TDLS VHT channel width information can be read from session
entry, but the value needs to be readjusted as per our
protocol stack implementation.
Add changes in the host driver to fix TDLS VHT channel width
information.
Change-Id: I8797b298e46213ace014557697a449ea4ae560b6
CRs-fixed: 1044693
In AP+AP scenario, duplicate STA entry triggers assert at
firmware during the create peer.
Remove the stale entry of the sta before adding
a new entry in session.
Change-Id: I9837160b42f72aa53872a0c2814058c0576289d4
CRs-Fixed: 1043189
For P2P listen offload feature, add vendor ID information in wiphy
vendor command structure, also add missing data length assignment when
sending WMI command to FW.
Change-Id: Ia889d794cae156814056aeefdfdf339429bf1401
CRs-fixed: 1040310
Update target type definitions in fw common file. This change
set will fix the mismatch between host driver and FW.
Change-Id: I570fd928e720e9f7ce982fe87da383669f8a9105
CRs-Fixed: 1044264
Currently hdd_init_qdf_ctx() calls cds_get_context() to retrieve the
QDF Device context, and then writes into the context without
validating the pointer. Add logic to validate the pointer before
using it.
Change-Id: Ib427d1348b3ff5b13689e24f69e4606f23ea767c
CRs-Fixed: 1042043
Currently the User Priority (UP) returned by hdd_wmm_classify_pkt() is
used without any checks by hdd_get_queue_index() to lookup the Access
Category (AC) in the mapping table hdd_linux_up_to_ac_map[]. Although
the UP returned by hdd_wmm_classify_pkt() should be within the valid
range, for safety add an explicit check to prevent an overread of the
table.
Change-Id: Iacd8d97bcc7a3939cdb2469f6830adc2ffc24765
CRs-Fixed: 1041989
Currently the authtype is not getting updated properly in case
of wpa2psk security mode, this change will update the correct
auth type
Change-Id: I11d15457b375ed2803420cfd08070a7bbc181029
CRs-Fixed: 1044021
Enable LRO, NAPI and Fastpath.
Moving datapath features together at one place in INI.
Change-Id: I3996ce76a0fa386b5cb7eeb00548db9dea54d390
CRs-Fixed: 1035499
Propagation from qcacld-2.0 to qcacld-3.0
Adding connect_ie interface for Roaming offload.
Change-Id: I8263688aec3895af57555a5db14d4459848c0cc5
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0
Add WMI command to set GPIO numbers that are used to wakeup host
and wakeup target.
Changes to disable dynamic bandwidth RTS.
Add swol_assist_enable field to WMI extwow_set_app_type1_params
cmd to enable IoT mode WMI enums for CCK and OFDM max tx rates.
Change-Id: I26873873d7a355c179babaa7cc56e187e9771c92
CRs-fixed: 865207
In case of legacy/old platform, extended caps are not provided and
number of supported hw modes is expected to come as zero. Due to
bug in a code, driver is going ahead and try to allocated memory
with size of 0 bytes which is causing the assert.
Change-Id: I37adf5ba4e1b1100af06da0a37466a5531be5880
CRs-Fixed: 1040063
qcacld-2.0 to qcacld-3.0 propagation
Teardown all TDLS links before second VDEV comes up
Change-Id: I0561dcef8f9a3143f420c196d805adecadf0ab6c
CRs-Fixed: 951482
Instead of using separate lock to protect dfs_radar_found,
change variable itself to atomic.
Change-Id: If95e2ce5a0c837f36a92673312ea4d2fc7b96abe
CRs-Fixed: 1039447
In function csr_roam_join_handle_profile, add NULL pointer check for
"result" after call to csr_roam_select_bss rather than before
csr_roam_join_handle_profile, since it is called for BSS role as well.
Change-Id: I800891fd66d5c851537968515e43eadbe38a2ae8
CRs-Fixed: 1038237
Add NULL pointer check for "result" after call to csr_roam_select_bss.
This function can return a NULL value for variable "result", which is
later dereference in the function csr_roam_join_handle_profile.
Change-Id: I5e1f017de49301a14b899692b888f7694e979bf1
CRs-Fixed: 1027725
Container_of returns invalid ol_ctx pointer which leads to a null
pointer of qdf_dev. Fix this by directly request qdf_dev pointer
from cds.
Change-Id: I08910bb798b7992d550c9e061eed04a9b6f140d1
CRs-Fixed: 1033518
Fix the occupied channel list that is being passed from CSR to
WMA to WMI to firmware.There is a conversion happening in
WMA from channel number to frequency which is the root of the
issue.
CRs-Fixed: 1039020
Change-Id: I8e10df6dd4d09b12ff700ab865f6722f4fbfaf8d
Bus suspend/resume log messages are logged with info log
level which is by default not logged in kernel log buffer.
Increase bus suspend/resume log level to error such that
this critical log message is logged in kernel message.
Once wlan suspend/resume feature becomes more stable this
log message can be reduced back to info log level.
Change-Id: Ic78900d5b111637d4d8d1b26e18fa298fbbd893f
CRs-Fixed: 1041335
Currently the HDD code uses a variety of logging APIs. In
qcacld-3.0 HDD should converge on a unified set of logging APIs.
Update wlan_hdd_power.c to use the unified set of APIs.
Change-Id: Iba049d8734436c916efce4d3c1fa2c55ac09c333
CRs-Fixed: 937685
Currently the HDD code uses a variety of logging APIs. In
qcacld-3.0 HDD should converge on a unified set of logging APIs.
Update wlan_hdd_ocb.c to use the unified set of APIs.
Change-Id: I7ec58632a781024fedba46ff25baa873ac52bd9a
CRs-Fixed: 937672
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 7 set the HDD_DISALLOW_LEGACY_HDDLOG flag so that no future
changes can introduce new instances of legacy logging.
Change-Id: Ia76d147a57bbc2f1361f8574d226447d0e4c8408
CRs-Fixed: 937661
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 6 update the following functions:
__wlan_hdd_cfg80211_stop_ap()
__wlan_hdd_cfg80211_start_ap()
__wlan_hdd_cfg80211_change_beacon()
Change-Id: I173579cb7ba6fc1baa7e6667f06bf642e961b5bb
CRs-Fixed: 937661
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 5 update the following functions:
__iw_softap_stopbss()
hdd_softap_get_sta_info()
__iw_softap_get_sta_info()
__iw_set_ap_genie()
__iw_get_softap_linkspeed()
hdd_init_ap_mode()
hdd_wlan_create_ap_dev()
hdd_register_hostapd()
hdd_unregister_hostapd()
wlan_hdd_set_channel()
wlan_hdd_add_ie()
wlan_hdd_add_hostapd_conf_vsie()
wlan_hdd_add_extra_ie()
wlan_hdd_cfg80211_alloc_new_beacon()
wlan_hdd_cfg80211_update_apies()
wlan_hdd_config_acs()
wlan_hdd_setup_driver_overrides()
wlan_hdd_cfg80211_start_bss()
Change-Id: Ibaf0dbb2af0928bf4dce5a475df7e536d85d1451
CRs-Fixed: 937661
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 4 update the following functions:
__iw_softap_getparam()
__iw_softap_modify_acl()
__iw_softap_set_max_tx_power()
__iw_softap_set_tx_power()
__iw_softap_getassoc_stamacaddr()
__iw_softap_disassoc_sta()
wlan_hdd_set_force_acs_ch_range()
__iw_softap_get_channel_list()
__iw_get_genie()
__iw_get_wpspbc_probe_req_ies()
__iw_set_auth_hostap()
__iw_set_ap_encodeext()
__iw_softap_setwpsie()
Change-Id: If2388fbdaf5988bd1864443f58594098c44bf837
CRs-Fixed: 937661
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 3 update the following functions:
__iw_softap_setparam()
__iw_softap_get_three()
Change-Id: I5db86f54bcc978d7935873423fa1e91bc83d7a2e
CRs-Fixed: 937661
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 2 update the following functions:
hdd_softap_unpack_ie()
hdd_softap_set_channel_change()
__iw_softap_set_ini_cfg()
__iw_softap_get_ini_cfg()
__iw_softap_set_two_ints_getnone()
Change-Id: Ia755a63c7154253a02b395fa60f8d3ef82628bba
CRs-Fixed: 937661
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 1 update the following functions:
hdd_hostapd_channel_allow_suspend()
hdd_hostapd_channel_prevent_suspend()
__hdd_hostapd_open()
__hdd_hostapd_stop()
__hdd_hostapd_uninit()
hdd_set_sap_ht2040_mode()
hdd_hostapd_inactivity_timer_cb()
hdd_clear_all_sta()
hdd_stop_bss_link()
hdd_issue_stored_joinreq()
hdd_send_radar_event()
hdd_hostapd_sap_event_cb()
Change-Id: I5ba28609a7859472bfe08517260364f286f068f4
CRs-Fixed: 937661
qcacld-2.0 to qcacld-3.0 propagation.
oem data request len size should be of 4 byte instead of
1 byte.
Add changes to correct len size in oem data structure across the
layers.
Change-Id: I9b377420c50ff1160964f94be5eaa0072df0f63d
CRs-Fixed: 1013488
Propagation from qcacld-2.0 to qcacld-3.0.
WMI service flag for flash read / write support.
Change-Id: I896b4b53f596df96ec7f023b9301f6a695cd325a
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
WMI pdev params to specify retry limit for control frames, and
propagation delay.
Change-Id: I9662d4cfee0910706486ae1709749aacd938fa3c
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
WMI interface change for DBS roaming and CSA roaming.
Change-Id: Ia483de75c1ea7caa6526aaddd15886fe6a4404bd
CRs-fixed: 865207
