Copy qca_cld3_wlan.ko.unstripped to out symbols folder during build time.
This will save significant time to fetch the unstripped during Kernel panic analysis
by avoiding repo Sync and rebuilding the image on which issue happened.
Change-Id: I1fc720560e0f74178Montana0ef604413e5b553dbd2f
Reviewed-on: https://gerrit.mot.com/1119046
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Prashanth Chakravarthy <a19110@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1456501
Submit-Approved: Raja Phani K <a16821@motorola.com>
For the concurrency mode sta+sap , we need 2 mac addresses
DUT is generating only 1 mac address based on serial number
added the code to generate the remaining mac addresses
Change-Id: I6d2880f746656d332ace67417edb29ad8b97b44a
Reviewed-on: https://gerrit.mot.com/1481319
Reviewed-by: Prashanth Chakravarthy <a19110@motorola.com>
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Moving this log as debug logs by Motorola as
Qualcomm need to support multiple configuration.
Change-Id: Ic7dbfe906b844d23f159e73d2795159158e4dbcc
Reviewed-on: https://gerrit.mot.com/1469662
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Prashanth Chakravarthy <a19110@motorola.com>
Submit-Approved: Jira Key
Since we use wrqu structure to pass data from
qsap, use copy_from_user function to avoid
data corruption.
Change-Id: Ic5f4f8631246c932432fc2317829534b521ec438
Reviewed-on: https://gerrit.mot.com/1456951
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Prashanth Chakravarthy <a19110@motorola.com>
Submit-Approved: Raja Phani K <a16821@motorola.com>
Propogate (CR) : get correct tx power from ioctl.
Restructured based on the 8250 files
Change-Id: I2216a0442cbb8dbb7fd9a1fcbbed5be9bec177ac
Reviewed-on: https://gerrit.mot.com/1456950
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Prashanth Chakravarthy <a19110@motorola.com>
Submit-Approved: Raja Phani K <a16821@motorola.com>
The ioctl handling needs to be differentiated between
calls made by Mot code and iwpriv code since they
fill in different parameters.
Change-Id: If5276c14e20f87c88123c8d3c68849ac8f4e6173
Reviewed-on: https://gerrit.mot.com/1456948
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Prashanth Chakravarthy <a19110@motorola.com>
Tested-by: Jira Key
Submit-Approved: Raja Phani K <a16821@motorola.com>
Ioctls value was being filled up with wrq data structure in
softap sdk, but extra parameter was being read from driver.
Fix to read the wrq data structure in driver
Change-Id: I06d8be4e3665bad937614fcb579c36f5f1159e10
Reviewed-on: https://gerrit.mot.com/1456947
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Prashanth Chakravarthy <a19110@motorola.com>
Submit-Approved: Raja Phani K <a16821@motorola.com>
iwpriv tool uses extra parameter whereas Mot
ioctl uses wrqu data structure. Need to differentiate
between the two to resolve panic
Change-Id: Icb1c9e4f75ad1f89f43ff2be5fc7f551f3176851
Reviewed-on: https://gerrit.mot.com/1456946
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Prashanth Chakravarthy <a19110@motorola.com>
Submit-Approved: Raja Phani K <a16821@motorola.com>
Create sar_mhs and sar_sta sysfs entries for recording wlan states
for SAR cutback. The WLAN driver does not care about these entries
but they are needed as IPC over to the mdmcutback daemon.
Change-Id: I277f7c68e3b74557edb6ff82fa0224d1f470fd95
Reviewed-on: https://gerrit.mot.com/1264155
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Binesh Balasingh <binesh@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1456500
Reviewed-by: Prashanth Chakravarthy <a19110@motorola.com>
Submit-Approved: Raja Phani K <a16821@motorola.com>
In WLAN driver for Helium family, QC has updated hdd_context_t
structure and removed intfMacAddr variable. As a result,
with Motorola MAC address changes, compilation was failing.
Replaced intfMacAddr with new provisioned and derived variables
to read and use MAC address from UTAG properly.
Updated the MOT OUI with latest MOT OUI values.
Change-Id: I78e942aefc5b802e6297402c796d5d002b6d955a
Reviewed-on: https://gerrit.mot.com/1196122
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Prashanth Chakravarthy <a19110@motorola.com>
Submit-Approved: Yun Ma <yunma@motorola.com>
- Read MAC Address from UTAG
- Generate new MAC address from serial number, if UTAG
is not programmed with MAC addresses in Factory.
Port changes from (CR) to new Helium platform(sm6150).
Change-Id: If6d2e532907ff0cd267262710b3c694bf73c9129
Reviewed-on: https://gerrit.mot.com/1257719
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Bin Liu <liubin7@motorola.com>
Submit-Approved: Jira Key
Changes based on new TLV2 format to support 12M wlan radiated
power test on Production SW.
Change-Id: I90e2dfe8d2828f054cb5f540d51e3ef71d5112a5
Reviewed-on: https://gerrit.mot.com/983481
SLTApproved: Slta Waiver <sltawvr@motorola.com>
SME-Granted: SME Approvals Granted
Reviewed-by: Santhosh Kumar Gillella <santhoshg@motorola.com>
Tested-by: Jira Key <jirakey@motorola.com>
Submit-Approved: Jira Key <jirakey@motorola.com>
SAP is allowed to come up on SCC with a STA operating
in 6 GHz only if the STA is on a PSC channel in VLP mode.
Therefore, filter out all 6 GHz channels from the PCL if
the STA operates on any non-VLP mode. Also, in case of
VLP mode, filter out non-PSC channels.
Change-Id: I37d9a510db3647fc07858af99eb614ebe824cc78
CRs-Fixed: 3206471
If user configure to not use 40 MHz in 2.4 GHz, then avoid setting
40 MHz capability and use cb mode as
WNI_CFG_CHANNEL_BONDING_MODE_DISABLE for 2.4 GHz.
Change-Id: I4e9153e211e02f6b959e16dad4573c2b490cb215
CRs-Fixed: 3584510
When send assoc req frame, if the length for extended capabilities
IE is zero, but present field is non-zero, it will cause assoc req
frame malformed issue.
Fix is to set present field value to zero when the length for
extended capabilities IE is zero.
Change-Id: Ie8826e6cfb1fc3a44ee52115ad4482e040f2c38a
CRs-Fixed: 3085943
The 6GHz HE capability macros were backported from kernel version 5.8
into 5.4, so change the check for kernel version to simply check for
the macro definition itself.
Change-Id: I86a9dfa964356ba65bd21ffef802042d442356bc
CRs-fixed: 2960286
New checks have been added in userspace to verify the 6GHz HE
capabilities before allowing the connection. These capabilities
are not currently being shared by host. Add logic to send the
6GHz HE capabilities to userspace.
Also, add APIs to get capabilities from MLME component.
Change-Id: I3d2bbe0d87be6094b6fc74ce01d0e418873cbc6f
CRs-fixed: 2931130
User may set the ini param g_sta_sap_scc_on_lte_coex_chan=1 if SAP
is allowed to come up on unsafe channels. Currently, this doesn't
cover the below case,
1. SAP is enabled on a 5 GHz channel in a non-DBS platform
2. Concurrent STA enabled and connected it to an AP that's in
unsafe channel.
3. SAP doesn't move to the STA channel though the ini to enable
force SCC(gWlanMccToSccSwitchMode) is set and it's a non-DBS
platform as the target channel(STA channel) is unsafe channel.
Allow SAP to move to unsafe STA channel if the ini
g_sta_sap_scc_on_lte_coex_chan is set to true.
Change-Id: I3e2b8ae57e843a938e4799f473da87664dbabb85
CRs-Fixed: 3609503
Add sanity check for index with NUM_CHANNELS and pcl_sz
when add 2.4 GHz channel list.
Change-Id: I04ac1bcdb6720a4740be7c2f5e08f76b3c34d8c4
CRs-Fixed: 3025000
Skip the FISA aggregation and drop the frame if the reo destination
indication is zero in the packet TLVs.
Change-Id: I9bd02652bf321202f6b59e6da98fc6959ab93413
CRs-Fixed: 3426355
In populate_dot_11_f_ext_chann_switch_ann API, will read current country
code from mac context which is not have the updated country code.
So, read the current country code directly from regulatory API,
wlan_reg_read_current_country.
Remove unused variables mac->scan.countryCodeCurrent,
mac_ptr->scan.countryCodeDefault and tagCsr11dinfo->countryCode.
Change-Id: Ice64ef1be5b775125ff3bcacfcab7684c6833cad
CRs-Fixed: 3529808
For STA+SAP/GO concurrency support from GUI, In case if
START/STOP AP/GO request comes just before the SAE
authentication completion on STA, SAE AUTH REQ waits for
START/STOP AP RSP and START/STOP AP RSP waits to complete
SAE AUTH REQ.
Driver completes START/STOP AP RSP only upon SAE AUTH REQ
timeout(5 sec) as start/stop ap will be in serialization
pending queue, and SAE auth sequence cannot complete as
hostap thread is blocked in start/stop ap cfg80211 ops.
To avoid above deadlock until SAE timeout, abort the SAE
connection immediately and complete START/STOP AP/GO asap
so that the upper layer can trigger a fresh connection
after START/STOP AP/GO completion.
Change-Id: I96de1bb27dfc669ccf920a90cf86a3cb54e68354
CRs-Fixed: 3452943
The AP adds OMN IE in the assoc response, and changes
its operating channel width during association. The
STA must move to this new channel width and update it
to the firmware during peer assoc. Since, the STA
doesn't update the channel width properly, it leads
to retries in the higher bandwidth where the AP is
not currently operating.
The VHT channel width calculation in the host driver
is not equipped to handle the new VHT OP IE definition.
Differentiate the VHT operating channel width field in
the VHTOP IE based on the ccf1.
Change-Id: Ibc3dc91ecc091a307244e3e1359dfe9e4520f277
CRs-Fixed: 3205020
Due to limitation uCode always filling SGI as long in
rx_msdu_start_tlv.
This change is to update SGI for VHT Rx data packet which is
extracted from WMI_VDEV_SMART_MONITOR_EVENTID.
Change-Id: I5fcdc463ea2a6d83253e39cc377a2471aeb4e133
CRs-Fixed: 3459106
Currently for QCA_NL80211_VENDOR_SUBCMD_USABLE_CHANNELS vendor
command STA interface should be UP and running. During STA/SAP
concurrency when STA is disabled SAP cannot get the usable channels
from driver since STA iface is brought down by Wifi HAL.
These changes remove interface running dependency for get usable
channels vendor command.
Change-Id: I3760adda2ce258f428f2b803112ab25503e97b60
CRs-Fixed: 3517894
Currently, data rate for management tx packets is filled only as
1 or 6 Mbps which is wrong.
Sniffer expect data rate multiple of 2. Hence fill the data rate with
multiple of 2 for tx management packets which received from firmware
and converting into mbps.
Change-Id: I5dd6515804cd3751925af0992a30a7441ebf9bbb
CRs-Fixed: 3444177
When roaming has started and connect request from userspace
is received, disconnect is initiated as part of the connect
request and RSO stop->RSO Deinit is sent to firmware. But
before receiving the RSO stop, firmware posted the Roam Synch
indication to the host driver. While droping the roam
synch indication, the driver does abort roaming and as part of
that RSO state is changed to RSO enabled in connecting state.
Change the RSO state to RSO enabled only if roaming or roam synch
indication processing is in progress.
Change-Id: I7869d1a559884480708b9d1a493296a443364f0b
CRs-Fixed: 3089165
Hw mode change in progress is set after the set_hw_mode
command is queued in serialization. Its not reset in below
cases:
Active command timeout case, serialization command
cancelled case.
Before connect request is queued, if hw mode change is in
progress, there is 6 secs wait and if there is no hw mode
change response, connection failure. This causes subsequent
connection failures and there is no recovery.
Reset the wait for hw mode change event in serialization
command failure cases.
Change-Id: I716982f06198e9c3495685ddb158044778c4b1ff
CRs-Fixed: 3256424
In SAP due to intrabss forwarding, Tx ring update is going through
when WOW enable command has been sent to FW. This results in crash.
To fix this, set is_tx_pause flag when suspend sequence starts,
which will pause Tx ring HP update.
Change-Id: I81f25b8bfca917c95180c460fd932c0f75094c10
CRs-Fixed: 3295428
