mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-08 12:58:12 -04:00
904,468 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Greg Kroah-Hartman
|
b2e024e390 |
Merge branch 'android11-5.4' into branch 'android11-5.4-lts'
Do a backmerge to catch up with the recent changes in the android11-5.4 branch. Included in here are the following commits: |
||
|
Greg Kroah-Hartman
|
56e07d95b5 |
Merge tag 'android11-5.4.278_r00' into android11-5.4
This catches android11-5.4 up to the 5.4.278 LTS release. Included in here are the following commits: * |
||
|
Greg Kroah-Hartman
|
33437b2981 |
ANDROID: preserve CRC for struct tcp_sock
In commit |
||
|
Greg Kroah-Hartman
|
f90cc3d8c1 |
This is the 5.4.280 stable release
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAmaY400ACgkQONu9yGCS aT4SOxAAsnnWA4GPcspY03fxcSwl+CdgDj22VVgxDW/va/rk7fcxo000snNgo2M+ K1x9qL3SPAXVEZNIUdSU001+/pnaaVdskXRNanwIvIuZMeh2cn8qmP+MFUPHLKWH aki1FPsh3lvI3x7JVioSWNvSuiaHgeXFBPKUB4wP5J51QYiuSWGb1gIrGCsCNiHI kboMmDEo1cxSLE+0wWzhBXn921FA1Vot10SqtYwQJnAICq2TsE2YPgshiMkrYZ4e 0KbTLizk390pDT+n+Nrnoi7wNoRX/KoHz7A/94l3zwp3/xv9glqeudt+Cy9esQjo yZQDkq6LtSW8ABWjcCXPMEg2r7p8HPmiOuCP8oHBo9kHNgyePbArEPWQP+xC3vzq zeMH09m+arw8njBYdKv3c+5VVY7ABHQK3Vfo2Z3MMf5ZZgTg7f+e7uBT4RcFBriq Eyne4CLPzuuzn/BEgcoPWxwaDs8mDThbxRlfSmnDbfE7IcuDGRH7EsvFuViSKE13 ncpLJu03bs/AhZe3eiLk+AWwb4gHJD1oBNWu1CkQ5XY2S0MxYxyYdlhNpGA5yvyO RqIhrTm+ye/NlD8X1jj2WAPTR3l94TTQoBsJAhsfceusC3OeS5537hKJNL4c8O1f GZM+vbAudy529iFVru84ZZLM31RwwOqRP3LRt1sOiSZs50FZ9HE= =Q9dw -----END PGP SIGNATURE----- Merge 5.4.280 into android11-5.4-lts Changes in 5.4.280 Compiler Attributes: Add __uninitialized macro drm/lima: fix shared irq handling on driver remove media: dvb: as102-fe: Fix as10x_register_addr packing media: dvb-usb: dib0700_devices: Add missing release_firmware() IB/core: Implement a limit on UMAD receive List scsi: qedf: Make qedf_execute_tmf() non-preemptible drm/amdgpu: Initialize timestamp for some legacy SOCs drm/amd/display: Skip finding free audio for unknown engine_id media: dw2102: Don't translate i2c read into write sctp: prefer struct_size over open coded arithmetic firmware: dmi: Stop decoding on broken entry Input: ff-core - prefer struct_size over open coded arithmetic net: dsa: mv88e6xxx: Correct check for empty list media: dvb-frontends: tda18271c2dd: Remove casting during div media: s2255: Use refcount_t instead of atomic_t for num_channels media: dvb-frontends: tda10048: Fix integer overflow i2c: i801: Annotate apanel_addr as __ro_after_init powerpc/64: Set _IO_BASE to POISON_POINTER_DELTA not 0 for CONFIG_PCI=n orangefs: fix out-of-bounds fsid access powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#" jffs2: Fix potential illegal address access in jffs2_free_inode s390/pkey: Wipe sensitive data on failure tcp: tcp_mark_head_lost is only valid for sack-tcp tcp: add ece_ack flag to reno sack functions net: tcp better handling of reordering then loss cases UPSTREAM: tcp: fix DSACK undo in fast recovery to call tcp_try_to_open() tcp_metrics: validate source addr length wifi: wilc1000: fix ies_len type in connect path bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set() selftests: fix OOM in msg_zerocopy selftest selftests: make order checking verbose in msg_zerocopy selftest inet_diag: Initialize pad field in struct inet_diag_req_v2 nilfs2: fix inode number range checks nilfs2: add missing check for inode numbers on directory entries mm: optimize the redundant loop of mm_update_owner_next() can: kvaser_usb: Explicitly initialize family in leafimx driver_info struct fsnotify: Do not generate events for O_PATH file descriptors Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again" drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes drm/amdgpu/atomfirmware: silence UBSAN warning bnx2x: Fix multiple UBSAN array-index-out-of-bounds media: dw2102: fix a potential buffer overflow i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897 nvme-multipath: find NUMA path only for online numa-node nilfs2: fix incorrect inode allocation from reserved inodes filelock: fix potential use-after-free in posix_lock_inode fs/dcache: Re-use value stored to dentry->d_flags instead of re-reading vfs: don't mod negative dentry count when on shrinker list tcp: add TCP_INFO status for failed client TFO tcp: fix incorrect undo caused by DSACK of TLP retransmit octeontx2-af: Fix incorrect value output on error path in rvu_check_rsrc_availability() net: lantiq_etop: add blank line after declaration net: ethernet: lantiq_etop: fix double free in detach ppp: reject claimed-as-LCP but actually malformed packets udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port(). s390: Mark psw in __load_psw_mask() as __unitialized ARM: davinci: Convert comma to semicolon octeontx2-af: fix detection of IP layer USB: serial: option: add Telit generic core-dump composition USB: serial: option: add Telit FN912 rmnet compositions USB: serial: option: add Fibocom FM350-GL USB: serial: option: add support for Foxconn T99W651 USB: serial: option: add Netprisma LCUK54 series modules USB: serial: option: add Rolling RW350-GL variants USB: Add USB_QUIRK_NO_SET_INTF quirk for START BP-850k usb: gadget: configfs: Prevent OOB read/write in usb_string_copy() USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor hpet: Support 32-bit userspace nvmem: meson-efuse: Fix return value of nvmem callbacks ALSA: hda/realtek: Limit mic boost on VAIO PRO PX libceph: fix race between delayed_work() and ceph_monc_stop() SUNRPC: Fix RPC client cleaned up the freed pipefs dentries tcp: refactor tcp_retransmit_timer() net: tcp: fix unexcepted socket die when snd_wnd is 0 tcp: use signed arithmetic in tcp_rtx_probe0_timed_out() tcp: avoid too many retransmit packets nilfs2: fix kernel bug on rename operation of broken directory i2c: rcar: bring hardware to known state when probing Linux 5.4.280 Change-Id: Ic487769acece8eedb10cc2a310d97f453abba2f0 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> |
||
Kalesh Singh
|
adc9210e7e |
ANDROID: 16K: Don't set padding vm_flags on 32-bit archs
vma_pad_fixup_flags() and is_mergable_pad_vma() were inadvertently affecting the vm_flags on 32-bit arch, making some VMAs not mergable. This causes zygote to crash as the Art GC's heap compaction fails. The compaction depends on mremap() which will fail when operating on a range that spans multiple VMAs [1]. This can happen now due to the incorrect is_mergable_pad_vma() check. Make all the pgsize_migration APIs no-ops in 32-bit architectures, since Android only performs ELF segment extension in 64-bit archs. [1] https://github.com/torvalds/linux/blob/v6.9/mm/mremap.c#L841-L843 Bug: 353667356 Change-Id: Id9b0076ef173d75a4afc85577355d340fce03e65 Signed-off-by: Kalesh Singh <kaleshsingh@google.com> (cherry picked from commit f3437db87063f624f189e1cd38347a971fdd3fa0) |
||
Greg Kroah-Hartman
|
88d2aa8774 |
Linux 5.4.280
Link: https://lore.kernel.org/r/20240716152740.626160410@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20240717063752.619384275@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Wolfram Sang
|
392b4f1149 |
i2c: rcar: bring hardware to known state when probing
[ Upstream commit 4e36c0f20cb1c74c7bd7ea31ba432c1c4a989031 ]
When probing, the hardware is not brought into a known state. This may
be a problem when a hypervisor restarts Linux without resetting the
hardware, leaving an old state running. Make sure the hardware gets
initialized, especially interrupts should be cleared and disabled.
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/r/20240702045535.2000393-1-dirk.behme@de.bosch.com
Fixes:
|
||
Ryusuke Konishi
|
24c1c8566a |
nilfs2: fix kernel bug on rename operation of broken directory
commit a9e1ddc09ca55746079cc479aa3eb6411f0d99d4 upstream.
Syzbot reported that in rename directory operation on broken directory on
nilfs2, __block_write_begin_int() called to prepare block write may fail
BUG_ON check for access exceeding the folio/page size.
This is because nilfs_dotdot(), which gets parent directory reference
entry ("..") of the directory to be moved or renamed, does not check
consistency enough, and may return location exceeding folio/page size for
broken directories.
Fix this issue by checking required directory entries ("." and "..") in
the first chunk of the directory in nilfs_dotdot().
Link: https://lkml.kernel.org/r/20240628165107.9006-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+d3abed1ad3d367fa2627@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d3abed1ad3d367fa2627
Fixes:
|
||
Eric Dumazet
|
d2346fca5b |
tcp: avoid too many retransmit packets
commit 97a9063518f198ec0adb2ecb89789de342bb8283 upstream.
If a TCP socket is using TCP_USER_TIMEOUT, and the other peer
retracted its window to zero, tcp_retransmit_timer() can
retransmit a packet every two jiffies (2 ms for HZ=1000),
for about 4 minutes after TCP_USER_TIMEOUT has 'expired'.
The fix is to make sure tcp_rtx_probe0_timed_out() takes
icsk->icsk_user_timeout into account.
Before blamed commit, the socket would not timeout after
icsk->icsk_user_timeout, but would use standard exponential
backoff for the retransmits.
Also worth noting that before commit e89688e3e978 ("net: tcp:
fix unexcepted socket die when snd_wnd is 0"), the issue
would last 2 minutes instead of 4.
Fixes:
|
||
|
Eric Dumazet
|
2ff6dd600c |
tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()
commit 36534d3c54537bf098224a32dc31397793d4594d upstream.
Due to timer wheel implementation, a timer will usually fire
after its schedule.
For instance, for HZ=1000, a timeout between 512ms and 4s
has a granularity of 64ms.
For this range of values, the extra delay could be up to 63ms.
For TCP, this means that tp->rcv_tstamp may be after
inet_csk(sk)->icsk_timeout whenever the timer interrupt
finally triggers, if one packet came during the extra delay.
We need to make sure tcp_rtx_probe0_timed_out() handles this case.
Fixes: e89688e3e978 ("net: tcp: fix unexcepted socket die when snd_wnd is 0")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Menglong Dong <imagedong@tencent.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240607125652.1472540-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
Menglong Dong
|
8cc1b4d81a |
net: tcp: fix unexcepted socket die when snd_wnd is 0
commit e89688e3e97868451a5d05b38a9d2633d6785cd4 upstream.
In tcp_retransmit_timer(), a window shrunk connection will be regarded
as timeout if 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX'. This is not
right all the time.
The retransmits will become zero-window probes in tcp_retransmit_timer()
if the 'snd_wnd==0'. Therefore, the icsk->icsk_rto will come up to
TCP_RTO_MAX sooner or later.
However, the timer can be delayed and be triggered after 122877ms, not
TCP_RTO_MAX, as I tested.
Therefore, 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX' is always true
once the RTO come up to TCP_RTO_MAX, and the socket will die.
Fix this by replacing the 'tcp_jiffies32' with '(u32)icsk->icsk_timeout',
which is exact the timestamp of the timeout.
However, "tp->rcv_tstamp" can restart from idle, then tp->rcv_tstamp
could already be a long time (minutes or hours) in the past even on the
first RTO. So we double check the timeout with the duration of the
retransmission.
Meanwhile, making "2 * TCP_RTO_MAX" as the timeout to avoid the socket
dying too soon.
Fixes:
|
||
|
Eric Dumazet
|
39dc2b8d55 |
tcp: refactor tcp_retransmit_timer()
commit 0d580fbd2db084a5c96ee9c00492236a279d5e0f upstream.
It appears linux-4.14 stable needs a backport of commit
|
||
felix
|
7d61d1da2e |
SUNRPC: Fix RPC client cleaned up the freed pipefs dentries
commit bfca5fb4e97c46503ddfc582335917b0cc228264 upstream.
RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir()
workqueue,which takes care about pipefs superblock locking.
In some special scenarios, when kernel frees the pipefs sb of the
current client and immediately alloctes a new pipefs sb,
rpc_remove_pipedir function would misjudge the existence of pipefs
sb which is not the one it used to hold. As a result,
the rpc_remove_pipedir would clean the released freed pipefs dentries.
To fix this issue, rpc_remove_pipedir should check whether the
current pipefs sb is consistent with the original pipefs sb.
This error can be catched by KASAN:
=========================================================
[ 250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200
[ 250.498315] Read of size 4 at addr ffff88800a2ab804 by task kworker/0:18/106503
[ 250.500549] Workqueue: events rpc_free_client_work
[ 250.501001] Call Trace:
[ 250.502880] kasan_report+0xb6/0xf0
[ 250.503209] ? dget_parent+0x195/0x200
[ 250.503561] dget_parent+0x195/0x200
[ 250.503897] ? __pfx_rpc_clntdir_depopulate+0x10/0x10
[ 250.504384] rpc_rmdir_depopulate+0x1b/0x90
[ 250.504781] rpc_remove_client_dir+0xf5/0x150
[ 250.505195] rpc_free_client_work+0xe4/0x230
[ 250.505598] process_one_work+0x8ee/0x13b0
...
[ 22.039056] Allocated by task 244:
[ 22.039390] kasan_save_stack+0x22/0x50
[ 22.039758] kasan_set_track+0x25/0x30
[ 22.040109] __kasan_slab_alloc+0x59/0x70
[ 22.040487] kmem_cache_alloc_lru+0xf0/0x240
[ 22.040889] __d_alloc+0x31/0x8e0
[ 22.041207] d_alloc+0x44/0x1f0
[ 22.041514] __rpc_lookup_create_exclusive+0x11c/0x140
[ 22.041987] rpc_mkdir_populate.constprop.0+0x5f/0x110
[ 22.042459] rpc_create_client_dir+0x34/0x150
[ 22.042874] rpc_setup_pipedir_sb+0x102/0x1c0
[ 22.043284] rpc_client_register+0x136/0x4e0
[ 22.043689] rpc_new_client+0x911/0x1020
[ 22.044057] rpc_create_xprt+0xcb/0x370
[ 22.044417] rpc_create+0x36b/0x6c0
...
[ 22.049524] Freed by task 0:
[ 22.049803] kasan_save_stack+0x22/0x50
[ 22.050165] kasan_set_track+0x25/0x30
[ 22.050520] kasan_save_free_info+0x2b/0x50
[ 22.050921] __kasan_slab_free+0x10e/0x1a0
[ 22.051306] kmem_cache_free+0xa5/0x390
[ 22.051667] rcu_core+0x62c/0x1930
[ 22.051995] __do_softirq+0x165/0x52a
[ 22.052347]
[ 22.052503] Last potentially related work creation:
[ 22.052952] kasan_save_stack+0x22/0x50
[ 22.053313] __kasan_record_aux_stack+0x8e/0xa0
[ 22.053739] __call_rcu_common.constprop.0+0x6b/0x8b0
[ 22.054209] dentry_free+0xb2/0x140
[ 22.054540] __dentry_kill+0x3be/0x540
[ 22.054900] shrink_dentry_list+0x199/0x510
[ 22.055293] shrink_dcache_parent+0x190/0x240
[ 22.055703] do_one_tree+0x11/0x40
[ 22.056028] shrink_dcache_for_umount+0x61/0x140
[ 22.056461] generic_shutdown_super+0x70/0x590
[ 22.056879] kill_anon_super+0x3a/0x60
[ 22.057234] rpc_kill_sb+0x121/0x200
Fixes:
|
||
Ilya Dryomov
|
63e5d035e3 |
libceph: fix race between delayed_work() and ceph_monc_stop()
commit 69c7b2fe4c9cc1d3b1186d1c5606627ecf0de883 upstream.
The way the delayed work is handled in ceph_monc_stop() is prone to
races with mon_fault() and possibly also finish_hunting(). Both of
these can requeue the delayed work which wouldn't be canceled by any of
the following code in case that happens after cancel_delayed_work_sync()
runs -- __close_session() doesn't mess with the delayed work in order
to avoid interfering with the hunting interval logic. This part was
missed in commit
|
||
Edson Juliano Drosdeck
|
2b59187cf0 |
ALSA: hda/realtek: Limit mic boost on VAIO PRO PX
commit 6db03b1929e207d2c6e84e75a9cd78124b3d6c6d upstream. The internal mic boost on the VAIO models VJFE-CL and VJFE-IL is too high. Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine to limit the gain. Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240705141012.5368-1-edson.drosdeck@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Joy Chakraborty
|
427524ff30 |
nvmem: meson-efuse: Fix return value of nvmem callbacks
commit 7a0a6d0a7c805f9380381f4deedffdf87b93f408 upstream.
Read/write callbacks registered with nvmem core expect 0 to be returned
on success and a negative value to be returned on failure.
meson_efuse_read() and meson_efuse_write() call into
meson_sm_call_read() and meson_sm_call_write() respectively which return
the number of bytes read or written on success as per their api
description.
Fix to return error if meson_sm_call_read()/meson_sm_call_write()
returns an error else return 0.
Fixes:
|
||
He Zhe
|
db18df897d |
hpet: Support 32-bit userspace
commit 4e60131d0d36af65ab9c9144f4f163fe97ae36e8 upstream.
hpet_compat_ioctl and read file operations failed to handle parameters from
32-bit userspace and thus samples/timers/hpet_example.c fails as below.
root@intel-x86-64:~# ./hpet_example-32.out poll /dev/hpet 1 2
-hpet: executing poll
hpet_poll: HPET_IRQFREQ failed
This patch fixes cmd and arg handling in hpet_compat_ioctl and adds compat
handling for 32-bit userspace in hpet_read.
hpet_example now shows that it works for both 64-bit and 32-bit.
root@intel-x86-64:~# ./hpet_example-32.out poll /dev/hpet 1 2
-hpet: executing poll
hpet_poll: info.hi_flags 0x0
hpet_poll: expired time = 0xf4298
hpet_poll: revents = 0x1
hpet_poll: data 0x1
hpet_poll: expired time = 0xf4235
hpet_poll: revents = 0x1
hpet_poll: data 0x1
root@intel-x86-64:~# ./hpet_example-64.out poll /dev/hpet 1 2
-hpet: executing poll
hpet_poll: info.hi_flags 0x0
hpet_poll: expired time = 0xf42a1
hpet_poll: revents = 0x1
hpet_poll: data 0x1
hpet_poll: expired time = 0xf4232
hpet_poll: revents = 0x1
hpet_poll: data 0x1
Cc: stable@vger.kernel.org
Signed-off-by: He Zhe <zhe.he@windriver.com>
Fixes:
|
||
Alan Stern
|
60abea505b |
USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor
commit a368ecde8a5055b627749b09c6218ef793043e47 upstream.
Syzbot has identified a bug in usbcore (see the Closes: tag below)
caused by our assumption that the reserved bits in an endpoint
descriptor's bEndpointAddress field will always be 0. As a result of
the bug, the endpoint_is_duplicate() routine in config.c (and possibly
other routines as well) may believe that two descriptors are for
distinct endpoints, even though they have the same direction and
endpoint number. This can lead to confusion, including the bug
identified by syzbot (two descriptors with matching endpoint numbers
and directions, where one was interrupt and the other was bulk).
To fix the bug, we will clear the reserved bits in bEndpointAddress
when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1
specs say these bits are "Reserved, reset to zero".) This requires us
to make a copy of the descriptor earlier in usb_parse_endpoint() and
use the copy instead of the original when checking for duplicates.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+8693a0bb9c10b554272a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/0000000000003d868e061bc0f554@google.com/
Fixes:
|
||
Lee Jones
|
c95fbdde87 |
usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()
commit 6d3c721e686ea6c59e18289b400cc95c76e927e0 upstream. Userspace provided string 's' could trivially have the length zero. Left unchecked this will firstly result in an OOB read in the form `if (str[0 - 1] == '\n') followed closely by an OOB write in the form `str[0 - 1] = '\0'`. There is already a validating check to catch strings that are too long. Let's supply an additional check for invalid strings that are too short. Signed-off-by: Lee Jones <lee@kernel.org> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20240705074339.633717-1-lee@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
WangYuli
|
4fdf8c1442 |
USB: Add USB_QUIRK_NO_SET_INTF quirk for START BP-850k
commit 3859e85de30815a20bce7db712ce3d94d40a682d upstream. START BP-850K is a dot matrix printer that crashes when it receives a Set-Interface request and needs USB_QUIRK_NO_SET_INTF to work properly. Cc: stable <stable@kernel.org> Signed-off-by: jinxiaobo <jinxiaobo@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Link: https://lore.kernel.org/r/202E4B2BD0F0FEA4+20240702154408.631201-1-wangyuli@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Vanillan Wang
|
421fcde004 |
USB: serial: option: add Rolling RW350-GL variants
commit ae420771551bd9f04347c59744dd062332bdec3e upstream. Update the USB serial option driver support for the Rolling RW350-GL - VID:PID 33f8:0802, RW350-GL are laptop M.2 cards (with MBIM interfaces for /Linux/Chrome OS) Here are the outputs of usb-devices: usbmode=63: mbim, pipe T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0802 Rev=00.01 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=USB DATA CARD C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms usbmode=64: mbim, others at (If#= 5 adb) MBIM(MI0) + GNSS(MI2) + AP log(MI3) + AP META(MI4) + ADB(MI5) + MD AT(MI6) + MD META(MI7) + NPT(MI8) + Debug(MI9) T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0802 Rev=00.01 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=USB DATA CARD C: #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=08(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=09(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Vanillan Wang <vanillanwang@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Mank Wang
|
c16c577cc6 |
USB: serial: option: add Netprisma LCUK54 series modules
commit dc6dbe3ed28795b01c712ad8f567728f9c14b01d upstream. Add support for Netprisma LCUK54 series modules. LCUK54-WRD-LWW(0x3731/0x0100): NetPrisma LCUK54-WWD for Global LCUK54-WRD-LWW(0x3731/0x0101): NetPrisma LCUK54-WRD for Global SKU LCUK54-WRD-LCN(0x3731/0x0106): NetPrisma LCUK54-WRD for China SKU LCUK54-WRD-LWW(0x3731/0x0111): NetPrisma LCUK54-WWD for SA LCUK54-WRD-LWW(0x3731/0x0112): NetPrisma LCUK54-WWD for EU LCUK54-WRD-LWW(0x3731/0x0113): NetPrisma LCUK54-WWD for NA LCUK54-WWD-LCN(0x3731/0x0115): NetPrisma LCUK54-WWD for China EDU LCUK54-WWD-LWW(0x3731/0x0116): NetPrisma LCUK54-WWD for Golbal EDU Above products use the exact same interface layout and option driver: MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=3731 ProdID=0101 Rev= 5.04 S: Manufacturer=NetPrisma S: Product=LCUK54-WRD S: SerialNumber=b6250c36 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Mank Wang <mank.wang@netprisma.us> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Slark Xiao
|
97fc18b2af |
USB: serial: option: add support for Foxconn T99W651
commit 3c841d54b63e4446383de3238399a3910e47d8e2 upstream. T99W651 is a RNDIS based modem device. There are 3 serial ports need to be enumerated: Diag, NMEA and AT. Test evidence as below: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e145 Rev=05.15 S: Manufacturer=QCOM S: Product=SDXPINN-IDP _SN:93B562B2 S: SerialNumber=82e6fe26 C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x5 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) I: If#=0x6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) 0&1: RNDIS, 2:AT, 3:NMEA, 4:DIAG, 5:QDSS, 6:ADB QDSS is not a serial port. Signed-off-by: Slark Xiao <slark_xiao@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Bjørn Mork
|
a647d795ef |
USB: serial: option: add Fibocom FM350-GL
commit 2604e08ff251dba330e16b65e80074c9c540aad7 upstream. FM350-GL is 5G Sub-6 WWAN module which uses M.2 form factor interface. It is based on Mediatek's MTK T700 CPU. The module supports PCIe Gen3 x1 and USB 2.0 and 3.0 interfaces. The manufacturer states that USB is "for debug" but it has been confirmed to be fully functional, except for modem-control requests on some of the interfaces. USB device composition is controlled by AT+GTUSBMODE=<mode> command. Two values are currently supported for the <mode>: 40: RNDIS+AT+AP(GNSS)+META+DEBUG+NPT+ADB 41: RNDIS+AT+AP(GNSS)+META+DEBUG+NPT+ADB+AP(LOG)+AP(META) (default value) [ Note that the functions above are not ordered by interface number. ] Mode 40 corresponds to: T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 22 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=7126 Rev= 0.01 S: Manufacturer=Fibocom Wireless Inc. S: Product=FM350-GL C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Mode 41 corresponds to: T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=7127 Rev= 0.01 S: Manufacturer=Fibocom Wireless Inc. S: Product=FM350-GL C:* #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Daniele Palmas
|
6877a78894 |
USB: serial: option: add Telit FN912 rmnet compositions
commit 9a590ff283421b71560deded2110dbdcbe1f7d1d upstream. Add the following Telit FN912 compositions: 0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=3000 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN912 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=3001 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN912 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Daniele Palmas
|
895b666846 |
USB: serial: option: add Telit generic core-dump composition
commit 4298e400dbdbf259549d69c349e060652ad53611 upstream. Add the following core-dump composition, used in different Telit modems: 0x9000: tty (sahara) T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 41 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=9000 Rev=00.00 S: Manufacturer=Telit Cinterion S: Product=FN990-dump S: SerialNumber=e815bdde C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Michal Mazur
|
b7ea5bea1e |
octeontx2-af: fix detection of IP layer
[ Upstream commit 404dc0fd6fb0bb942b18008c6f8c0320b80aca20 ]
Checksum and length checks are not enabled for IPv4 header with
options and IPv6 with extension headers.
To fix this a change in enum npc_kpu_lc_ltype is required which will
allow adjustment of LTYPE_MASK to detect all types of IP headers.
Fixes:
|
||
Chen Ni
|
833a64978a |
ARM: davinci: Convert comma to semicolon
[ Upstream commit acc3815db1a02d654fbc19726ceaadca0d7dd81c ]
Replace a comma between expression statements by a semicolon.
Fixes:
|
||
Sven Schnelle
|
834681e42a |
s390: Mark psw in __load_psw_mask() as __unitialized
[ Upstream commit 7278a8fb8d032dfdc03d9b5d17e0bc451cdc1492 ] Without __unitialized, the following code is generated when INIT_STACK_ALL_ZERO is enabled: 86: d7 0f f0 a0 f0 a0 xc 160(16,%r15), 160(%r15) 8c: e3 40 f0 a0 00 24 stg %r4, 160(%r15) 92: c0 10 00 00 00 08 larl %r1, 0xa2 98: e3 10 f0 a8 00 24 stg %r1, 168(%r15) 9e: b2 b2 f0 a0 lpswe 160(%r15) The xc is not adding any security because psw is fully initialized with the following instructions. Add __unitialized to the psw definitiation to avoid the superfluous clearing of psw. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
Kuniyuki Iwashima
|
7a67c4e476 |
udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().
[ Upstream commit 5c0b485a8c6116516f33925b9ce5b6104a6eadfd ]
syzkaller triggered the warning [0] in udp_v4_early_demux().
In udp_v[46]_early_demux() and sk_lookup(), we do not touch the refcount
of the looked-up sk and use sock_pfree() as skb->destructor, so we check
SOCK_RCU_FREE to ensure that the sk is safe to access during the RCU grace
period.
Currently, SOCK_RCU_FREE is flagged for a bound socket after being put
into the hash table. Moreover, the SOCK_RCU_FREE check is done too early
in udp_v[46]_early_demux() and sk_lookup(), so there could be a small race
window:
CPU1 CPU2
---- ----
udp_v4_early_demux() udp_lib_get_port()
| |- hlist_add_head_rcu()
|- sk = __udp4_lib_demux_lookup() |
|- DEBUG_NET_WARN_ON_ONCE(sk_is_refcounted(sk));
`- sock_set_flag(sk, SOCK_RCU_FREE)
We had the same bug in TCP and fixed it in commit 871019b22d1b ("net:
set SOCK_RCU_FREE before inserting socket into hashtable").
Let's apply the same fix for UDP.
[0]:
WARNING: CPU: 0 PID: 11198 at net/ipv4/udp.c:2599 udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599
Modules linked in:
CPU: 0 PID: 11198 Comm: syz-executor.1 Not tainted 6.9.0-g93bda33046e7 #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599
Code: c5 7a 15 fe bb 01 00 00 00 44 89 e9 31 ff d3 e3 81 e3 bf ef ff ff 89 de e8 2c 74 15 fe 85 db 0f 85 02 06 00 00 e8 9f 7a 15 fe <0f> 0b e8 98 7a 15 fe 49 8d 7e 60 e8 4f 39 2f fe 49 c7 46 60 20 52
RSP: 0018:ffffc9000ce3fa58 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8318c92c
RDX: ffff888036ccde00 RSI: ffffffff8318c2f1 RDI: 0000000000000001
RBP: ffff88805a2dd6e0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0001ffffffffffff R12: ffff88805a2dd680
R13: 0000000000000007 R14: ffff88800923f900 R15: ffff88805456004e
FS: 00007fc449127640(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc449126e38 CR3: 000000003de4b002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
PKRU: 55555554
Call Trace:
<TASK>
ip_rcv_finish_core.constprop.0+0xbdd/0xd20 net/ipv4/ip_input.c:349
ip_rcv_finish+0xda/0x150 net/ipv4/ip_input.c:447
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip_rcv+0x16c/0x180 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core+0xb3/0xe0 net/core/dev.c:5624
__netif_receive_skb+0x21/0xd0 net/core/dev.c:5738
netif_receive_skb_internal net/core/dev.c:5824 [inline]
netif_receive_skb+0x271/0x300 net/core/dev.c:5884
tun_rx_batched drivers/net/tun.c:1549 [inline]
tun_get_user+0x24db/0x2c50 drivers/net/tun.c:2002
tun_chr_write_iter+0x107/0x1a0 drivers/net/tun.c:2048
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0x76f/0x8d0 fs/read_write.c:590
ksys_write+0xbf/0x190 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0x41/0x50 fs/read_write.c:652
x64_sys_call+0xe66/0x1990 arch/x86/include/generated/asm/syscalls_64.h:2
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4b/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fc44a68bc1f
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 e9 cf f5 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 3c d0 f5 ff 48
RSP: 002b:00007fc449126c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000004bc050 RCX: 00007fc44a68bc1f
RDX: 0000000000000032 RSI: 00000000200000c0 RDI: 00000000000000c8
RBP: 00000000004bc050 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000032 R11: 0000000000000293 R12: 0000000000000000
R13: 000000000000000b R14: 00007fc44a5ec530 R15: 0000000000000000
</TASK>
Fixes:
|
||
Dmitry Antipov
|
6e8f1c2117 |
ppp: reject claimed-as-LCP but actually malformed packets
[ Upstream commit f2aeb7306a898e1cbd03963d376f4b6656ca2b55 ]
Since 'ppp_async_encode()' assumes valid LCP packets (with code
from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that
LCP packet has an actual body beyond PPP_LCP header bytes, and
reject claimed-as-LCP but actually malformed data otherwise.
Reported-by: syzbot+ec0723ba9605678b14bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ec0723ba9605678b14bf
Fixes:
|
||
Aleksander Jan Bajkowski
|
907443174e |
net: ethernet: lantiq_etop: fix double free in detach
[ Upstream commit e1533b6319ab9c3a97dad314dd88b3783bc41b69 ]
The number of the currently released descriptor is never incremented
which results in the same skb being released multiple times.
Fixes:
|
||
|
Aleksander Jan Bajkowski
|
b1f3921335 |
net: lantiq_etop: add blank line after declaration
[ Upstream commit 4c46625bb586a741b8d0e6bdbddbcb2549fa1d36 ] This patch adds a missing line after the declaration and fixes the checkpatch warning: WARNING: Missing a blank line after declarations + int desc; + for (desc = 0; desc < LTQ_DESC_NUM; desc++) Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Link: https://lore.kernel.org/r/20211228220031.71576-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: e1533b6319ab ("net: ethernet: lantiq_etop: fix double free in detach") Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
Aleksandr Mishin
|
73c2119833 |
octeontx2-af: Fix incorrect value output on error path in rvu_check_rsrc_availability()
[ Upstream commit 442e26af9aa8115c96541026cbfeaaa76c85d178 ]
In rvu_check_rsrc_availability() in case of invalid SSOW req, an incorrect
data is printed to error log. 'req->sso' value is printed instead of
'req->ssow'. Looks like "copy-paste" mistake.
Fix this mistake by replacing 'req->sso' with 'req->ssow'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
|
||
Neal Cardwell
|
47d4a1f8fc |
tcp: fix incorrect undo caused by DSACK of TLP retransmit
[ Upstream commit 0ec986ed7bab6801faed1440e8839dcc710331ff ]
Loss recovery undo_retrans bookkeeping had a long-standing bug where a
DSACK from a spurious TLP retransmit packet could cause an erroneous
undo of a fast recovery or RTO recovery that repaired a single
really-lost packet (in a sequence range outside that of the TLP
retransmit). Basically, because the loss recovery state machine didn't
account for the fact that it sent a TLP retransmit, the DSACK for the
TLP retransmit could erroneously be implicitly be interpreted as
corresponding to the normal fast recovery or RTO recovery retransmit
that plugged a real hole, thus resulting in an improper undo.
For example, consider the following buggy scenario where there is a
real packet loss but the congestion control response is improperly
undone because of this bug:
+ send packets P1, P2, P3, P4
+ P1 is really lost
+ send TLP retransmit of P4
+ receive SACK for original P2, P3, P4
+ enter fast recovery, fast-retransmit P1, increment undo_retrans to 1
+ receive DSACK for TLP P4, decrement undo_retrans to 0, undo (bug!)
+ receive cumulative ACK for P1-P4 (fast retransmit plugged real hole)
The fix: when we initialize undo machinery in tcp_init_undo(), if
there is a TLP retransmit in flight, then increment tp->undo_retrans
so that we make sure that we receive a DSACK corresponding to the TLP
retransmit, as well as DSACKs for all later normal retransmits, before
triggering a loss recovery undo. Note that we also have to move the
line that clears tp->tlp_high_seq for RTO recovery, so that upon RTO
we remember the tp->tlp_high_seq value until tcp_init_undo() and clear
it only afterward.
Also note that the bug dates back to the original 2013 TLP
implementation, commit
|
||
Jason Baron
|
fe7a7b8942 |
tcp: add TCP_INFO status for failed client TFO
[ Upstream commit 480274787d7e3458bc5a7cfbbbe07033984ad711 ]
The TCPI_OPT_SYN_DATA bit as part of tcpi_options currently reports whether
or not data-in-SYN was ack'd on both the client and server side. We'd like
to gather more information on the client-side in the failure case in order
to indicate the reason for the failure. This can be useful for not only
debugging TFO, but also for creating TFO socket policies. For example, if
a middle box removes the TFO option or drops a data-in-SYN, we can
can detect this case, and turn off TFO for these connections saving the
extra retransmits.
The newly added tcpi_fastopen_client_fail status is 2 bits and has the
following 4 states:
1) TFO_STATUS_UNSPEC
Catch-all state which includes when TFO is disabled via black hole
detection, which is indicated via LINUX_MIB_TCPFASTOPENBLACKHOLE.
2) TFO_COOKIE_UNAVAILABLE
If TFO_CLIENT_NO_COOKIE mode is off, this state indicates that no cookie
is available in the cache.
3) TFO_DATA_NOT_ACKED
Data was sent with SYN, we received a SYN/ACK but it did not cover the data
portion. Cookie is not accepted by server because the cookie may be invalid
or the server may be overloaded.
4) TFO_SYN_RETRANSMITTED
Data was sent with SYN, we received a SYN/ACK which did not cover the data
after at least 1 additional SYN was sent (without data). It may be the case
that a middle-box is dropping data-in-SYN packets. Thus, it would be more
efficient to not use TFO on this connection to avoid extra retransmits
during connection establishment.
These new fields do not cover all the cases where TFO may fail, but other
failures, such as SYN/ACK + data being dropped, will result in the
connection not becoming established. And a connection blackhole after
session establishment shows up as a stalled connection.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Christoph Paasch <cpaasch@apple.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 0ec986ed7bab ("tcp: fix incorrect undo caused by DSACK of TLP retransmit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
||
Brian Foster
|
ec48e8e343 |
vfs: don't mod negative dentry count when on shrinker list
[ Upstream commit aabfe57ebaa75841db47ea59091ec3c5a06d2f52 ]
The nr_dentry_negative counter is intended to only account negative
dentries that are present on the superblock LRU. Therefore, the LRU
add, remove and isolate helpers modify the counter based on whether
the dentry is negative, but the shrinker list related helpers do not
modify the counter, and the paths that change a dentry between
positive and negative only do so if DCACHE_LRU_LIST is set.
The problem with this is that a dentry on a shrinker list still has
DCACHE_LRU_LIST set to indicate ->d_lru is in use. The additional
DCACHE_SHRINK_LIST flag denotes whether the dentry is on LRU or a
shrink related list. Therefore if a relevant operation (i.e. unlink)
occurs while a dentry is present on a shrinker list, and the
associated codepath only checks for DCACHE_LRU_LIST, then it is
technically possible to modify the negative dentry count for a
dentry that is off the LRU. Since the shrinker list related helpers
do not modify the negative dentry count (because non-LRU dentries
should not be included in the count) when the dentry is ultimately
removed from the shrinker list, this can cause the negative dentry
count to become permanently inaccurate.
This problem can be reproduced via a heavy file create/unlink vs.
drop_caches workload. On an 80xcpu system, I start 80 tasks each
running a 1k file create/delete loop, and one task spinning on
drop_caches. After 10 minutes or so of runtime, the idle/clean cache
negative dentry count increases from somewhere in the range of 5-10
entries to several hundred (and increasingly grows beyond
nr_dentry_unused).
Tweak the logic in the paths that turn a dentry negative or positive
to filter out the case where the dentry is present on a shrink
related list. This allows the above workload to maintain an accurate
negative dentry count.
Fixes:
|
||
linke li
|
c0d80ea39a |
fs/dcache: Re-use value stored to dentry->d_flags instead of re-reading
[ Upstream commit 8bfb40be31ddea0cb4664b352e1797cfe6c91976 ] Currently, the __d_clear_type_and_inode() writes the value flags to dentry->d_flags, then immediately re-reads it in order to use it in a if statement. This re-read is useless because no other update to dentry->d_flags can occur at this point. This commit therefore re-use flags in the if statement instead of re-reading dentry->d_flags. Signed-off-by: linke li <lilinke99@qq.com> Link: https://lore.kernel.org/r/tencent_5E187BD0A61BA28605E85405F15228254D0A@qq.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> Stable-dep-of: aabfe57ebaa7 ("vfs: don't mod negative dentry count when on shrinker list") Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
Jeff Layton
|
1cbbb3d947 |
filelock: fix potential use-after-free in posix_lock_inode
[ Upstream commit 1b3ec4f7c03d4b07bad70697d7e2f4088d2cfe92 ]
Light Hsieh reported a KASAN UAF warning in trace_posix_lock_inode().
The request pointer had been changed earlier to point to a lock entry
that was added to the inode's list. However, before the tracepoint could
fire, another task raced in and freed that lock.
Fix this by moving the tracepoint inside the spinlock, which should
ensure that this doesn't happen.
Fixes: 74f6f5912693 ("locks: fix KASAN: use-after-free in trace_event_raw_event_filelock_lock")
Link: https://lore.kernel.org/linux-fsdevel/724ffb0a2962e912ea62bb0515deadf39c325112.camel@kernel.org/
Reported-by: Light Hsieh (謝明燈) <Light.Hsieh@mediatek.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240702-filelock-6-10-v1-1-96e766aadc98@kernel.org
Reviewed-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
||
|
Ryusuke Konishi
|
4380b1af28 |
nilfs2: fix incorrect inode allocation from reserved inodes
commit 93aef9eda1cea9e84ab2453fcceb8addad0e46f1 upstream.
If the bitmap block that manages the inode allocation status is corrupted,
nilfs_ifile_create_inode() may allocate a new inode from the reserved
inode area where it should not be allocated.
Previous fix commit d325dc6eb763 ("nilfs2: fix use-after-free bug of
struct nilfs_root"), fixed the problem that reserved inodes with inode
numbers less than NILFS_USER_INO (=11) were incorrectly reallocated due to
bitmap corruption, but since the start number of non-reserved inodes is
read from the super block and may change, in which case inode allocation
may occur from the extended reserved inode area.
If that happens, access to that inode will cause an IO error, causing the
file system to degrade to an error state.
Fix this potential issue by adding a wraparound option to the common
metadata object allocation routine and by modifying
nilfs_ifile_create_inode() to disable the option so that it only allocates
inodes with inode numbers greater than or equal to the inode number read
in "nilfs->ns_first_ino", regardless of the bitmap status of reserved
inodes.
Link: https://lkml.kernel.org/r/20240623051135.4180-4-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
Nilay Shroff
|
262f126ebb |
nvme-multipath: find NUMA path only for online numa-node
[ Upstream commit d3a043733f25d743f3aa617c7f82dbcb5ee2211a ] In current native multipath design when a shared namespace is created, we loop through each possible numa-node, calculate the NUMA distance of that node from each nvme controller and then cache the optimal IO path for future reference while sending IO. The issue with this design is that we may refer to the NUMA distance table for an offline node which may not be populated at the time and so we may inadvertently end up finding and caching a non-optimal path for IO. Then latter when the corresponding numa-node becomes online and hence the NUMA distance table entry for that node is created, ideally we should re-calculate the multipath node distance for the newly added node however that doesn't happen unless we rescan/reset the controller. So essentially, we may keep using non-optimal IO path for a node which is made online after namespace is created. This patch helps fix this issue ensuring that when a shared namespace is created, we calculate the multipath node distance for each online numa-node instead of each possible numa-node. Then latter when a node becomes online and we receive any IO on that newly added node, we would calculate the multipath node distance for newly added node but this time NUMA distance table would have been already populated for newly added node. Hence we would be able to correctly calculate the multipath node distance and choose the optimal path for the IO. Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
Jian-Hong Pan
|
88f5c27988 |
ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
[ Upstream commit 45e37f9ce28d248470bab4376df2687a215d1b22 ] JP-IK LEAP W502 laptop's headset mic is not enabled until ALC897_FIXUP_HEADSET_MIC_PIN3 quirk is applied. Here is the original pin node values: 0x11 0x40000000 0x12 0xb7a60130 0x14 0x90170110 0x15 0x411111f0 0x16 0x411111f0 0x17 0x411111f0 0x18 0x411111f0 0x19 0x411111f0 0x1a 0x411111f0 0x1b 0x03211020 0x1c 0x411111f0 0x1d 0x4026892d 0x1e 0x411111f0 0x1f 0x411111f0 Signed-off-by: Jian-Hong Pan <jhp@endlessos.org> Link: https://lore.kernel.org/r/20240520055008.7083-2-jhp@endlessos.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
Piotr Wojtaszczyk
|
effe0500af |
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
[ Upstream commit f63b94be6942ba82c55343e196bd09b53227618e ]
When del_timer_sync() is called in an interrupt context it throws a warning
because of potential deadlock. The timer is used only to exit from
wait_for_completion() after a timeout so replacing the call with
wait_for_completion_timeout() allows to remove the problematic timer and
its related functions altogether.
Fixes:
|
||
Mauro Carvalho Chehab
|
40945660b4 |
media: dw2102: fix a potential buffer overflow
commit 1c73d0b29d04bf4082e7beb6a508895e118ee30d upstream.
As pointed by smatch:
drivers/media/usb/dvb-usb/dw2102.c:802 su3000_i2c_transfer() error: __builtin_memcpy() '&state->data[4]' too small (64 vs 67)
That seemss to be due to a wrong copy-and-paste.
Fixes: 0e148a522b84 ("media: dw2102: Don't translate i2c read into write")
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
Ghadi Elie Rahme
|
cbe5308702 |
bnx2x: Fix multiple UBSAN array-index-out-of-bounds
commit 134061163ee5ca4759de5c24ca3bd71608891ba7 upstream.
Fix UBSAN warnings that occur when using a system with 32 physical
cpu cores or more, or when the user defines a number of Ethernet
queues greater than or equal to FP_SB_MAX_E1x using the num_queues
module parameter.
Currently there is a read/write out of bounds that occurs on the array
"struct stats_query_entry query" present inside the "bnx2x_fw_stats_req"
struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h".
Looking at the definition of the "struct stats_query_entry query" array:
struct stats_query_entry query[FP_SB_MAX_E1x+
BNX2X_FIRST_QUEUE_QUERY_IDX];
FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and
has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3
meaning the array has a total size of 19.
Since accesses to "struct stats_query_entry query" are offset-ted by
BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet
queues should not exceed FP_SB_MAX_E1x (16). However one of these queues
is reserved for FCOE and thus the number of Ethernet queues should be set
to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if
it is not.
This is also described in a comment in the source code in
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition
of FP_SB_MAX_E1x. Below is the part of this explanation that it important
for this patch
/*
* The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is
* control by the number of fast-path status blocks supported by the
* device (HW/FW). Each fast-path status block (FP-SB) aka non-default
* status block represents an independent interrupts context that can
* serve a regular L2 networking queue. However special L2 queues such
* as the FCoE queue do not require a FP-SB and other components like
* the CNIC may consume FP-SB reducing the number of possible L2 queues
*
* If the maximum number of FP-SB available is X then:
* a. If CNIC is supported it consumes 1 FP-SB thus the max number of
* regular L2 queues is Y=X-1
* b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor)
* c. If the FCoE L2 queue is supported the actual number of L2 queues
* is Y+1
* d. The number of irqs (MSIX vectors) is either Y+1 (one extra for
* slow-path interrupts) or Y+2 if CNIC is supported (one additional
* FP interrupt context for the CNIC).
* e. The number of HW context (CID count) is always X or X+1 if FCoE
* L2 queue is supported. The cid for the FCoE L2 queue is always X.
*/
However this driver also supports NICs that use the E2 controller which can
handle more queues due to having more FP-SB represented by FP_SB_MAX_E2.
Looking at the commits when the E2 support was added, it was originally
using the E1x parameters: commit
|
||
Alex Deucher
|
917c0e2f15 |
drm/amdgpu/atomfirmware: silence UBSAN warning
commit d0417264437a8fa05f894cabba5a26715b32d78e upstream. This is a variable sized array. Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/110420.html Tested-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Ma Ke
|
e36364f5f3 |
drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
commit 80bec6825b19d95ccdfd3393cf8ec15ff2a749b4 upstream.
In nouveau_connector_get_modes(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a possible NULL pointer
dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Fixes:
|
||
Jan Kara
|
23a28f5f3f |
Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"
commit 30139c702048f1097342a31302cbd3d478f50c63 upstream. Patch series "mm: Avoid possible overflows in dirty throttling". Dirty throttling logic assumes dirty limits in page units fit into 32-bits. This patch series makes sure this is true (see patch 2/2 for more details). This patch (of 2): This reverts commit 9319b647902cbd5cc884ac08a8a6d54ce111fc78. The commit is broken in several ways. Firstly, the removed (u64) cast from the multiplication will introduce a multiplication overflow on 32-bit archs if wb_thresh * bg_thresh >= 1<<32 (which is actually common - the default settings with 4GB of RAM will trigger this). Secondly, the div64_u64() is unnecessarily expensive on 32-bit archs. We have div64_ul() in case we want to be safe & cheap. Thirdly, if dirty thresholds are larger than 1<<32 pages, then dirty balancing is going to blow up in many other spectacular ways anyway so trying to fix one possible overflow is just moot. Link: https://lkml.kernel.org/r/20240621144017.30993-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240621144246.11148-1-jack@suse.cz Fixes: 9319b647902c ("mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-By: Zach O'Keefe <zokeefe@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jan Kara
|
7cfcb65054 |
fsnotify: Do not generate events for O_PATH file descriptors
commit 702eb71fd6501b3566283f8c96d7ccc6ddd662e9 upstream. Currently we will not generate FS_OPEN events for O_PATH file descriptors but we will generate FS_CLOSE events for them. This is asymmetry is confusing. Arguably no fsnotify events should be generated for O_PATH file descriptors as they cannot be used to access or modify file content, they are just convenient handles to file objects like paths. So fix the asymmetry by stopping to generate FS_CLOSE for O_PATH file descriptors. Cc: <stable@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240617162303.1596-1-jack@suse.cz Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Jimmy Assarsson
|
6ac691872e |
can: kvaser_usb: Explicitly initialize family in leafimx driver_info struct
commit 19d5b2698c35b2132a355c67b4d429053804f8cc upstream.
Explicitly set the 'family' driver_info struct member for leafimx.
Previously, the correct operation relied on KVASER_LEAF being the first
defined value in enum kvaser_usb_leaf_family.
Fixes: e6c80e601053 ("can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression")
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20240628194529.312968-1-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|