is_flush_rq() is called from bt_iter()/bt_tags_iter(), and runs the
following check:
hctx->fq->flush_rq == req
but the passed hctx from bt_iter()/bt_tags_iter() may be NULL because:
1) memory re-order in blk_mq_rq_ctx_init():
rq->mq_hctx = data->hctx;
...
refcount_set(&rq->ref, 1);
OR
2) tag re-use and ->rqs[] isn't updated with new request.
Fix the issue by re-writing is_flush_rq() as:
return rq->end_io == flush_end_io;
which turns out simpler to follow and immune to data race since we have
ordered WRITE rq->end_io and refcount_set(&rq->ref, 1).
Fixes: 2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in
blk_mq_tagset_busy_iter")
Cc: "Blank-Burian, Markus, Dr." <blankburian@uni-muenster.de>
Cc: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Bug: 197804811
Change-Id: Iba551d228e5cd96749c13f4c19e13687b0e89196
(cherry picked from commit a9ed27a764156929efe714033edb3e9023c5f321)
[Pradeep: Resolved conflicts in block/blk.h]
Signed-off-by: Pradeep P V K <pragalla@codeaurora.org>
Before we free request queue, clearing flush request reference in
tags->rqs[], so that potential UAF can be avoided.
Based on one patch written by David Jeffery.
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Bug: 197804811
Change-Id: I9600626e807a4eed546c21be808fabed2a9db9b1
(cherry picked from commit 364b61818f65045479e42e76ed8dd6f051778280)
[ refactored to avoid breaking KMI ]
Signed-off-by: Pradeep P V K <pragalla@codeaurora.org>
Signed-off-by: Todd Kjos <tkjos@google.com>
refcount_inc_not_zero() in bt_tags_iter() still may read one freed
request.
Fix the issue by the following approach:
1) hold a per-tags spinlock when reading ->rqs[tag] and calling
refcount_inc_not_zero in bt_tags_iter()
2) clearing stale request referred via ->rqs[tag] before freeing
request pool, the per-tags spinlock is held for clearing stale
->rq[tag]
So after we cleared stale requests, bt_tags_iter() won't observe
freed request any more, also the clearing will wait for pending
request reference.
The idea of clearing ->rqs[] is borrowed from John Garry's previous
patch and one recent David's patch.
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Bug: 197804811
Change-Id: If49478d7b05d3f5b0a26966ddf9ae764cf2fb6b0
(cherry picked from commit bd63141d585bef14f4caf111f6d0e27fe2300ec6)
[ refactored to avoid breaking KMI ]
Signed-off-by: Pradeep P V K <pragalla@codeaurora.org>
Signed-off-by: Todd Kjos <tkjos@google.com>
Grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter(), and
this way will prevent the request from being re-used when ->fn is
running. The approach is same as what we do during handling timeout.
Fix request use-after-free(UAF) related with completion race or queue
releasing:
- If one rq is referred before rq->q is frozen, then queue won't be
frozen before the request is released during iteration.
- If one rq is referred after rq->q is frozen, refcount_inc_not_zero()
will return false, and we won't iterate over this request.
However, still one request UAF not covered: refcount_inc_not_zero() may
read one freed request, and it will be handled in next patch.
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Bug: 197804811
Change-Id: Ib80fe8b9f1d76d2489e41f3365fbd12d68a3b097
(cherry picked from commit 2e315dc07df009c3e29d6926871f62a30cfae394)
[Pradeep: Resolved conflicts in block/blk-mq-tag.c]
Signed-off-by: Pradeep P V K <pragalla@codeaurora.org>
Set CONFIG_DEFAULT_MMAP_MIN_ADDR=32768 to conform with
existing CTS test (which had an issue that prevented
reliable detection of this setting).
Bug: 197914473
Signed-off-by: Todd Kjos <tkjos@google.com>
Change-Id: I5a86a7b11d32adf8689657e4559c1d870a5562c4
This brings the android11-5.4 branch up to the 5.4.134 LTS release
level.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ide47bba8ef66f14a0599aa455c77ec8a7158f600
Explicitly set what is visible to userspace
Bug: 196046570
Test: passed netd test suites
Signed-off-by: Todd Kjos <tkjos@google.com>
Change-Id: Iacec0ef8ae290e01f1b60508d8abcd40a3653c83
Initialize message buffer for quota2_log to avoid sending
random data.
Bug: 196046570
Test: passed netd test suites
Fixes: 10cda83af9 ("ANDROID: netfilter: xt_quota2: adding the
original quota2 from xtables-addons")
Signed-off-by: Todd Kjos <tkjos@google.com>
Change-Id: Ic9f34aaa2593809b375fc649b74567190c99dc62
Make sure string only contains the characters specified by userspace.
Fix cherry-picked from xtables-extensions project
Signed-off-by: Sam Liddicott <sam@liddicott.com>
Bug: 196046570
Test: passed netd test suites
Fixes: 10cda83af9 ("ANDROID: netfilter: xt_quota2: adding the
original quota2 from xtables-addons")
Signed-off-by: Todd Kjos <tkjos@google.com>
(cherry picked from https://git.code.sf.net/p/xtables-addons/xtables-addons
bc2bcc383c70b293bd816c29523a952ca8736fb5)
Change-Id: I965448564906e5fbf0fe6d6414f44d9e257ea195
No upstream commit, this is a fix to a stable 5.4 specific backport.
The intention of backport commit cac68d12c5 ("io_uring: grab ->fs as part
of async offload") as found in the stable 5.4 tree was to make
io_sq_wq_submit_work() to switch the workqueue task's ->fs over to the
submitting task's one during the IO operation.
However, due to a small logic error, this change turned out to not have any
actual effect. From a high level, the relevant code in
io_sq_wq_submit_work() looks like
old_fs_struct = current->fs;
do {
...
if (req->fs != current->fs && current->fs != old_fs_struct) {
task_lock(current);
if (req->fs)
current->fs = req->fs;
else
current->fs = old_fs_struct;
task_unlock(current);
}
...
} while (req);
The if condition is supposed to cover the case that current->fs doesn't
match what's needed for processing the request, but observe how it fails
to ever evaluate to true due to the second clause:
current->fs != old_fs_struct will be false in the first iteration as per
the initialization of old_fs_struct and because this prevents current->fs
from getting replaced, the same follows inductively for all subsequent
iterations.
Fix said if condition such that
- if req->fs is set and doesn't match current->fs, the latter will be
switched to the former
- or if req->fs is unset, the switch back to the initial old_fs_struct
will be made, if necessary.
While at it, also correct the condition for the ->fs related cleanup right
before the return of io_sq_wq_submit_work(): currently, old_fs_struct is
restored only if it's non-NULL. It is always non-NULL though and thus, the
if-condition is rendundant. Supposedly, the motivation had been to optimize
and avoid switching current->fs back to the initial old_fs_struct in case
it is found to have the desired value already. Make it so.
Cc: stable@vger.kernel.org # v5.4
Fixes: cac68d12c5 ("io_uring: grab ->fs as part of async offload")
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit c4a23c852e)
Bug: 196948385
Signed-off-by: Alistair Delva <adelva@google.com>
Change-Id: Id4e7757ef2beaf58ac578bd9f09184085b3d0f5b
commit 77ec462536a13d4b428a1eead725c4818a49f0b1 upstream.
(The upstream patch was not marked as fixed but this can fix
Fixes: 28b1a824a4 ("arm64: vdso: Substitute gettimeofday() with C implementation")
sysbench memory comparison:
- Before: 3072.00 MB transferred (2601.11 MB/sec)
- After: 3072.00 MB transferred (3217.86 MB/sec)
)
We can avoid the expensive ISB instruction after reading the counter in
the vDSO gettime functions by creating a fake address hazard against a
dummy stack read, just like we do inside the kernel.
Bug: 195968646
Fixes: 28b1a824a4 ("arm64: vdso: Substitute gettimeofday() with C implementation")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210318170738.7756-5-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
CC: stable@vger.kernel.org
(cherry picked from commit 77ec462536a13d4b428a1eead725c4818a49f0b1)
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Change-Id: I891873626c27060e7ead724754096a7c5f59e4e6
Android does not use these drivers and enabling them causes additional
and unwanted epoll wakeups due to uevents at suspend/resume time.
Bug: 195607946
Signed-off-by: Alistair Delva <adelva@google.com>
Change-Id: Id3d58dc695c0cd6d2a65503a421de1afebd83784
No new symbols added that are not already in the .xml file.
Bug: 194979426
Change-Id: I5fad2df65c189bf0afbefeff2aeab19c500552dd
Signed-off-by: Nobutaka Matsuo <matsuo.nobu@fcnt.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The page used to contain the fuse_dentry_canonical_path to be handled in
fuse_dev_do_write is allocated using __get_free_pages(GFP_KERNEL).
The returned page may contain undefined data, that by chance may be
considered as a valid path name that is not in the cache. In that case,
if the FUSE daemon mistakenly doesn't fill the canonical path buffer,
the FUSE driver may fall into two blocking
request_wait_answer(fuse_dev_write->kern_path->fuse_lookup_name)
causing a deadlock condition.
The stack is as follows：
find S 0 20511 20117 0x00000000
Call trace:
[<ffffff8008085e78>] __switch_to+0xb8/0xd4
[<ffffff8008a0cac4>] __schedule+0x458/0x714
[<ffffff8008a0ce0c>] schedule+0x8c/0xa8
[<ffffff800833865c>] request_wait_answer+0x74/0x220
[<ffffff8008339f70>] __fuse_request_send+0x8c/0xa0
[<ffffff8008339fe4>] fuse_request_send+0x60/0x6c
[<ffffff800833c1a8>] fuse_dentry_canonical_path+0xb8/0x104
[<ffffff800820b14c>] do_sys_open+0x1b4/0x260
[<ffffff800820b27c>] SyS_openat+0x3c/0x4c
[<ffffff8008083540>] el0_svc_naked+0x34/0x38
mount.ntfs-3g S 0 5845 1 0x00000000
Call trace:
[<ffffff8008085e78>] __switch_to+0xb8/0xd4
[<ffffff8008a0cac4>] __schedule+0x458/0x714
[<ffffff8008a0ce0c>] schedule+0x8c/0xa8
[<ffffff800833865c>] request_wait_answer+0x74/0x220
[<ffffff8008339f70>] __fuse_request_send+0x8c/0xa0
[<ffffff8008339fe4>] fuse_request_send+0x60/0x6c
[<ffffff800833bdb0>] fuse_simple_request+0x128/0x16c
[<ffffff800833dddc>] fuse_lookup_name+0x104/0x1b0
[<ffffff800833dee4>] fuse_lookup+0x5c/0x11c
[<ffffff800821861c>] lookup_slow+0xfc/0x174
[<ffffff800821b474>] walk_component+0xf0/0x290
[<ffffff800821bbac>] path_lookupat+0xa0/0x128
[<ffffff800821c7f4>] filename_lookup+0x84/0x124
[<ffffff800821c8d8>] kern_path+0x44/0x54
[<ffffff800833b0c8>] fuse_dev_do_write+0x828/0xa0c
[<ffffff800833b610>] fuse_dev_write+0x90/0xb4
[<ffffff800820b770>] do_iter_readv_writev+0xf4/0x13c
[<ffffff800820cc88>] do_readv_writev+0xec/0x220
[<ffffff800820d05c>] vfs_writev+0x60/0x74
[<ffffff800820d0ec>] do_writev+0x7c/0x100
[<ffffff800820e348>] SyS_writev+0x38/0x48
[<ffffff8008083540>] el0_svc_naked+0x34/0x38
Fix by ensuring that the page allocated for the canonical path is zeroed.
Bug: 194856119
Fixes: 24ab59f6bb ("ANDROID: fuse: Add support for d_canonical_path")
Signed-off-by: Biao Li <libiao@allwinnertech.com>
Signed-off-by: Shuosheng Huang <huangshuosheng@allwinnertech.com>
Signed-off-by: Alessio Balsini <balsini@google.com>
Change-Id: I400815dc1049d90c308f5cf87ce60de97ff82131
struct hid_device was not being tracked as a "stable" symbol in the
past, but that looks to change with some future abi requirements. So
add needed padding now, to ensure that we can support this over the
long-term.
This does not change the existing api at all as this symbol was not
supported yet.
Bug: 151154716
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I8c3064fb7a19006a29dabbaf25c9ed1737f62e75
-----BEGIN PGP SIGNATURE-----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=3pL6
-----END PGP SIGNATURE-----
Merge 5.4.134 into android11-5.4-lts
Changes in 5.4.134
KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio
KVM: x86: Use guest MAXPHYADDR from CPUID.0x8000_0008 iff TDP is enabled
KVM: X86: Disable hardware breakpoints unconditionally before kvm_x86->run()
scsi: core: Fix bad pointer dereference when ehandler kthread is invalid
tracing: Do not reference char * as a string in histograms
cgroup: verify that source is a string
fbmem: Do not delete the mode that is still in use
net: moxa: Use devm_platform_get_and_ioremap_resource()
dmaengine: fsl-qdma: check dma_set_mask return value
srcu: Fix broken node geometry after early ssp init
tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero
misc/libmasm/module: Fix two use after free in ibmasm_init_one
misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge
iio: gyro: fxa21002c: Balance runtime pm + use pm_runtime_resume_and_get().
iio: magn: bmc150: Balance runtime pm + use pm_runtime_resume_and_get()
ALSA: usx2y: Don't call free_pages_exact() with NULL address
Revert "ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro"
w1: ds2438: fixing bug that would always get page0
scsi: hisi_sas: Propagate errors in interrupt_init_v1_hw()
scsi: lpfc: Fix "Unexpected timeout" error in direct attach topology
scsi: lpfc: Fix crash when lpfc_sli4_hba_setup() fails to initialize the SGLs
scsi: core: Cap scsi_host cmd_per_lun at can_queue
ALSA: ac97: fix PM reference leak in ac97_bus_remove()
tty: serial: 8250: serial_cs: Fix a memory leak in error handling path
scsi: scsi_dh_alua: Check for negative result value
fs/jfs: Fix missing error code in lmLogInit()
scsi: megaraid_sas: Fix resource leak in case of probe failure
scsi: megaraid_sas: Early detection of VD deletion through RaidMap update
scsi: megaraid_sas: Handle missing interrupts while re-enabling IRQs
scsi: iscsi: Add iscsi_cls_conn refcount helpers
scsi: iscsi: Fix conn use after free during resets
scsi: iscsi: Fix shost->max_id use
scsi: qedi: Fix null ref during abort handling
mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLE
mfd: cpcap: Fix cpcap dmamask not set warnings
ASoC: img: Fix PM reference leak in img_i2s_in_probe()
serial: tty: uartlite: fix console setup
s390/sclp_vt220: fix console name to match device
selftests: timers: rtcpie: skip test if default RTC device does not exist
ALSA: sb: Fix potential double-free of CSP mixer elements
powerpc/ps3: Add dma_mask to ps3_dma_region
iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
gpio: zynq: Check return value of pm_runtime_get_sync
ALSA: ppc: fix error return code in snd_pmac_probe()
selftests/powerpc: Fix "no_handler" EBB selftest
gpio: pca953x: Add support for the On Semi pca9655
ASoC: soc-core: Fix the error return code in snd_soc_of_parse_audio_routing()
s390/processor: always inline stap() and __load_psw_mask()
s390/ipl_parm: fix program check new psw handling
s390/mem_detect: fix diag260() program check new psw handling
s390/mem_detect: fix tprot() program check new psw handling
Input: hideep - fix the uninitialized use in hideep_nvm_unlock()
ALSA: bebob: add support for ToneWeal FW66
ALSA: usb-audio: scarlett2: Fix 18i8 Gen 2 PCM Input count
ALSA: usb-audio: scarlett2: Fix data_mutex lock
ALSA: usb-audio: scarlett2: Fix scarlett2_*_ctl_put() return values
usb: gadget: f_hid: fix endianness issue with descriptors
usb: gadget: hid: fix error return code in hid_bind()
powerpc/boot: Fixup device-tree on little endian
ASoC: Intel: kbl_da7219_max98357a: shrink platform_id below 20 characters
backlight: lm3630a: Fix return code of .update_status() callback
ALSA: hda: Add IRQ check for platform_get_irq()
ALSA: usb-audio: scarlett2: Fix 6i6 Gen 2 line out descriptions
staging: rtl8723bs: fix macro value for 2.4Ghz only device
intel_th: Wait until port is in reset before programming it
i2c: core: Disable client irq on reboot/shutdown
lib/decompress_unlz4.c: correctly handle zero-padding around initrds.
power: supply: sc27xx: Add missing MODULE_DEVICE_TABLE
power: supply: sc2731_charger: Add missing MODULE_DEVICE_TABLE
pwm: spear: Don't modify HW state in .remove callback
power: supply: ab8500: Avoid NULL pointers
power: supply: max17042: Do not enforce (incorrect) interrupt trigger type
power: reset: gpio-poweroff: add missing MODULE_DEVICE_TABLE
ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1
PCI/P2PDMA: Avoid pci_get_slot(), which may sleep
watchdog: Fix possible use-after-free in wdt_startup()
watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()
watchdog: Fix possible use-after-free by calling del_timer_sync()
watchdog: imx_sc_wdt: fix pretimeout
watchdog: iTCO_wdt: Account for rebooting on second timeout
x86/fpu: Return proper error codes from user access functions
PCI: tegra: Add missing MODULE_DEVICE_TABLE
orangefs: fix orangefs df output.
ceph: remove bogus checks and WARN_ONs from ceph_set_page_dirty
NFS: nfs_find_open_context() may only select open files
power: supply: charger-manager: add missing MODULE_DEVICE_TABLE
power: supply: ab8500: add missing MODULE_DEVICE_TABLE
pwm: img: Fix PM reference leak in img_pwm_enable()
pwm: tegra: Don't modify HW state in .remove callback
ACPI: AMBA: Fix resource name in /proc/iomem
ACPI: video: Add quirk for the Dell Vostro 3350
virtio-blk: Fix memory leak among suspend/resume procedure
virtio_net: Fix error handling in virtnet_restore()
virtio_console: Assure used length from device is limited
x86/signal: Detect and prevent an alternate signal stack overflow
f2fs: add MODULE_SOFTDEP to ensure crc32 is included in the initramfs
PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun
power: supply: rt5033_battery: Fix device tree enumeration
NFSv4: Initialise connection to the server in nfs4_alloc_client()
um: fix error return code in slip_open()
um: fix error return code in winch_tramp()
watchdog: aspeed: fix hardware timeout calculation
nfs: fix acl memory leak of posix_acl_create()
ubifs: Set/Clear I_LINKABLE under i_lock for whiteout inode
PCI: iproc: Fix multi-MSI base vector number allocation
PCI: iproc: Support multi-MSI only on uniprocessor kernel
x86/fpu: Limit xstate copy size in xstateregs_set()
pwm: imx1: Don't disable clocks at device remove time
virtio_net: move tx vq operation under tx queue lock
nvme-tcp: can't set sk_user_data without write_lock
ALSA: isa: Fix error return code in snd_cmi8330_probe()
NFSv4/pNFS: Don't call _nfs4_pnfs_v3_ds_connect multiple times
hexagon: use common DISCARDS macro
ARM: dts: gemini-rut1xx: remove duplicate ethernet node
reset: a10sr: add missing of_match_table reference
ARM: exynos: add missing of_node_put for loop iteration
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3
ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
memory: atmel-ebi: add missing of_node_put for loop iteration
reset: brcmstb: Add missing MODULE_DEVICE_TABLE
memory: pl353: Fix error return code in pl353_smc_probe()
rtc: fix snprintf() checking in is_rtc_hctosys()
arm64: dts: renesas: v3msk: Fix memory size
ARM: dts: r8a7779, marzen: Fix DU clock names
firmware: tegra: Fix error return code in tegra210_bpmp_init()
firmware: arm_scmi: Reset Rx buffer to max size during async commands
ARM: dts: BCM5301X: Fixup SPI binding
reset: bail if try_module_get() fails
memory: fsl_ifc: fix leak of IO mapping on probe failure
memory: fsl_ifc: fix leak of private memory on probe failure
ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema
ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema
ARM: dts: imx6q-dhcom: Fix ethernet reset time properties
ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems
ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery
thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations
firmware: turris-mox-rwtm: fix reply status decoding function
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
mips: always link byteswap helpers into decompressor
mips: disable branch profiling in boot/decompress.o
MIPS: vdso: Invalid GIC access through VDSO
scsi: scsi_dh_alua: Fix signedness bug in alua_rtpg()
misc: alcor_pci: fix inverted branch condition
seq_file: disallow extremely large seq buffer allocations
Linux 5.4.134
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ibe7366c072d9377d606dd2779310ba30826806cb
commit 8cae8cd89f05f6de223d63e6d15e31c8ba9cf53b upstream.
There is no reasonable need for a buffer larger than this, and it avoids
int overflow pitfalls.
Fixes: 058504edd0 ("fs/seq_file: fallback to vmalloc allocation")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 281e468446994a7672733af2bf941f4110d4a895 upstream.
This patch fixes a trivial mistake that I made in the previous attempt
in fixing the null bridge issue. The branch condition is inverted and we
should call alcor_pci_find_cap_offset() only if bridge is not null.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 3ce3e45cc333 ("misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge")
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210522043725.602179-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80927822e8b6be46f488524cd7d5fe683de97fc4 upstream.
The "retval" variable needs to be signed for the error handling to work.
Link: https://lore.kernel.org/r/YLjMEAFNxOas1mIp@mwanda
Fixes: 7e26e3ea0287 ("scsi: scsi_dh_alua: Check for negative result value")
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 47ce8527fbba145a7723685bc9a27d9855e06491 ]
Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO
doesn't return the correct time when using the GIC as clock source.
The address of the GIC mapped page is in this case not calculated
correctly. The GIC mapped page is calculated from the VDSO data by
subtracting PAGE_SIZE:
void *get_gic(const struct vdso_data *data) {
return (void __iomem *)data - PAGE_SIZE;
}
However, the data pointer is not page aligned for raw clock sources.
This is because the VDSO data for raw clock sources (CS_RAW = 1) is
stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0).
Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:
+--------------------+
| |
| vd[CS_RAW] | ---+
| vd[CS_HRES_COARSE] | |
+--------------------+ | -PAGE_SIZE
| | |
| GIC mapped page | <--+
| |
+--------------------+
When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns
the wrong address (somewhere inside the GIC mapped page). The GIC counter
values are not returned which results in an invalid time.
Fixes: a7f4df4e21 ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()")
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97e488073cfca0eea84450169ca4cbfcc64e33e3 ]
Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o
to prevent linkage errors.
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict':
decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update'
mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow
Fixes: e76e1fdfa8 ("lib: add support for LZ4-compressed kernel")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cddc40f5617e53f97ef019d5b29c1bd6cbb031ec ]
My series to clean up the unaligned access implementation
across architectures caused some mips randconfig builds to
fail with:
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel':
decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2'
It turns out that this problem has already been fixed for the XZ
decompressor but now it also shows up in (at least) LZO and LZ4. From my
analysis I concluded that the compiler could always have emitted those
calls, but the different implementation allowed it to make otherwise
better decisions about not inlining the byteswap, which results in the
link error when the out-of-line code is missing.
While it could be addressed by adding it to the two decompressor
implementations that are known to be affected, but as this only adds
112 bytes to the kernel, the safer choice is to always add them.
Fixes: c50ec67875 ("MIPS: zboot: Fix the build with XZ compression on older GCC versions")
Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers")
Link: https://lore.kernel.org/linux-mm/202106301304.gz2wVY9w-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202106260659.TyMe8mjr-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202106172016.onWT6Tza-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202105231743.JJcALnhS-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 030e4138d11fced3b831c2761e4cecf347bae99c ]
If an error occurs after a pci_enable_pcie_error_reporting() call, it must
be undone by a corresponding pci_disable_pcie_error_reporting() call, as
already done in the remove function.
Link: https://lore.kernel.org/r/77adb02cfea7f1364e5603ecf3930d8597ae356e.1623482155.git.christophe.jaillet@wanadoo.fr
Fixes: 3567f36a09 ("[SCSI] be2iscsi: Fix AER handling in driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2eab59cf0d2036a5a9e264f719b71c21ccf679c2 ]
When Marvell's rWTM firmware, which does not support the GET_RANDOM
command, is used, kernel prints an error message
hwrng: no data available
every 10 seconds.
Fail probing of this driver if the rWTM firmware does not support the
GET_RANDOM command.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72f99888944c44de1c899bbe44db1e53bdc9d994 ]
Report a notice level message if a command is not supported by the rWTM
firmware.
This should not be an error, merely a notice, because the firmware can
be used on boards that do not have manufacturing information burned.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e34e60253d9272311831daed8a2d967cf80ca3dc ]
The status decoding function mox_get_status() currently contains an
incorrect check: if the error status is not MBOX_STS_SUCCESS, it always
returns -EIO, so the comparison to MBOX_STS_FAIL is never executed and
we don't get the actual error code sent by the firmware.
Fix this.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8946187ab57ffd02088e50256c73dd31f49db06d ]
The fixed value of 157 used in the calculations are only correct for
M3-W, on other Gen3 SoC it should be 167. The constant can be derived
correctly from the static TJ_3 constant and the SoC specific TJ_1 value.
Update the calculation be correct on all Gen3 SoCs.
Fixes: 4eb39f79ef ("thermal: rcar_gen3_thermal: Update value of Tj_1")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210605085211.564909-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddc873cd3c0af4faad6a00bffda21c3f775126dd ]
The i2c bus can freeze at the end of transaction so the bus can no longer work.
This scenario is improved by adding scl/sda gpios definitions to implement the
i2c bus recovery mechanism.
Fixes: 52c7a088ba ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2bdd3484890441b9cc2560413a86e8f2aa04157 ]
To make the ethernet cable plugin detection reliable the
power detection of the smsc phy has been disabled.
Fixes: 52c7a088ba ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c016c26c1631f539c652b5d82242a3ca402545c1 ]
Fix ethernet reset time properties as described in
Documentation/devicetree/bindings/net/ethernet-phy.yaml
Fixes: 52c7a088ba ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b11fec7345f21995f4ea4bafb0e108b9a620238 ]
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.
Fixes: b0b039515445 ("ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 414bfe1d26b60ef20b58e36efd5363188a694bab ]
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.
Fixes: 444d66fafa ("ARM: dts: add spi wifi support to cm-t335")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e0d09b1232d0538066c40ed4c13086faccbdff6 ]
On probe error the driver should free the memory allocated for private
structure. Fix this by using resource-managed allocation.
Fixes: a20cbdeffc ("powerpc/fsl: Add support for Integrated Flash Controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210527154322.81253-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b132ab67fc7a358fff35e808fa65d4bea452521 ]
On probe error the driver should unmap the IO memory. Smatch reports:
drivers/memory/fsl_ifc.c:298 fsl_ifc_ctrl_probe() warn: 'fsl_ifc_ctrl_dev->gregs' not released on lines: 298.
Fixes: a20cbdeffc ("powerpc/fsl: Add support for Integrated Flash Controller")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210527154322.81253-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fb26fb83f0def3d39c14e268bcd4003aae8fade ]
Abort instead of returning a new reset control for a reset controller
device that is going to have its module unloaded.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 61fc413176 ("reset: Add reset controller API")
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210607082615.15160-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5aede3e6dd1b8ca574600a1ecafe1e580c53f2f ]
1. Reorder interrupts
2. Fix typo: s/spi_lr_overhead/spi_lr_overread/
3. Rename node: s/spi-nor@0/flash@0/
This fixes:
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi@18029200: interrupt-names: 'oneOf' conditional failed, one must be fixed:
['spi_lr_fullness_reached', 'spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted'] is too long
Additional items are not allowed ('spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted' were unexpected)
'mspi_done' was expected
'spi_l1_intr' was expected
'mspi_halted' was expected
'spi_lr_fullness_reached' was expected
'spi_lr_session_aborted' was expected
'spi_lr_impatient' was expected
'spi_lr_session_done' was expected
'spi_lr_overread' was expected
From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi-nor@0: $nodename:0: 'spi-nor@0' does not match '^flash(@.*)?$'
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cb7af474e0dbb2f500c67aa62b6db9fafa74de2 ]
During an async commands execution the Rx buffer length is at first set
to max_msg_sz when the synchronous part of the command is first sent.
However once the synchronous part completes the transport layer waits
for the delayed response which will be processed using the same xfer
descriptor initially allocated. Since synchronous response received at
the end of the xfer will shrink the Rx buffer length to the effective
payload response length, it needs to be reset again.
Raise the Rx buffer length again to max_msg_sz before fetching the
delayed response to ensure full response is read correctly from the
shared memory.
Link: https://lore.kernel.org/r/20210601102421.26581-2-cristian.marussi@arm.com
Fixes: 58ecdf03db ("firmware: arm_scmi: Add support for asynchronous commands and delayed response")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: moved reset to scmi_handle_response as it could race with
do_xfer_with_response]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fea67710e9f6a111a2c9440576f2396ccd92d57 ]
When call irq_get_irq_data() to get the IRQ's irq_data failed, an
appropriate error code -ENOENT should be returned. However, we directly
return 'err', which records the IRQ number instead of the error code.
Fixes: 139251fc22 ("firmware: tegra: add bpmp driver for Tegra210")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ab8c23096a29b69044209a5925758a6f88bd450 ]
"make dtbs_check" complains:
arch/arm/boot/dts/r8a7779-marzen.dt.yaml: display@fff80000: clock-names:0: 'du.0' was expected
Change the first clock name to match the DT bindings.
This has no effect on actual operation, as the Display Unit driver in
Linux does not use the first clock name on R-Car H1, but just grabs the
first clock.
Fixes: 665d79aa47 ("ARM: shmobile: marzen: Add DU external pixel clock to DT")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/9d5e1b371121883b3b3e10a3df43802a29c6a9da.1619699965.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54b909436ede47e0ee07f1765da27ec2efa41e84 ]
The scnprintf() function silently truncates the printf() and returns
the number bytes that it was able to copy (not counting the NUL
terminator). Thus, the highest value it can return here is
"NAME_SIZE - 1" and the overflow check is dead code. Fix this by
using the snprintf() function which returns the number of bytes that
would have been copied if there was enough space and changing the
condition from "> NAME_SIZE" to ">= NAME_SIZE".
Fixes: 92589c986b ("rtc-proc: permit the /proc/driver/rtc device to use other devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/YJov/pcGmhLi2pEl@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76e5624f3f9343a621dd3f4006f4e4d9c3f91e33 ]
When no child nodes are matched, an appropriate error code -ENODEV should
be returned. However, we currently do not explicitly assign this error
code to 'err'. As a result, 0 was incorrectly returned.
Fixes: fee10bd226 ("memory: pl353: Add driver for arm pl353 static memory controller")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210515040004.6983-1-thunder.leizhen@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
