This reverts commit 7d3ecfd796.
This change had caused a regression with swr-haptics driver probe
as the soundwire master couldn't enumerate swr haptics. Revert
this until we can understand why soundwire enumeration fails.
Change-Id: Ie5840247013a1a3fab15758e9ace7b131619be49
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Downstream arm-smmu impl, perform SYNC as part of unmap().
This is done under arm_smmu_tlb_inv_context_s1. This double the sync
operation. This impacts the unmap time, remove this duplicate sync
operation.
Change-Id: Ic98fc04a8102fe3a0b79e52b33daabf94732fcbf
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
This reverts commit fc44c0ba38 ("msm_rtb: Don't lose
the __user tag on relaxed reads/writes"). This causes
address parameter, with side effects, to be evaluated
more than once.
Change-Id: Ib37665763736bdf562afcc8335b014a2724a7598
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Add CLK_DONT_HOLD_STATE flag to avoid the framework from
placing a proxy vote to enable the clocks during probe since
these GPU clocks are failing to turn on as their corresponding
GDSC is not enabled yet.
Change-Id: I4771d1c5696a069d0d67d407de3a7a5b1f5b139e
Signed-off-by: Jagadeesh Kona <jkona@codeaurora.org>
Enable SMB5 and QG drivers which control the main charger and
Qgauge peripherals present on PM7250b.
Change-Id: I66925cdbefd160d09f221734d5b9f676f822fe8d
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Add support for "bms" power supply which is not present in kernel 5.4
through IIO device and properties under it through individual IIO
channels under the IIO device.
Change-Id: I55c44e5db2dc4549021cb429444c7c5afa679c3a
Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
SMB5 charger drivers and their helper files use several power supply
properties on msm-4.19 which cannot be supported on msm-5.4 due to the
need for GKI compliance. Add support for main charger to register
as an IIO device with individual channels under it corresponding to
missing power supply properties from msm-4.19.
Change-Id: I7182160258fa2ebd4af36b0531b11d988cffdbd3
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
sdxlemur will have at most 1GB of DDR, so allow all of it to be
mapped as lowmem instead of enabling CONFIG_HIGHMEM.
Change-Id: I89148d18e0be0c1d99795b7f49184bb5421af0f1
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
When force FW assert, it should use RDDM timer instead of FW
boot timer since it expects FW entering RDDM mode.
Change-Id: Ic8498b0f3c23dc494267571da7f627eace9f91bd
Signed-off-by: Yue Ma <yuem@codeaurora.org>
When serial driver is present in second stage ramdisk, it takes ~5 sec to
init the UART. All the data bufferred till then will have to be put onto
the console taking a console lock and this causes a watchdog bark. To
avoid this watchdog issue, disable the console. This also disables early
console.
Change-Id: Ibded81922cb735e3035fc960258213c4de1d6a74
Signed-off-by: Prakruthi Deepak Heragu <pheragu@codeaurora.org>
MMRM interface is used to do admission control of
specific resources (eg: clock) of multimedia clients
(camera/display/video/cvp).
Change-Id: Ife92d31ab08c80c06467771e74d05ab1a9a8a54b
Signed-off-by: Shivendra Kakrania <shiven@codeaurora.org>
SVM going to rely on kernel autosleep feature to do suspend-to-RAM.
Enable required configurations to achieve suspend-to-RAM functionality.
Change-Id: Ie31abce7927c8b6b2ce5dad6f917f96c52e90803
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Configure dbl and msgq interrupts as wakeup capable to wake up the SVM
from suspend-to-RAM state.
Change-Id: I1825109736ace36c5c871d52dfefe4a320fea335
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
This change enables CONFIG_NL80211_TESTMODE config for
wlan host driver in holi.
Change-Id: I0974f58a2f25c14991ff4a22b998827b0a579b95
Signed-off-by: Sandeep Singh <sandsing@codeaurora.org>
Add per a6xx target member to specify the preemption record size
in case it is different than the default size for all a6xx.
Change-Id: I6e5579eae47dc4ee6707437d858b8b969fe573ea
Signed-off-by: Harshdeep Dhatt <hdhatt@codeaurora.org>
gpu_busy is an unsigned 64 bit int and accumulates overtime
while running gpu intensive application(no slumber)
which eventually results in overflow.
Change-Id: Ifda376918ac58fa393a1958101d3d4b161bdd3c0
Signed-off-by: Nitheesh Muthuraj <nmuthuraj@codeaurora.org>
The cooling device registration is using the parent node of the cpu
voltage cooling device. The devicetree configs are using the child node
to identify the cooling device. Switch to use the child device node, so
that the cooling device is bound with the thermal zone.
Change-Id: Id501421002c5dac7cb924455e09538a384ec9f85
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Update SSR power up function to wait for FW recovery complete to
avoid race condition with linux PM sleep entry.
Change-Id: Ief0d64e7699956ba30f2ff84732e36f6b2fdc3b0
Signed-off-by: Manikandan Mohan <manikand@codeaurora.org>
Change to use dyn_clk mutex from core mutex to avoid the deadlock.
Change-Id: I01a5aaba6f461255861f09e75c992d22217ae66a
Signed-off-by: George Shen <sqiao@codeaurora.org>
Modified code in driver to align DT property
name with DTSI files.
Change-Id: I6423dcc68eb1dbf73c63240b128f41476caba99c
Signed-off-by: Tapas Dey <tdey@codeaurora.org>
