline assembly constraint
watchdog: sp5100_tco: Immediately trigger upon starting.
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
mt76: mt7615: Fix build with older compilers
ALSA: hda/ca0132: add quirk for EVGA X299 DARK
ALSA: hda/realtek: Enable headset onLenovo M70/M90
m68k: Move signal frame following exception on 68020/030
parisc: Handle kgdb breakpoints only in kernel context
parisc: Allow to reboot machine after system halt
gpio: mockup: Fix mode of debugfs files
btrfs: use nofs when cleaning up aborted transactions
x86/mm: Avoid incomplete Global INVLPG flushes
selftests/memfd: Fix unknown type name build failure
parisc: Fix flush_dcache_page() for usage from irq context
x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms
debugobjects: Don't wake up kswapd from fill_pool()
fbdev: udlfb: Fix endpoint check
net: fix stack overflow when LRO is disabled for virtual interfaces
udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().
USB: core: Add routines for endpoint checks in old drivers
USB: sisusbvga: Add endpoint checks
media: radio-shark: Add endpoint checks
net: fix skb leak in __skb_tstamp_tx()
selftests: fib_tests: mute cleanup error message
bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields
ipv6: Fix out-of-bounds access in ipv6_find_tlv()
power: supply: leds: Fix blink to LED on transition
power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition
power: supply: bq27xxx: Fix I2C IRQ race on remove
power: supply: bq27xxx: Fix poll_interval handling and races on remove
power: supply: sbs-charger: Fix INHIBITED bit for Status reg
coresight: Fix signedness bug in tmc_etr_buf_insert_barrier_packet()
xen/pvcalls-back: fix double frees with pvcalls_new_active_socket()
x86/show_trace_log_lvl: Ensure stack pointer is aligned, again
ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg
forcedeth: Fix an error handling path in nv_probe()
net/mlx5: Fix error message when failing to allocate device memory
net/mlx5: Devcom, fix error flow in mlx5_devcom_register_device
3c589_cs: Fix an error handling path in tc589_probe()
Linux 5.4.244
Change-Id: I056fbc6363372dca786e64c8b6649768e49ee2ed
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit 35a2681e99 which is
commit 8d87ae48ced2dffd5e7247d19eb4c88be6f1c6f1 upstream.
It is not needed in Android systems, and it breaks the ABI for no real
reason, so revert it.
Bug: 161946584
Change-Id: I50c760760dad7e4fbbec88814d66b36445928771
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit e4e88f74eb which is
commit afb0367a80553e795e7ad055299096544454f3f6 upstream.
It is not needed in Android systems, and it breaks the ABI for no real
reason, so revert it.
Bug: 161946584
Change-Id: I94b151ecbd6df12ad4996bce68ac447545640183
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit 30ac77e995 which is
commit f19c3c2959e465209ade1a7a699e6cbf4359ce78 upstream.
It is not needed in Android systems, and it breaks the ABI for no real
reason, so revert it.
Bug: 161946584
Change-Id: I96195afffc4e2bb06d16b6489548b4b475b6599c
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit e1431faa89 which is
commit 31088f6f7906253ef4577f6a9b84e2d42447dba0 upstream.
It breaks the CRC generation of loads of symbols, and is not needed at
all for any real Android issue at this point in time, so revert it to
preserve the ABI.
Bug: 161946584
Change-Id: I93095fb07b431a194e21bb21d4cd22435445dca3
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-----BEGIN PGP SIGNATURE-----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=SrzM
-----END PGP SIGNATURE-----
Merge 5.4.243 into android11-5.4-lts
Changes in 5.4.243
counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies()
drm/fb-helper: set x/yres_virtual in drm_fb_helper_check_var
bluetooth: Perform careful capability checks in hci_sock_ioctl()
USB: serial: option: add UNISOC vendor and TOZED LT70C product
iio: adc: palmas_gpadc: fix NULL dereference on rmmod
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750
asm-generic/io.h: suppress endianness warnings for readq() and writeq()
USB: dwc3: fix runtime pm imbalance on probe errors
USB: dwc3: fix runtime pm imbalance on unbind
perf sched: Cast PTHREAD_STACK_MIN to int as it may turn into sysconf(__SC_THREAD_STACK_MIN_VALUE)
staging: iio: resolver: ads1210: fix config mode
debugfs: regset32: Add Runtime PM support
xhci: fix debugfs register accesses while suspended
MIPS: fw: Allow firmware to pass a empty env
ipmi:ssif: Add send_retries increment
ipmi: fix SSIF not responding under certain cond.
kheaders: Use array declaration instead of char
pwm: meson: Fix axg ao mux parents
pwm: meson: Fix g12a ao clk81 name
ring-buffer: Sync IRQ works before buffer destruction
reiserfs: Add security prefix to xattr name in reiserfs_security_write()
KVM: nVMX: Emulate NOPs in L2, and PAUSE if it's not intercepted
i2c: omap: Fix standard mode false ACK readings
Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"
ubifs: Fix memleak when insert_old_idx() failed
ubi: Fix return value overwrite issue in try_write_vid_and_data()
ubifs: Free memory for tmpfile name
selinux: fix Makefile dependencies of flask.h
selinux: ensure av_permissions.h is built when needed
tpm, tpm_tis: Do not skip reset of original interrupt vector
erofs: stop parsing non-compact HEAD index if clusterofs is invalid
erofs: fix potential overflow calculating xattr_isize
drm/rockchip: Drop unbalanced obj unref
drm/vgem: add missing mutex_destroy
drm/probe-helper: Cancel previous job before starting new one
arm64: dts: renesas: r8a77990: Remove bogus voltages from OPP table
arm64: dts: renesas: r8a774c0: Remove bogus voltages from OPP table
EDAC/skx: Fix overflows on the DRAM row address mapping arrays
ARM: dts: qcom: ipq4019: Fix the PCI I/O port range
ARM: dts: qcom: ipq8064: reduce pci IO size to 64K
ARM: dts: qcom: ipq8064: Fix the PCI I/O port range
media: bdisp: Add missing check for create_workqueue
media: uapi: add MEDIA_BUS_FMT_METADATA_FIXED media bus format.
media: av7110: prevent underflow in write_ts_to_decoder()
firmware: qcom_scm: Clear download bit during reboot
drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}
drm/msm/adreno: Defer enabling runpm until hw_init()
drm/msm/adreno: drop bogus pm_runtime_set_active()
mmc: sdhci-of-esdhc: fix quirk to ignore command inhibit for data
drm/lima/lima_drv: Add missing unwind goto in lima_pdev_probe()
regulator: core: Consistently set mutex_owner when using ww_mutex_lock_slow()
regulator: core: Avoid lockdep reports when resolving supplies
x86/apic: Fix atomic update of offset in reserve_eilvt_offset()
media: dm1105: Fix use after free bug in dm1105_remove due to race condition
media: saa7134: fix use after free bug in saa7134_finidev due to race condition
media: rcar_fdp1: simplify error check logic at fdp_open()
media: rcar_fdp1: fix pm_runtime_get_sync() usage count
media: rcar_fdp1: Make use of the helper function devm_platform_ioremap_resource()
media: rcar_fdp1: Fix the correct variable assignments
media: rcar_fdp1: Fix refcount leak in probe and remove function
media: rc: gpio-ir-recv: Fix support for wake-up
regulator: stm32-pwr: fix of_iomap leak
x86/ioapic: Don't return 0 from arch_dynirq_lower_bound()
arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step
debugobject: Prevent init race with static objects
timekeeping: Split jiffies seqlock
tick/sched: Use tick_next_period for lockless quick check
tick/sched: Reduce seqcount held scope in tick_do_update_jiffies64()
tick/sched: Optimize tick_do_update_jiffies64() further
tick: Get rid of tick_period
tick/common: Align tick period with the HZ tick.
wifi: ath6kl: minor fix for allocation size
wifi: ath9k: hif_usb: fix memory leak of remain_skbs
wifi: ath5k: fix an off by one check in ath5k_eeprom_read_freq_list()
wifi: ath6kl: reduce WARN to dev_dbg() in callback
tools: bpftool: Remove invalid \' json escape
wifi: rtw88: mac: Return the original error from rtw_pwr_seq_parser()
wifi: rtw88: mac: Return the original error from rtw_mac_power_switch()
scm: fix MSG_CTRUNC setting condition for SO_PASSSEC
vlan: partially enable SIOCSHWTSTAMP in container
net/packet: annotate accesses to po->xmit
net/packet: convert po->origdev to an atomic flag
net/packet: convert po->auxdata to an atomic flag
scsi: target: iscsit: Fix TAS handling during conn cleanup
scsi: megaraid: Fix mega_cmd_done() CMDID_INT_CMDS
f2fs: handle dqget error in f2fs_transfer_project_quota()
rtlwifi: Start changing RT_TRACE into rtl_dbg
rtlwifi: Replace RT_TRACE with rtl_dbg
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg()
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg()
bpftool: Fix bug for long instructions in program CFG dumps
crypto: drbg - make drbg_prepare_hrng() handle jent instantiation errors
crypto: drbg - Only fail when jent is unavailable in FIPS mode
scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup()
bpf, sockmap: fix deadlocks in the sockhash and sockmap
nvme: handle the persistent internal error AER
nvme: fix async event trace event
nvme-fcloop: fix "inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage"
bpf, sockmap: Revert buggy deadlock fix in the sockhash and sockmap
md/raid10: fix leak of 'r10bio->remaining' for recovery
md/raid10: fix memleak for 'conf->bio_split'
md: update the optimal I/O size on reshape
md/raid10: fix memleak of md thread
wifi: iwlwifi: make the loop for card preparation effective
wifi: iwlwifi: mvm: check firmware response size
ixgbe: Allow flow hash to be set via ethtool
ixgbe: Enable setting RSS table to default values
bpf: Don't EFAULT for getsockopt with optval=NULL
netfilter: nf_tables: don't write table validation state without mutex
ipv4: Fix potential uninit variable access bug in __ip_make_skb()
Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work"
netlink: Use copy_to_user() for optval in netlink_getsockopt().
net: amd: Fix link leak when verifying config failed
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
pstore: Revert pmsg_lock back to a normal mutex
usb: host: xhci-rcar: remove leftover quirk handling
fpga: bridge: fix kernel-doc parameter description
iio: light: max44009: add missing OF device matching
usb: gadget: udc: renesas_usb3: Fix use after free bug in renesas_usb3_remove due to race condition
PCI: imx6: Install the fault handler only on compatible match
genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()
ASoC: es8316: Use IRQF_NO_AUTOEN when requesting the IRQ
ASoC: es8316: Handle optional IRQ assignment
linux/vt_buffer.h: allow either builtin or modular for macros
spi: qup: Don't skip cleanup in remove's error path
spi: fsl-spi: Fix CPM/QE mode Litte Endian
vmci_host: fix a race condition in vmci_host_poll() causing GPF
of: Fix modalias string generation
ia64: mm/contig: fix section mismatch warning/error
ia64: salinfo: placate defined-but-not-used warning
scripts/gdb: bail early if there are no clocks
PM: domains: Fix up terminology with parent/child
scripts/gdb: bail early if there are no generic PD
mtd: spi-nor: cadence-quadspi: Make driver independent of flash geometry
mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode
mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure
mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel
spi: cadence-quadspi: fix suspend-resume implementations
uapi/linux/const.h: prefer ISO-friendly __typeof__
sh: sq: Fix incorrect element size for allocating bitmap buffer
usb: chipidea: fix missing goto in `ci_hdrc_probe`
usb: mtu3: fix kernel panic at qmu transfer done irq handler
firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe
tty: serial: fsl_lpuart: adjust buffer length to the intended size
serial: 8250: Add missing wakeup event reporting
staging: rtl8192e: Fix W_DISABLE# does not work after stop/start
spmi: Add a check for remove callback when removing a SPMI driver
macintosh/windfarm_smu_sat: Add missing of_node_put()
powerpc/mpc512x: fix resource printk format warning
powerpc/wii: fix resource printk format warnings
powerpc/sysdev/tsi108: fix resource printk format warnings
macintosh: via-pmu-led: requires ATA to be set
powerpc/rtas: use memmove for potentially overlapping buffer copy
perf/core: Fix hardlockup failure caused by perf throttle
RDMA/siw: Fix potential page_array out of range access
RDMA/rdmavt: Delete unnecessary NULL check
rtc: omap: include header for omap_rtc_power_off_program prototype
RDMA/mlx4: Prevent shift wrapping in set_user_sq_size()
rtc: meson-vrtc: Use ktime_get_real_ts64() to get the current time
power: supply: generic-adc-battery: fix unit scaling
clk: add missing of_node_put() in "assigned-clocks" property parsing
RDMA/siw: Remove namespace check from siw_netdev_event()
IB/hfi1: Fix SDMA mmu_rb_node not being evicted in LRU order
NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease
firmware: raspberrypi: Keep count of all consumers
firmware: raspberrypi: Introduce devm_rpi_firmware_get()
input: raspberrypi-ts: Release firmware handle when not needed
Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe
SUNRPC: remove the maximum number of retries in call_bind_status
RDMA/mlx5: Use correct device num_ports when modify DC
clocksource/drivers/davinci: Avoid trailing '\n' hidden in pr_fmt()
clocksource: davinci: axe a pointless __GFP_NOFAIL
clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails
openrisc: Properly store r31 to pt_regs on unhandled exceptions
ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline
leds: TI_LMU_COMMON: select REGMAP instead of depending on it
dmaengine: mv_xor_v2: Fix an error code.
pwm: mtk-disp: Don't check the return code of pwmchip_remove()
pwm: mtk-disp: Adjust the clocks to avoid them mismatch
pwm: mtk-disp: Disable shadow registers before setting backlight values
phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port
dmaengine: dw-edma: Fix to change for continuous transfer
dmaengine: dw-edma: Fix to enable to issue dma request on DMA processing
dmaengine: at_xdmac: do not enable all cyclic channels
afs: Fix updating of i_size with dv jump from server
parisc: Fix argument pointer in real64_call_asm()
nilfs2: do not write dirty data after degenerating to read-only
nilfs2: fix infinite loop in nilfs_mdt_get_block()
md/raid10: fix null-ptr-deref in raid10_sync_request
mailbox: zynqmp: Fix IPI isr handling
mailbox: zynqmp: Fix typo in IPI documentation
wifi: rtl8xxxu: RTL8192EU always needs full init
clk: rockchip: rk3399: allow clk_cifout to force clk_cifout_src to reparent
scripts/gdb: fix lx-timerlist for Python3
btrfs: scrub: reject unsupported scrub flags
s390/dasd: fix hanging blockdevice after request requeue
dm clone: call kmem_cache_destroy() in dm_clone_init() error path
dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path
dm flakey: fix a crash with invalid table line
dm ioctl: fix nested locking in table_clear() to remove deadlock concern
perf auxtrace: Fix address filter entire kernel size
perf intel-pt: Fix CYC timestamps after standalone CBR
debugobject: Ensure pool refill (again)
netfilter: nf_tables: deactivate anonymous set from preparation phase
nohz: Add TICK_DEP_BIT_RCU
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
mailbox: zynq: Switch to flexible array to simplify code
mailbox: zynqmp: Fix counts of child nodes
dm verity: skip redundant verity_handle_err() on I/O errors
dm verity: fix error handling for check_at_most_once on FEC
crypto: inside-secure - irq balance
crypto: safexcel - Cleanup ring IRQ workqueues on load failure
kernel/relay.c: fix read_pos error when multiple readers
relayfs: fix out-of-bounds access in relay_file_read
net/ncsi: clear Tx enable mode when handling a Config required AEN
net/sched: cls_api: remove block_cb from driver_list before freeing
sit: update dev->needed_headroom in ipip6_tunnel_bind_dev()
net: dsa: mv88e6xxx: add mv88e6321 rsvd2cpu
writeback: fix call of incorrect macro
net/sched: act_mirred: Add carrier check
rxrpc: Fix hard call timeout units
ionic: remove noise from ethtool rxnfc error msg
af_packet: Don't send zero-byte data in packet_sendmsg_spkt().
drm/amdgpu: add a missing lock for AMDGPU_SCHED
ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init`
net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
virtio_net: split free_unused_bufs()
virtio_net: suppress cpu stall when free_unused_bufs
perf vendor events power9: Remove UTF-8 characters from JSON files
perf map: Delete two variable initialisations before null pointer checks in sort__sym_from_cmp()
perf symbols: Fix return incorrect build_id size in elf_read_build_id()
btrfs: fix btrfs_prev_leaf() to not return the same key twice
btrfs: don't free qgroup space unless specified
btrfs: print-tree: parent bytenr must be aligned to sector size
cifs: fix pcchunk length type in smb2_copychunk_range
platform/x86: touchscreen_dmi: Add info for the Dexp Ursus KX210i
inotify: Avoid reporting event with invalid wd
sh: math-emu: fix macro redefined warning
sh: init: use OF_EARLY_FLATTREE for early init
sh: nmi_debug: fix return value of __setup handler
remoteproc: stm32: Call of_node_put() on iteration error
remoteproc: st: Call of_node_put() on iteration error
ARM: dts: exynos: fix WM8960 clock name in Itop Elite
ARM: dts: s5pv210: correct MIPI CSIS clock name
f2fs: fix potential corruption when moving a directory
drm/panel: otm8009a: Set backlight parent to panel device
drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras
drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend
HID: wacom: Set a default resolution for older tablets
HID: wacom: insert timestamp to packed Bluetooth (BT) events
ext4: fix WARNING in mb_find_extent
ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum
ext4: fix data races when using cached status extents
ext4: improve error recovery code paths in __ext4_remount()
ext4: fix deadlock when converting an inline directory in nojournal mode
ext4: add bounds checking in get_max_inline_xattr_value_size()
ext4: bail out of ext4_xattr_ibody_get() fails for any reason
ext4: remove a BUG_ON in ext4_mb_release_group_pa()
ext4: fix invalid free tracking in ext4_xattr_move_to_block()
tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH
serial: 8250: Fix serial8250_tx_empty() race with DMA Tx
drbd: correctly submit flush bio on barrier
PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock
printk: declare printk_deferred_{enter,safe}() in include/linux/printk.h
PM: domains: Restore comment indentation for generic_pm_domain.child_links
drm/msm: Fix double pm_runtime_disable() call
firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()
drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()
drm/exynos: move to use request_irq by IRQF_NO_AUTOEN flag
mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock
drm/amd/display: Fix hang when skipping modeset
Linux 5.4.243
Change-Id: I103e06e639a82ddc7ca60ffed98c898946b81542
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 9b7c68b3911aef84afa4cbfc31bce20f10570d51 upstream.
Currently, offloaded conntrack entries (flows) can only be deleted
after they are removed from offload, which is either by timeout,
tcp state change or tc ct rule deletion. This can cause issues for
users wishing to manually delete or flush existing entries.
Support deletion of offloaded conntrack entries.
Example usage:
# Delete all offloaded (and non offloaded) conntrack entries
# whose source address is 1.2.3.4
$ conntrack -D -s 1.2.3.4
# Delete all entries
$ conntrack -F
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Cc: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3632679d9e4f879f49949bb5b050e0de553e4739 upstream.
With a raw socket bound to IPPROTO_RAW (ie with hdrincl enabled), the
protocol field of the flow structure, build by raw_sendmsg() /
rawv6_sendmsg()), is set to IPPROTO_RAW. This breaks the ipsec policy
lookup when some policies are defined with a protocol in the selector.
For ipv6, the sin6_port field from 'struct sockaddr_in6' could be used to
specify the protocol. Just accept all values for IPPROTO_RAW socket.
For ipv4, the sin_port field of 'struct sockaddr_in' could not be used
without breaking backward compatibility (the value of this field was never
checked). Let's add a new kind of control message, so that the userland
could specify which protocol is used.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20230522120820.1319391-1-nicolas.dichtel@6wind.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdc1c5fac982845a58d28690cdb56db8c88a530d upstream.
In binder_transaction_buffer_release() the 'failed_at' offset indicates
the number of objects to clean up. However, this function was changed by
commit 44d8047f1d ("binder: use standard functions to allocate fds"),
to release all the objects in the buffer when 'failed_at' is zero.
This introduced an issue when a transaction buffer is released without
any objects having been processed so far. In this case, 'failed_at' is
indeed zero yet it is misinterpreted as releasing the entire buffer.
This leads to use-after-free errors where nodes are incorrectly freed
and subsequently accessed. Such is the case in the following KASAN
report:
==================================================================
BUG: KASAN: slab-use-after-free in binder_thread_read+0xc40/0x1f30
Read of size 8 at addr ffff4faf037cfc58 by task poc/474
CPU: 6 PID: 474 Comm: poc Not tainted 6.3.0-12570-g7df047b3f0aa #5
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x48/0x60
print_report+0xf8/0x5b8
kasan_report+0xb8/0xfc
__asan_load8+0x9c/0xb8
binder_thread_read+0xc40/0x1f30
binder_ioctl+0xd9c/0x1768
__arm64_sys_ioctl+0xd4/0x118
invoke_syscall+0x60/0x188
[...]
Allocated by task 474:
kasan_save_stack+0x3c/0x64
kasan_set_track+0x2c/0x40
kasan_save_alloc_info+0x24/0x34
__kasan_kmalloc+0xb8/0xbc
kmalloc_trace+0x48/0x5c
binder_new_node+0x3c/0x3a4
binder_transaction+0x2b58/0x36f0
binder_thread_write+0x8e0/0x1b78
binder_ioctl+0x14a0/0x1768
__arm64_sys_ioctl+0xd4/0x118
invoke_syscall+0x60/0x188
[...]
Freed by task 475:
kasan_save_stack+0x3c/0x64
kasan_set_track+0x2c/0x40
kasan_save_free_info+0x38/0x5c
__kasan_slab_free+0xe8/0x154
__kmem_cache_free+0x128/0x2bc
kfree+0x58/0x70
binder_dec_node_tmpref+0x178/0x1fc
binder_transaction_buffer_release+0x430/0x628
binder_transaction+0x1954/0x36f0
binder_thread_write+0x8e0/0x1b78
binder_ioctl+0x14a0/0x1768
__arm64_sys_ioctl+0xd4/0x118
invoke_syscall+0x60/0x188
[...]
==================================================================
In order to avoid these issues, let's always calculate the intended
'failed_at' offset beforehand. This is renamed and wrapped in a helper
function to make it clear and convenient.
Fixes: 32e9f56a96d8 ("binder: don't detect sender/target during buffer cleanup")
Reported-by: Zi Fan Tan <zifantan@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20230505203020.4101154-1-cmllamas@google.com
[cmllamas: resolve trivial conflict due to missing commit 9864bb4801331]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 000c2fa2c144c499c881a101819cf1936a1f7cf2 upstream.
Previously, channel open messages were always sent to monitors on the first
ioctl() call for unbound HCI sockets, even if the command and arguments
were completely invalid. This can leave an exploitable hole with the abuse
of invalid ioctl calls.
This commit hardens the ioctl processing logic by first checking if the
command is valid, and immediately returning with an ENOIOCTLCMD error code
if it is not. This ensures that ioctl calls with invalid commands are free
of side effects, and increases the difficulty of further exploitation by
forcing exploitation to find a way to pass a valid command first.
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Dragos-Marian Panait <dragos.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No upstream commit exists for this patch.
Don't free the request unconditionally, if the request is issued async
then someone else may be holding a submit reference to it.
Reported-and-tested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No upstream commit exists for this patch.
If we drop the lock right after adding it to the timeout list, then
someone attempting to kill timeouts will find it in an indeterminate
state. That means that cancelation could attempt to cancel and remove
a timeout, and then io_timeout() proceeds to init and add the timer
afterwards.
Ensure the timeout request is fully setup before we drop the
completion lock, which guards cancelation as well.
Reported-and-tested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No upstream commit exists for this patch.
It's not necessarily safe to check the task_list locklessly, remove
this micro optimization and always grab task_lock before deeming it
empty.
Reported-and-tested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5d0ab06b63fc9c727a7bb72c81321c0114be540b ]
The ndp32->wLength is two bytes long, so replace cpu_to_le32 with cpu_to_le16.
Fixes: 0fa81b304a79 ("cdc_ncm: Implement the 32-bit version of NCM Transfer Block")
Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f893f57a3bf9fe1f4bcb25b55aea7f7f9712fe7 ]
From one hand, mlx5 driver is allowing to probe PFs in parallel.
From the other hand, devcom, which is a share resource between PFs, is
registered without any lock. This might resulted in memory problems.
Hence, use the global mlx5_dev_list_lock in order to serialize devcom
registration.
Fixes: fadd59fc50 ("net/mlx5: Introduce inter-device communication mechanism")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a6e75e5f57e9ac82268d9bfca3403598d9d0292 ]
Devcom API is intended to be used between 2 devices only add this
implied assumption into the code and check when it's no true.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: 1f893f57a3bf ("net/mlx5: Devcom, serialize devcom registration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f15afbd34d8fadbd375f1212e97837e32bc170cc ]
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. It was spotted by UBSAN.
So let's just fix this by using the BIT() helper for all SB_* flags.
Fixes: e462ec50cb ("VFS: Differentiate mount flags (MS_*) from internal superblock flags")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Message-Id: <20230424051835.374204-1-gehao@kylinos.cn>
[brauner@kernel.org: use BIT() for all SB_* flags]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77c2a3097d7029441e8a91aa0de1b4e5464593da ]
The bq24192 model relies on external charger-type detection and once
that is done the bq24190_charger code will update the input current.
In this case, when the initial power_supply_changed() call is made
from the interrupt handler, the input settings are 5V/0.5A which
on many devices is not enough power to charge (while the device is on).
On many devices the fuel-gauge relies in its external_power_changed
callback to timely signal userspace about charging <-> discharging
status changes. Add a power_supply_changed() call after updating
the input current. This allows the fuel-gauge driver to timely recheck
if the battery is charging after the new input current has been applied
and then it can immediately notify userspace about this.
Fixes: 18f8e6f695 ("power: supply: bq24190_charger: Get input_current_limit from our supplier")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2220af8ca61ae67de4ec3deec1c6395a2f65b9fd ]
Some (USB) charger ICs have variants with USB D+ and D- pins to do their
own builtin charger-type detection, like e.g. the bq24190 and bq25890 and
also variants which lack this functionality, e.g. the bq24192 and bq25892.
In case the charger-type; and thus the input-current-limit detection is
done outside the charger IC then we need some way to communicate this to
the charger IC. In the past extcon was used for this, but if the external
detection does e.g. full USB PD negotiation then the extcon cable-types do
not convey enough information.
For these setups it was decided to model the external charging "brick"
and the parameters negotiated with it as a power_supply class-device
itself; and power_supply_set_input_current_limit_from_supplier() was
introduced to allow drivers to get the input-current-limit this way.
But in some cases psy drivers may want to know other properties, e.g. the
bq25892 can do "quick-charge" negotiation by pulsing its current draw,
but this should only be done if the usb_type psy-property of its supplier
is set to DCP (and device-properties indicate the board allows higher
voltages).
Instead of adding extra helper functions for each property which
a psy-driver wants to query from its supplier, refactor
power_supply_set_input_current_limit_from_supplier() into a
more generic power_supply_get_property_from_supplier() function.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of: 77c2a3097d70 ("power: supply: bq24190: Call power_supply_changed() after updating input current")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59a99cd462fbdf71f4e845e09f37783035088b4f ]
bq27xxx_external_power_changed() gets called when the charger is plugged
in or out. Rather then immediately scheduling an update wait 0.5 seconds
for things to stabilize, so that e.g. the (dis)charge current is stable
when bq27xxx_battery_update() runs.
Fixes: 740b755a3b ("bq27x00: Poll battery state")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e01c7f7046efc2c7c192c3619db43292b98e997 ]
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than
the calculated "min" value, but greater than zero, the logic sets
tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in
cdc_ncm_fill_tx_frame() where all the data is handled.
For small values of dwNtbOutMaxSize the memory allocated during
alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to
how size is aligned at alloc time:
size = SKB_DATA_ALIGN(size);
size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
Thus we hit the same bug that we tried to squash with
commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")
Low values of dwNtbOutMaxSize do not cause an issue presently because at
alloc_skb() time more memory (512b) is allocated than required for the
SKB headers alone (320b), leaving some space (512b - 320b = 192b)
for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:113!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic net/core/skbuff.c:113 [inline]
RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118
[snip]
Call Trace:
<TASK>
skb_put+0x151/0x210 net/core/skbuff.c:2047
skb_put_zero include/linux/skbuff.h:2422 [inline]
cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline]
cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308
cdc_ncm_tx_fixup+0xa3/0x100
Deal with too low values of dwNtbOutMaxSize, clamp it in the range
[USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure
enough data space is allocated to handle CDC data by making sure
dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE.
Fixes: 289507d336 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning")
Cc: stable@vger.kernel.org
Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d
Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230517133808.1873695-2-tudor.ambarus@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fa81b304a7973a499f844176ca031109487dd31 ]
The NCM specification defines two formats of transfer blocks: with 16-bit
fields (NTB-16) and with 32-bit fields (NTB-32). Currently only NTB-16 is
implemented.
This patch adds the support of NTB-32. The motivation behind this is that
some devices such as E5785 or E5885 from the current generation of Huawei
LTE routers do not support NTB-16. The previous generations of Huawei
devices are also use NTB-32 by default.
Also this patch enables NTB-32 by default for Huawei devices.
During the 2019 ValdikSS made five attempts to contact Huawei to add the
NTB-16 support to their router firmware, but they were unsuccessful.
Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 7e01c7f7046e ("net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 640bf95b2c7c2981fb471acdafbd3e0458f8390d upstream.
Should tc589_config() fail, some resources need to be released as already
done in the remove function.
Fixes: 15b99ac172 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/d8593ae867b24c79063646e36f9b18b0790107cb.1684575975.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af87194352cad882d787d06fb7efa714acd95427 upstream.
In case devcom allocation is failed, mlx5 is always freeing the priv.
However, this priv might have been allocated by a different thread,
and freeing it might lead to use-after-free bugs.
Fix it by freeing the priv only in case it was allocated by the
running thread.
Fixes: fadd59fc50 ("net/mlx5: Introduce inter-device communication mechanism")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b17a4971d3b2a073f4078dd65331efbe35baa2d upstream.
If an error occures after calling nv_mgmt_acquire_sema(), it should be
undone with a corresponding nv_mgmt_release_sema() call.
Add it in the error handling path of the probe as already done in the
remove function.
Fixes: cac1c52c36 ("forcedeth: mgmt unit interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95109657471311601b98e71f03d0244f48dc61bb upstream.
Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is
reserved for 'C7_1' instead.
Fixes: 04afbbbb1c ("ASoC: Intel: Skylake: Update the topology interface structure")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e4be0d011f21593c6b316806779ba1eba2cd7e0 upstream.
The commit e335bb51cc ("x86/unwind: Ensure stack pointer is aligned")
tried to align the stack pointer in show_trace_log_lvl(), otherwise the
"stack < stack_info.end" check can't guarantee that the last read does
not go past the end of the stack.
However, we have the same problem with the initial value of the stack
pointer, it can also be unaligned. So without this patch this trivial
kernel module
#include <linux/module.h>
static int init(void)
{
asm volatile("sub $0x4,%rsp");
dump_stack();
asm volatile("add $0x4,%rsp");
return -EAGAIN;
}
module_init(init);
MODULE_LICENSE("GPL");
crashes the kernel.
Fixes: e335bb51cc ("x86/unwind: Ensure stack pointer is aligned")
Signed-off-by: Vernon Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20230512104232.GA10227@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fafac202d18230bb9926bda48e563fd2cce2a4f upstream.
In the pvcalls_new_active_socket() function, most error paths call
pvcalls_back_release_active(fedata->dev, fedata, map) which calls
sock_release() on "sock". The bug is that the caller also frees sock.
Fix this by making every error path in pvcalls_new_active_socket()
release the sock, and don't free it in the caller.
Fixes: 5db4d286a8 ("xen/pvcalls: implement connect command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/e5f98dc2-0305-491f-a860-71bbd1398a2f@kili.mountain
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f67bc15e526bb9920683ad6c1891ff9e08981335 upstream.
This code generates a Smatch warning:
drivers/hwtracing/coresight/coresight-tmc-etr.c:947 tmc_etr_buf_insert_barrier_packet()
error: uninitialized symbol 'bufp'.
The problem is that if tmc_sg_table_get_data() returns -EINVAL, then
when we test if "len < CORESIGHT_BARRIER_PKT_SIZE", the negative "len"
value is type promoted to a high unsigned long value which is greater
than CORESIGHT_BARRIER_PKT_SIZE. Fix this bug by adding an explicit
check for error codes.
Fixes: 75f4e3619f ("coresight: tmc-etr: Add transparent buffer management")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/7d33e244-d8b9-4c27-9653-883a13534b01@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2f2a3c9800208b0db2c2e34b05323757117faa2 upstream.
CHARGE_INHIBITED bit position of the ChargerStatus register is actually
0 not 1. This patch corrects it.
Fixes: feb583e37f ("power: supply: add sbs-charger driver")
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c00bc80462afc7963f449d7f21d896d2f629cacc upstream.
Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0
to avoid bq27xxx_battery_update() requeuing the delayed_work item.
There are 2 problems with this:
1. If the driver is unbound through sysfs, rather then the module being
rmmod-ed, this changes poll_interval unexpectedly
2. This is racy, after it being set poll_interval could be changed
before bq27xxx_battery_update() checks it through
/sys/module/bq27xxx_battery/parameters/poll_interval
Fix this by added a removed attribute to struct bq27xxx_device_info and
using that instead of setting poll_interval to 0.
There also is another poll_interval related race on remove(), writing
/sys/module/bq27xxx_battery/parameters/poll_interval will requeue
the delayed_work item for all devices on the bq27xxx_battery_devices
list and the device being removed was only removed from that list
after cancelling the delayed_work item.
Fix this by moving the removal from the bq27xxx_battery_devices list
to before cancelling the delayed_work item.
Fixes: 8cfaaa8118 ("bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 444ff00734f3878cd54ddd1ed5e2e6dbea9326d5 upstream.
devm_request_threaded_irq() requested IRQs are only free-ed after
the driver's remove function has ran. So the IRQ could trigger and
call bq27xxx_battery_update() after bq27xxx_battery_teardown() has
already run.
Switch to explicitly free-ing the IRQ in bq27xxx_battery_i2c_remove()
to fix this.
Fixes: 8807feb91b ("power: bq27xxx_battery: Add interrupt handling support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c34c0aef185dcd10881847b9ebf20046aa77cb4 upstream.
bq27xxx_battery_update() assumes / requires that it is only run once,
not multiple times at the same time. But there are 3 possible callers:
1. bq27xxx_battery_poll() delayed_work item handler
2. bq27xxx_battery_irq_handler_thread() I2C IRQ handler
3. bq27xxx_battery_setup()
And there is no protection against these racing with each other,
fix this race condition by making all callers take di->lock:
- Rename bq27xxx_battery_update() to bq27xxx_battery_update_unlocked()
- Add new bq27xxx_battery_update() which takes di->lock and then calls
bq27xxx_battery_update_unlocked()
- Make stale cache check code in bq27xxx_battery_get_property(), which
already takes di->lock directly to check the jiffies, call
bq27xxx_battery_update_unlocked() instead of messing with
the delayed_work item
- Make bq27xxx_battery_update_unlocked() mod the delayed-work item
so that the next poll is delayed to poll_interval milliseconds after
the last update independent of the source of the update
Fixes: 740b755a3b ("bq27x00: Poll battery state")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4484643991e0f6b89060092563f0dbab9450cbb upstream.
When a battery's status changes from charging to full then
the charging-blink-full-solid trigger tries to change
the LED from blinking to solid/on.
As is documented in include/linux/leds.h to deactivate blinking /
to make the LED solid a LED_OFF must be send:
"""
* Deactivate blinking again when the brightness is set to LED_OFF
* via the brightness_set() callback.
"""
led_set_brighness() calls with a brightness value other then 0 / LED_OFF
merely change the brightness of the LED in its on state while it is
blinking.
So power_supply_update_bat_leds() must first send a LED_OFF event
before the LED_FULL to disable blinking.
Fixes: 6501f728c5 ("power_supply: Add new LED trigger charging-blink-solid-full")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 878ecb0897f4737a4c9401f3523fd49589025671 upstream.
optlen is fetched without checking whether there is more than one byte to parse.
It can lead to out-of-bounds access.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: c61a404325 ("[IPV6]: Find option offset by type.")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0613d8ca9ab382caabe9ed2dceb429e9781e443f upstream.
A narrow load from a 64-bit context field results in a 64-bit load
followed potentially by a 64-bit right-shift and then a bitwise AND
operation to extract the relevant data.
In the case of a 32-bit access, an immediate mask of 0xffffffff is used
to construct a 64-bit BPP_AND operation which then sign-extends the mask
value and effectively acts as a glorified no-op. For example:
0: 61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
results in the following code generation for a 64-bit field:
ldr x7, [x7] // 64-bit load
mov x10, #0xffffffffffffffff
and x7, x7, x10
Fix the mask generation so that narrow loads always perform a 32-bit AND
operation:
ldr x7, [x7] // 64-bit load
mov w10, #0xffffffff
and w7, w7, w10
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Krzesimir Nowak <krzesimir@kinvolk.io>
Cc: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Fixes: 31fd85816d ("bpf: permits narrower load from bpf program context fields")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230518102528.1341-1-will@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d226b1df361988f885c298737d6019c863a25f26 upstream.
In the end of the test, there will be an error message induced by the
`ip netns del ns1` command in cleanup()
Tests passed: 201
Tests failed: 0
Cannot remove namespace file "/run/netns/ns1": No such file or directory
This can even be reproduced with just `./fib_tests.sh -h` as we're
calling cleanup() on exit.
Redirect the error message to /dev/null to mute it.
V2: Update commit message and fixes tag.
V3: resubmit due to missing netdev ML in V2
Fixes: b60417a9f2b8 ("selftest: fib_tests: Always cleanup before exit")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a02fb71d7192ff1a9a47c9d937624966c6e09af upstream.
Commit 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with
TX timestamp.") added a call to skb_orphan_frags_rx() to fix leaks with
zerocopy skbs. But it ended up adding a leak of its own. When
skb_orphan_frags_rx() fails, the function just returns, leaking the skb
it just cloned. Free it before returning.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Fixes: 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.")
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230522153020.32422-1-ptyadav@amazon.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13890626501ffda22b18213ddaf7930473da5792 upstream.
Many of the older USB drivers in the Linux USB stack were written
based simply on a vendor's device specification. They use the
endpoint information in the spec and assume these endpoints will
always be present, with the properties listed, in any device matching
the given vendor and product IDs.
While that may have been true back then, with spoofing and fuzzing it
is not true any more. More and more we are finding that those old
drivers need to perform at least a minimum of checking before they try
to use any endpoint other than ep0.
To make this checking as simple as possible, we now add a couple of
utility routines to the USB core. usb_check_bulk_endpoints() and
usb_check_int_endpoints() take an interface pointer together with a
list of endpoint addresses (numbers and directions). They check that
the interface's current alternate setting includes endpoints with
those addresses and that each of these endpoints has the right type:
bulk or interrupt, respectively.
Although we already have usb_find_common_endpoints() and related
routines meant for a similar purpose, they are not well suited for
this kind of checking. Those routines find endpoints of various
kinds, but only one (either the first or the last) of each kind, and
they don't verify that the endpoints' addresses agree with what the
caller expects.
In theory the new routines could be more general: They could take a
particular altsetting as their argument instead of always using the
interface's current altsetting. In practice I think this won't matter
too much; multiple altsettings tend to be used for transferring media
(audio or visual) over isochronous endpoints, not bulk or interrupt.
Drivers for such devices will generally require more sophisticated
checking than these simplistic routines provide.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae9b15fbe63447bc1d3bba3769f409d17ca6fdf6 upstream.
When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.
team0
|
+------+------+-----+-----+
| | | | |
team1 team2 team3 ... team200
If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.
But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.
Reproducer:
ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
ip link add team$i master team0 type team
ethtool -K team$i lro on
done
ethtool -K team0 lro off
In order to fix it, the notifier_ctx member of bonding/team is introduced.
Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com
Fixes: fd867d51f8 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
