Enable DUMP_REO_QUEUE_INFO_IN_DDR to send cache flush cmd
to REO using cmd: iwpriv wlan0 txrx_stats 34 0
Cache flush cmd will invalidate the h/w cache and ensure
that h/w writes to DDR.
In the cmd callback, the reo status tlvs are processed
and the vaddr of the reo queue desc is used to read the
queue information from DDR and dump it in the host driver logs.
Change-Id: I4521b777d13c490ac687f9ff673182262bc52f62
CRs-Fixed: 2899824
In QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION cmd parameters,
If attribute QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION is missed,
should return 0 instead of failed.
Change-Id: I5e570b9237768800e06d839814919d058a5e1d1f
CRs-Fixed: 2926104
By default, the driver fills the roam scan scheme as none for
all the triggers in WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
but if the roam scan scheme bitmap is set for particular
trigger, then for the corresponding trigger the roam scan scheme
should be sent as ROAM_TRIGGER_SCAN_MODE_PARTIAL.
Send ROAM_TRIGGER_SCAN_MODE_PARTIAL if roam scan scheme bitmap is
provided.
Change-Id: I82f16f7c0e24be472c95278eb3085f7d2623b63a
CRs-Fixed: 2914142
Firmware rejects TWT setup request due to roaming
in progress and channel switch with reason code
WMI_ADD_TWT_STATUS_ROAM_IN_PROGRESS,
WMI_ADD_TWT_STATUS_CHAN_SW_IN_PROGRESS.
Add support to handle TWT setup with new reason code.
Change-Id: I07dffc4a9ef10886c202f7c15300458018a7b7b6
CRs-Fixed: 2908380
Currently, while fetching ipv4 list in_dev is get via
in_dev_get and ref count of in_dev is incremented but
after fetching ip list in_dev_put is not used. So,
ref count will not be zero and may lead to issue while
destorying in_dev.
Fix is to use in_dev_put to maintain ref count to free
in_dev during rmmod.
Change-Id: I20a73127bb41c807315dbcd18adc1fb4278aa6d3
CRs-Fixed: 2921256
Add support to reject TWT setup request if received when the below
mentioned concurrency scenario exists.
STA + SAP: SCC or MCC: Reject TWT setup
STA + P2P: SCC or MCC: Reject TWT setup
Change-Id: I5c4c2bcc032276a0b83b7a46a44dbf7933cda29f
CRs-Fixed: 2923726
The userspace doesn't expect TWT teardown or notify events after
roaming. So to clear the driver internal TWT context, for old
peer, call the mlme_init_twt_context() on roam synch complete.
Change-Id: If1e4fe2d79561885052caf8d5231d1c943f10c96
CRs-Fixed: 2912872
If firmware sends the TWT teardown due to concurrent session is
established, then the wait for notify flag is not set. So other
commands can be sent to firmware.
In case of TWT teardown due to concurrency, set the wait for
notify flag.
Change-Id: Ia1d5134e1c6d931f8c5ced1c011efb3489d343ad
CRs-Fixed: 2919799
If STA connection is in 11b mode and TDLS connect in HE, the
phymoe is not calculated properly.
Handle the HE mode in 11b network type as well.
Change-Id: I0ddafa0b4be8d6eab02c66be7c0f909c2d968918
CRs-Fixed: 2923182
check if runtime pm enabled in wlan_hdd_runtime_resume
and wlan_hdd_runtime_suspend.
Change-Id: I107f953d19ea6078d8bb8a59d51dcac6736ff914
CRs-Fixed: 2920169
Add support to reject the TWT setup request if there exists
another TWT session with different dialog id.
Change-Id: I59c0ba4279581bad14bec886d22c0ac65838ec17
CRs-Fixed: 2920494
Currently, mlme_twt_is_command_in_progress() function checks if the given
command is in progress or not. For inputs like WLAN_TWT_ANY, if this function
returns true then from the current logs, its not known which
active command in progress.
Hence for better debugging, enhance this function to return active command.
Change-Id: Ibc5c5babb042408b0e8988fe229d344ed98bfff3
CRs-Fixed: 2920494
HSP doesn't support TX_AGGREGATION_SIZE ini, need disable it to avoid
confusing.
Change-Id: I9e49ad5218f913f116cf4472f768f572740f14df
CRs-Fixed: 2918796
Currently if STA is connected to HT only AP and if BW change
due to OBSS scan the htSupportedChannelWidthSet is not updated
and thus TDLS peer which use htSupportedChannelWidthSet to get
BW may not consider the vdev BW for HT and thus peer's BW can
go beyond VDEV's BW.
Fix this by updating htSupportedChannelWidthSet on vdev restart
on HT BW change
Change-Id: I7253fd240206ec27eac3e2b1de8debf8705a8234
CRs-Fixed: 2920539
In the current implementation of the function
__wlan_hdd_cfg80211_set_wifi_test_config, if the status returned by
get_cfg API is not Success, it returns froms the function without
freeing the allocated memory. This causes a potential memory leak.
To avoid this, free the allocated memory properly.
Change-Id: I5f9ac5f2edc49ebad662f18dbe09893f8bee6459
CRs-Fixed: 2918850
The feature HIF_DETECTION_LATENCY_ENABLE is not applicable for all targets.
To avoid issues, enable this feature based on target.
Change-Id: Ia7bab02710ee2bbb9f487571ec98992ac338961f
CRs-Fixed: 2915968
Currently FW dbg log levels are configured for every vdev creation.
But this is pdev level configuration and doesn't required to configure
for every vdev. Because of this WMI commands are getting flooded.
To avoid this, configure FW debug log levels only for first vdev
creation.
Change-Id: Ie395c1a7b0756a08ad7948997531c6920d83ae0b
CRs-fixed: 2913901
In STA+SAP mode, disable pipes is not done as part of either
last client disconnection or SAP down. In the scenario where
APPS suspend does not get triggered, IPA pipes are not disabled
and on runtime suspend, PCIe link is suspended which would result
in a NOC error if IPA HW accesses wlan registers.
Fix is to avoid runtime suspend if there are any pending IPA
tx completions.
Change-Id: I190da658d233cb5d6c85846312ddc7a251f9f9d5
CRs-Fixed: 2918334
1. If the TWT setup parameter re-negotiation results in failure,
then host driver shall trigger TWT teardown for the
existing TWT session.
2. Upon receiving the TWT teardown confirmation from the firmware,
host driver shall cleanup TWT session, send teardown notification
to the user space and ready for next TWT setup command.
Change-Id: I553ae7de8d900a3dc12d563b781f9fefa36f8a0b
CRs-Fixed: 2916548
The operating class triplet was removed from country IE. Add the logic
to populate it back in.
Change-Id: Ia9a1489e04d832b650dbe203534f38980e7e1506
CRs-fixed: 2913363
Send igmp offload command to fw with disable flag
once host comes to resume state from suspended state.
Change-Id: Iec2c6830028bf13dd90ac0a842774a4a7138286c
CRs-Fixed: 2911248
offload igmp feature to fw in case of suspended state
to avoid high power consumption.
Change-Id: I05fbf23dc2836f8f5dc6e2f45b35bf2d30c39790
CRs-Fixed: 2907644
The current implementation of add-wlan-objs does not work correctly
with GNU Make 3.81 which is widely in use. So refine the function in a
manner that works with 3.81 as well as newer versions of Make.
Change-Id: Ic689367cccc16cf6ab23eeeb58665d84c5db3a26
CRs-Fixed: 2903606
Currently the tcp delack reset config is initiated,
unconditionally, when the bus bandwidth timer is stopped.
This leads to unnecessary tcpdelack settings even if
it has not been enabled.
Reset the tcp delack setting from bus bandwidth timer stop
only if tcp delack is enabled.
Change-Id: I492ed18e80703f64bb0340d781f64760d6da2004
CRs-Fixed: 2914604
Currently, the AP power mode is only updated during HE OP IE population.
This causes the country IE to use the incorrect TX powers since HE OP is
populated afterwards. Add a call to update the power mode whenever the
country changes.
Change-Id: I46641d12f1aed045dbe1becf4b96ff65c5746c5b
CRs-fixed: 2910774
Currently runtime resume is marked as success after kicking
HTC queues, due to this non PM marked WMI commands are not
sent out properly.
Fix this by marking runtime resume as success before kicking
HTC queues, since resume is set as success as part of HTC kick
queues WMI commands will be sent out properly.
Change-Id: I5e3f98cbc5888bdf83f760b055c9b706c18737ef
CRs-Fixed: 2899609
