Change CONFIG_SLUB_DEBUG_ON to HIF_CONFIG_SLUB_DEBUG_ON to differentiate
kernel CONFIG_SLUB_DEBUG_ON macro with hif specific debug option.
Change-Id: I8922d5c37363da382f3f0b23489f8fd3544eed7d
CRs-Fixed: 1088928
In current code ext group interrupts are not support. Defined these
functions to NULL to avoid compilation issue.
Change-Id: I7e1e027a3faabce1a8844606c5c5c3a412256ded
CRs-Fixed: 1088926
Using a buffer after passing it to wmi_unified_cmd_send() induces a
race condition that may result in a use-after-freed situation. Fix
several potential use-after-freed situations when calling
wmi_unified_cmd_send() by ensuring all access to a buffer is done
before the call to wmi_unified_cmd_send().
Change-Id: I985aad6e49daf1d823e3751a9cb0a293a298323c
CRs-Fixed: 1089713
Before disabling the interrupts, disable NAPI so that
the softirq cannot be [re-]scheduled.
Remove the affinity notification on the irq.
Change-Id: I64061d2b4f2e1e6eff67416133b928faa9c0dd4c
CRs-Fixed: 1089166
The interrupt free code is protected by a flag. In the normal case
the interrupts are freed before the bus is stopped. Make all cases
free the interrupt before hif_stop.
Change-Id: I1e1dfae9ba388733eb13f2cdf90aa85b3db35b0d
CRs-fixed: 1089935
Durring a driver load failure, the fastpath buffer is allocated
before the fastpath handler is installed. Change the free logic
to match the allocation logic.
Change-Id: Ib9731b3d06d7ac728e0f23bb32e2b74c35b9a8de
CRs-Fixed: 1089933
Since dump_hex_trace is defined as a static function,
it should not be exported. The 2 scopes conflict.
Change-Id: Ia39a4fdcffeffa452b684f77d015eabd421e89e8
CRs-Fixed: 1089727
Mark the timeout messages in qdf_dp_display_record with
the 'DPT:' prefix and print them with the same error
level as other DPT messages.
Note that there are allready error level logs in HDD to
indicate that a timeout occured. The value add here is that
this timeout is noted in the contect of DPTRACE where prior
successfull packets will also have been logged.
Change-Id: I87b041895462474d37d092d48aa4c7e957ff45c5
CRs-Fixed: 1089725
This allocation failure will likely lead to a copy engine
stall and subsequent need to restart the subsystem.
Abort the module start immediately to avoid a system crash
or delayed subsystem restart.
Change-Id: Ibe7b348dee39d35e3e7f767f17f0114d888a30f8
CRs-Fixed: 1088725
DPT prints were flooding kmesg and causing watchdog bark
in stress testing cases. Reduce log level to info and
only include the prints in the driver log.
Change-Id: If6ba6786cfe9ff050a21673002ef273a670c3f68
CRS-Fixed: 1089051
Make changes for per per Rx context LRO manager, this addresses
all parallel Rx concurrency issues. There by removes all the contention.
Change-Id: I90604ffdf7b7fd930eee636426a4c7fc9b92c7d7
CRs-Fixed: 1079320
Function prototype for hif_get_dev_ba is added in hal_sng.c to avoid
warning. This should be ideally added in header file. Removing the
prototype from c file.
Change-Id: I3220765b1dbc8a2cd5a45ccfe85fde09aee12a00
CRs-Fixed: 1079655
Function prototype for hif_get_dev_ba is c file to avoid
warning. This should be ideally added in header file. Adding this
prototype in hif.h.
Change-Id: Ic61c5b8278e6e888931721e716de74c4703ace82
CRs-Fixed: 1079655
STATS log for:
a) total time for tx
b) total time for rx(inside bss)
c) total time for rx(outside bss)
On "iwpriv athX txrx_fw_stats 24" command, stats logged
On "iwpriv athX txrx_fw_stats 25" command, stats logged and reset
Change-Id: I3b7d794e155916745a2c6c045984b416d3dc91ee
CRs-Fixed: 1072258
Add helper routines to extract TLV params in WMI EXT service ready
event. These helper routines abstracts all TLV related information
providing APIs to extract ext serivce ready params.
Change-Id: Ic989331856ed2f9376965bdec4b658328f9e470b
CRs-Fixed: 1079237
On 64-bit platform consistent mem alloc was failing due to NULL
passed for dev. Fix this by passing valid dev in consistent mem alloc
call.
Change-Id: I730af58c637dc652c4e249b83d432e0b5f01f7fb
CRs-fixed: 1079575
qcacld-2.0 to qcacmn propagation
In USB solution, one WMI command will consume
one "resource". So, for WMI endpoint, the
"resource" number of one bundle is
HTC_MAX_MSG_PER_BUNDLE_TX rather than 2 *
HTC_MAX_MSG_PER_BUNDLE_TX.
Change-Id: Ia60e49a403a0d689d1ba8397f7c796cd911ab918
CRs-Fixed: 1013006
qcacld-2.0 to qcacld-3.0 propagation
MTRACE logs timestamp format is different from logcat logs,
and it's difficult to correlate with other logs.
This fix changes the timeformat of MTRACE logs
from qtimer ticks to hr:min:sec:msec
Change-Id: I45e5d28fbeccd757648f05ce4e593d8ca4fe7804
CRS-Fixed: 1049125
qcacld-2.0 to qcacmn propagation
To debug the fwr stuck issue as early as possibile,
reduce the wmi max pending command threshold to 256
from 1024.
Change-Id: Ic3cbe26cca979dcaa68fca03e6fe1af397cf0c4f
CRs-FIXED: 1080761
During SSR, HDD context prevails, no need to free the contexts.
Hence add an API to sanatize runtime pm list during SSR shutdown.
CRs-Fixed: 1082449
Change-Id: I189eca6fc31dfa2cdedade3d5308f01311d72c88
Currently on a HDD Tx timeout, we are recording the event in DP Trace
framework. Currently the framework is unable to handle calls where skb
is NULL.
Add code to handle cases in qdf_dp_trace where the skb could be NULL.
Change-Id: I4d04cd59f11f19c4ba81219925c7f3011c97de29
CRs-Fixed: 1083941
Target 8074 changes for emulation platform (VP/M2M/SOC) are under
compilation switch which does not allow single meta to run for
legacy platforms and Hawkeye emulation platform.
Change compile time switch to run time check for target.
Keep all emulation related changes under QCA8074_VP switch which
needs to be always enabled. It helps to identify emulation specific
changes. All emulation changes are enabled for target type 8074.
CRs-Fixed: 1082545
Change-Id: Id0bab52735154db086b56ecd751578dba75a311a
