In target_if_ftm_process_utf_event is derived & dereferenced
with out a NULL check. Add a NULL check for wmi_handle before it is
dereferenced.
Change-Id: Id3c1ae4df9aa7b0cfc12fbf9288bec2ae72c6de6
CRs-Fixed: 2305506
In target_if_tdls_update_fw_state, target_if_tdls_set_offchan_mode,
& target_if_tdls_set_uapsd wmi_handle is derived & dereferenced
with out a NULL check. Add a NULL check for wmi_handle before it is
dereferenced.
Change-Id: If741f69773a712cebcd1be889ca09d01eee97fae
CRs-Fixed: 2305520
In target_if_pno_start, target_if_pno_stop,
tgt_reg_chan_list_update_handler, tgt_reg_11d_new_cc_handler &
tgt_reg_ch_avoid_event_handler wmi_handle is derived & dereferenced
with out a NULL check. Add a NULL check for wmi_handle before it is
dereferenced.
Change-Id: I4b4afa5bb74a2c97d921af2672eb285f7c34062a
CRs-Fixed: 2305512
The Firmware will switch to default US regdomain
after SSR.
After SSR we need to keep the old country code,
so skip the chan list update firmware event duing SSR.
Change-Id: I8735abef67e072f60961aab655a016348dc9d4a0
CRs-Fixed: 2304303
1. Service ready ext includes a parameter for max
BSSID indicator.
2. Beacon template includes MBSSID IE offset.
3. Vdev create and up cmds include more parameters.
Change-Id: I71214eacdaa886725b7ea8f61db3a743ba6597e9
CRs-Fixed: 2306638
Add FTM flags to enable/disable FTM and enable NL80211 only, enable TX99
only or both.
Change-Id: I18bbbadd65d23221dc4d739e05235f4d81c12043
CRs-Fixed: 2240572
Reduce log level for few prints to debug to avoid flooding
of prints to console.
Change-Id: I514585cc87d51ead15fb1f40d45f62023628d9bb
CRs-Fixed: 2296839
Add per module logging macros without function/line info
to avoid adding function/line info where it is not required.
Change-Id: I34ba6f6485f9b506264daf4e116052d2858bed40
CRs-Fixed: 2278876
Add new fields such as agc_total_gain, sscan_gainchange
to the Spectral SAMP message.
CRs-Fixed: 2291499
Change-Id: Ia6a9fd742c2ee98fd9d7102f0d8c66dcd22a1614
Clean up spectral, tif and umac component prints by correcting trace
levels for regularly occurring prints and removing newlines from
converged print APIs since qdf_trace_msg appends them by default.
Change-Id: Ib10f1b1c54ecbcb9f4076be7c2c4708359d488e0
CRs-Fixed: 2243843
TWT requester/responder capability is reported by FW in service bitmap.
Based on this support set soc's extcap feature bit. This is used while
adding extended capabilities IE to set TWT REQ/RSP bits in IE.
Change-Id: I304e9fa4dc32bd3c2f47901bc34438cb188d138a
CRs-Fixed: 2290026
Currently if ini config dfsPhyerrFilterOffload is set zero on Rome
attached Platform, wlan interface will fail when do interface up.
This makes no sense, since ini configure can be set to zero, also
in this case host can handle the phyerr event instead.
Remove this check in target_if_reg_phyerr_events_dfs2.
Change-Id: Ie33072c8d40925eb550bd820462fc9ab93f0e0c0
CRs-Fixed: 2286382
ba_window_size_valid and ba_window size support is missing
while sending wmi_peer_reorder_queue_setup. This is needed
for handing 256 BA which is not FW default.
Change-Id: I3218921c48c0f82225b7992076e73ac0acf7bd11
CRs-fixed: 2285423
Excessive logging in target_if has been identified as the root cause of
a watchdog timeout. Reduce target_if logging in normal operation paths
to debug level to avoid excessive CPU use.
Change-Id: If384474270bb4b860100b98e5eea81d54b7c2184
CRs-Fixed: 2286630
For the case in DBS, the psoc and pdev is one-to-one mapping,
but firmware will send per pdev_id information to host according
to the radio being tested, add a backup query to SOC_ID if the
pdev_id passed along from utf_event is invalid/unsupported to
work around this case.
Change-Id: I67645da67a968b66b720f211a9a0815a4cc22845
CRs-fixed: 2286291
Map all enter/exit log macros to enter/exit QDF TRACE macro
to provide option to compile out enter/exit logs if required
Change-Id: I913ef0fb2486fde6b2ec4dfe8465884ca4d66ce4
CRs-Fixed: 2274857
target_if_dbr_replenish_ring should check the mapped physical address for
agreed byte boundary alignment. Fix the logic in the check.
Change-Id: I05058ae69df8a2ee2caf9ce1295c0a2e9026511c
CRs-Fixed: 2283230
In current implementation, wait_queue is used for waiting on WMI ready
event, it is now changed to event mechanism
Change-Id: I08b4f088874b7c63e20b129f14dbac01851496e5
CRs-Fixed: 2276900
Map all module level log APIs to per-level log APIs
to compile out specific log level if required.
Change-Id: I4072b6740cb43200fd95c40943b66e1d5f8f1847
CRs-Fixed: 2266719
Move few common dp_ol_if_ops functions to target_if layer as part of
DP-CP interaction convergence
Change-Id: I9ad740af687f550f64ef8f81919159b73204e7b8
CRs-Fixed: 2243694
In the scan channel list, host sends both 2.4GHz and 4.9GHz channels to FW
because there are ieee channels which have same value in 2.4 GHz and 5GHz
bands. Example: channel 1 is 2.412 in 2.4GHz and 4.942 in 5 GHz.
When converting a channel to freq, the host uses low/high 2GHz and 5GHz
frequency ranges. For a partial-offload 5GHz pdev, both low/high 2.4 GHz
and 5 GHz frequencies are set and hence 4.9 GHz channel is converted to
2.4GHz frequency.
To fix the above issue, based on the wireless modes remove either low/high
2.4 GHz or low/high 5 GHz frequency based on the wireless modes.
Change-Id: I1fb0a56c70d1dc0ffc2731da3f25c910af46bb41
CRs-Fixed: 2239771
User expects signal strength in dBm. But for GET_RSSI IOCTL
driver is sending a relative value, not in dBm unit.
While processing GET_RSSI IOCTL, send signal strength in
dBm unit, as the user expects.
Change-Id: Id8b248f0be558e9b91f3e4675cb7b58cd6b3e940
CRs-Fixed: 2258559
After stop_scan call, Spectral priority is being disabled.
Do not change the value of any spectral parameter unless the command is
configure_spectral.
Change-Id: I25d3458cd49e25533270f89df9f8f29a4b7da16d
CRs-Fixed: 2259952
1. Add support upto 2048 buffers in the ring
2. Add API to print current ring status per module per pdev
3. Start module ID numbering from 0
Change-Id: I7954007c6c486877ffb2ab91724885af2fbaab8c
CRs-Fixed: 2263968
Clean up excessive logging from target if and QDF to avoid spamming
kernel log buffers.
Change-Id: Ib81d6bb68bae9d5c477755b31dc20e10663147d5
CRs-Fixed: 2259283
As per the current design we are trying to take a ref
for the vdev even when there are no active vdev.
Fix this by adding a NULL check.
CRs-Fixed: 2262983
Change-Id: Iac62c9d0e1138c3d150a179546ad7793ff61e3db
As return of wlan_psoc_get_qdf_dev(), qdf_dev may be
NULL. Add null check in case referencing null.
Change-Id: I7e9bd54e5f4b5260f664bdd4ccee0e4267e2b81e
CRs-Fixed: 2247327
Add spectral scan feature flag which can be
used to control the feature through build options.
Change-Id: Ic56416fc99b521174cccb3af27cc841bfb2ad27d
CRs-Fixed: 2244334
Initialize local array reg_cap in init_deinit_populate_phy_reg_cap
to avoid accessing uninitialized fields in the array.
Change-Id: I9afb8d47cc12b3d1626aa64a52f9583d45df5f34
CRs-Fixed: 2232822
Add support for ndp schedule update event and provide channel information
in ndp confirm event.
Change-Id: Ic2c073dd4f220627cc2bd1a2d52d858136b6b450
CRs-Fixed: 2180310
Fix the following ERROR-level issues reported by checkpatch:
ERROR: space prohibited after that open parenthesis '('
ERROR: space required before the open parenthesis '('
Change-Id: I221b7bcaad4116f759beb4a51f196dd0e749d764
CRs-Fixed: 2241592
Address the following issue in the spectral folder:
CHECK: 'transfered' may be misspelled - perhaps 'transferred'?
Change-Id: I23b710b4462f3ecc6f14fab54689a1064a716bf7
CRs-Fixed: 2241583
Setting of any spectral parameter after 'wifi load',
before doing a get operation, is not getting affected.
This is because the current implementation marks the
spectral cache valid only during the read operation.
To fix this, mark the cache valid after write as well.
Change-Id: I53df704e60e29cab7ce7afdd49b917e3482479e5
CRs-Fixed: 2238814
Spectral scan period is not in terms of tclk periods for
generation 3 Spectral HW. It is directly in micro seconds.
Default value is 224 us. Driver needs to use 224 us as
default value. Application needs to display the unit as
tclk period till generation II and micro second for
generation III. For this driver will be sharing the
Spectral HW generation info to application as part of
the capability exchange.
CRs-Fixed: 2225740
Change-Id: Iaeda8ebb77c2a39824b5f919e8578ff4d56c1aa5
Add changes to support get congestion stats(arp stats) from
within cp_stats component.
Change-Id: Ic3b2f020c0169c9113c1b40738f782cbb3b8f6c5
CRs-Fixed: 2222781
Replace functions with ucfg as prefix in init_deinit_ucfg file with lmac as
prefix
Change-Id: I90d77dd5ddae4854ea68eeb67dc1b4fc356c2fe3
CRs-Fixed: 2182449
