Comment in the api specifies that qdf_mem_cmp api
return bool value which is not correct.
Replace bool to int to reflect the correct return
type of a qdf_mem_cmp api.
Change-Id: Iff83fbf588a072dcda8b0aaef3c6743e572b1ac5
CRs-Fixed: 1066946
Non-TLV registrations for atf_peer, atf_group and lcr WMI command were
missed out during the WMI convergence implementation. This change adds
the missed out registrations.
Change-Id: I384c27709e088c06ee73f17b7dc1a52bb5c63370
CRs-Fixed: 1069863
PEER assoc command failed in the tlv validation check.
Tlv length sent in the TLV header is different from
the length used to fill the tlv buffer which caused
failure at tlv validation.
Modified code to use the aligned length while
filling the tlv buffer.
Change-Id: I9ad2009315dd3cf37308ef44360d566035344950
CRs-Fixed: 1069008
propagation from qcacld-2.0 to qcacmn.
PCIe link training failure will not be indicated to cnss client driver
as a link down indication.
In System/Runtime PM resume callbacks, client driver will access the target
registers results in L2 errors.
Fix it by ensuring the PCIe link resume training is completed by reading
config space device-id.
Change-Id: I8be902330215cf3c8cb0700e6f0da5b69e274c96
CRs-Fixed: 1052965
qcacld-2.0 to qcacmn propagation
As Current WMI interface need both the ARP/NS configuration
in single command. To support active offload host need to
cache the ARP/NS at wma layer so host can fill the other
request and configure down to firmware complete request
(ARP+NS).
Change-Id: Ie0a57d216379817ff0ae48f4f582c9108e8ecca1
CRs-Fixed: 1067683
These fixes are made during qca8074 VP control path bringup.
Add fixes in tlv.c and enable TLV helper routines for WIN.
Fixed some inconsistencies in wmi API params by adding compiler flags.
This needs to be cleaned up so that API and params have common interface
between WIN and MCL.
Change-Id: I0821daa58df86ad0b394a7846a982a9e3577cd14
CRs-Fixed: 1063252
SRNG based target uses SRNG(Standard Ring) interface to implement all
the ring related access functions. This change provides CE services to
use interact with SRNG for CE access. It uses hal_srng module for HW
related access. It implements src ring using SRNG src ring and
destination ring using dest and status ring.
fastpath and batch send is not implemented as these are not applicable
to this target
Change-Id: I3e2b613004a08d669319f956d7b0656447eb8521
CRs-Fixed: 1042915
This change is applicable to Hawkeye VP bringup. It is added under
QCA_WIFI_QCA8074_VP flag
Change-Id: Ief32afebf2a306425e33e4ebc56351f10c609198
CRs-Fixed: 1063252
Instead of checking target type, check bus type for skipping soc-sleep
durring driver load code. Also enhance comments to explain why
hif_pci_target_sleep_state_adjust is called instead of
hif_target_sleep_state_adjust for the disable soc-sleep
durring driver load feature
Change-Id: I891e1b1782b46b32c1718e2c539215282e090bad
Moving global variables host_ce_config and target_ce_config to
per radio structure.
Change-Id: Iaaee722af16812e06aae068f0fa0092cf5c8f78a
CRs-Fixed: 1042915
Address compilation issues for WIN with new Lithium Firmware headers.
Also removed dependency on htt.h from header files, which may need to
add explicit dependency on htt.h in .c files.
Change-Id: Ia5027963837e645bc3f81a3db98c2ea06789aea8
CRs-Fixed: 1061096
Propagation from qcacld-2.0 to qcacmn.
Add support to get per chain rssi from fw through the
already existing WMI command WMI_REQUEST_STATS_CMDID
and then store it in the station_info structure defined
by cfg80211.
Change-Id: Id50c96dd322b5ca4db34cf2df901730d8b103251
CRs-Fixed: 1005367
Add CPU cluster management functionality. On low throughput,
the system works as normal. On high throughput, the driver gets
control of WLAN datapath interrupts and disperses them on different
CPUs and pegs them to maximize performance. Add init code, topology
table construction and hotplugin notifiers.
Change-Id: I247edb57003797ed6a04f70d15067072e22c2396
CRs-Fixed: 1065477
In current codeflow, we are maintaining the length of the TSO segments
belonging to one jumbo packet inside tso_info, which is common for
all the segments of one jumbo packet. This works if the length of
the segments (frag[1]) is the same. In case it is not, it ends up
assigning incorrect length to all the segments. This is resulting
GMS login failure.
Fix issue by maintaining the total length of the segment in the
qdf_tso_seg_t structure.
Re-factor code for easy readability
Add TSO_DEBUG prints which can be enabled (compile time) to debug
TSO issues
Change-Id: Ifb5a0f1493224c66c3acc394e47a74b2dd84bbc9
CRs-Fixed: 1062556
Decrement qdf_mem_list.count when removing elements to avoid
assert when destroying the list.
Change-Id: I0d0989f3a9009184b898b8b27517e6d12fa3dc97
CRs-Fixed: 1063093
Send HT/VHT CAPs IE to firmware per band. This will allow certain
features like LDPC to be configured per band.
Change-Id: I21c83af984f9be3ade46121ef148b52568c3ad0f
CRs-Fixed: 1059454
Propagation from qcacld-2.0 to qcacmn.
Add NULL check for HIF device structure in hif_enable_func before
dereferencing it.
Change-Id: I535d5138c2247b4b9acdf63211f30a57a1d3116f
CRs-Fixed: 1055684
Propagation from qcacld-2.0 to qcacmn.
Add sanity check to avoid NULL pointer dereferencing of tx
completion handler callback in hif_send_buffer_cleanup_on_pipe.
Change-Id: If38b4b7cdd1154d8272e5150c6653f90df8f4b5e
CRs-Fixed: 1057490
Currently ani_global.h is included in qca-cmn,
This change removes ani_global.h and there are
corresponding changes in Driver
Change-Id: I4c1cf70e8eb1f4391a25783a560c02a43c483054
CRs-Fixed: 1012452
As part of MBO(MultiBand Operations), host driver need to supply
the default scan IEs to firmware at wifi init time using existing
VDEV SET IE command. FW uses these Scan IE's in subsequent scans
.i.e. FW initiated Probe Requests.
This Fix updates the vdev_ie_info_param struct with ie_source.
ie_source will be set with zero for VDEV SET IE commands from
host driver
Change-Id: Ie2e87da8aa94b76aef431e25d9974b8fed63eba9
CRs-Fixed: 1039969
