Currently when SAE single pmk lifetime expires, the userspace
issues disconnect. To avoid this, on reaching a threshold value
of the total pmk lifetime, the firmware will clear the single
PMK and initiate a roam scan to perform full SAE and derive
new pmk.
Add changes to:
1. Send the remaining single pmk timeout value in seconds to
firmware.
this is calculated as the diffence in pmk timeout configured by
userspace and the time passed after set_pmksa was done (which is
system timestamp between the set_pmksa timestamp and timestamp at
which RSO command is filled).
2. Add internal roam trigger for SPMK timeout trigger.
3. Set the roam score delta value as 0 for SPMK timeout roam
trigger.
Change-Id: I62c2ddbbfeb2811a4342d41f2bdaa8d988568bcc
CRs-Fixed: 2869665
Refactor WLAN_FEATURE_PKT_CAPTURE_LITHIUM to WLAN_FEATURE_PKT_CAPTURE_V2
and refactor pkt_capture_get_pktcap_mode_lithium to
pkt_capture_get_pktcap_mode_v2 to remove hardware name from compilation
flag and function name.
Change-Id: Id12c60a47dee95a719cc39aa0803edc9582dda3b
CRs-Fixed: 2869808
SAP stops working when it comes first and then sta connection
happens in non dbs HW mode
Allow SAP on non dbs HW even if the channel is safe or
lte-coex enabled.
Change-Id: I3e80b423ccb30fdb5e53a6d2aff961162b316e1c
CRs-Fixed: 2873957
Currently MIC verification is not proper for fragmented packets,
fix MIC verification for helium family.
Change-Id: Iac95c579287bafedf6521b38f2c628fd08cca72d
CRs-Fixed: 2869483
In func aead_decrypt_assoc_rsp(), it calls
find_ie_data_after_fils_session_ie() to find IE pointer after
FILS session IE from the frame payload.
There is possibility of integer underflow if frame payload length is
less than FIXED_PARAM_OFFSET_ASSOC_RSP which may increase value
of buf_len variable in find_ie_data_after_fils_session_ie() and
cause OOB during parsing process.
Validate frame payload length with FIXED_PARAM_OFFSET_ASSOC_RSP,
if it is less then return failure.
Change-Id: I78fbcfeaa1058fcf2a6fe47cd5c26390b54974af
CRs-Fixed: 2859024
Log page fault info to console for easy observation on third party
platform because the customer usually don't run cnss_diag_lite to
capture cnss logs.
Change-Id: I56a155844837792f08692703d28326fe9543c977
CRs-Fixed: 2870335
Currently fwol event handler register/unregister are done during
psoc open and close. When cds_enable fails, wmi_handle will be
freed and it may cause use after free access during the unregister
of event handler.
To address this, Move register and unregister of fwol event handlers
to fwol psoc enable and disable.
Change-Id: Ia51953753d201f6ac05e3e6c1c8bc0598d7c563e
CRs-Fixed: 2874676
Pass a new flag to the Kbuild and add a compile flag
to enable the BUILD_TAG information.
Change-Id: Ic9bc331b64e7cbf627f5f99758f4d556328cda10
CRs-Fixed: 2865654
To improve build time performance remove date and time
embedding from wifi DLKM Kbuild config.
Change-Id: I465699005b0e5eee762f528a8d8f102c1987b18e
CRs-Fixed: 2855334
stack frame size of lim_process_mlm_auth_req() is more than
the default limit of 1024 bytes, so reduce stack frame size
by allocating dynamic memory to tSirMacAuthFrameBody.
Change-Id: Ia3ae5bc8d65b39d60c52129170f22cf53fb96f61
CRs-Fixed: 2844341
This reverts change:I9408713fcf828d24688ecc45290d8c90a8d54c22
as it's not needed anymore as the actual issue(commands waiting
in active queue for response when the vdev is deleted) is fixed
with change:Ie31936132a389685ff4ff55b43ccbb4102e65830.
This wait-for-response causes a delay of around 200ms in
vdev_create as it's a blocking call.
As vdev_create happens after finding the peer device in case of
p2p, overall connection is delayed and connection time has
increased from 350ms to 600ms. This effects the
uses cases like WFD where applications have strict timing
constraints after finding the device.
Change-Id: I45c223a8d157892d8ec64b04f68cfbf39d732833
CRs-Fixed: 2870774
To discard 5G candidates based on RSSI threshold, Introduce
a new INI "min_rssi_for_2g_to_5g_roam" to configure the RSSI
for High RSSI Trigger.
Min: -120
Max: 0
Default: -70
Change-Id: If4545296ef1b53d18b8ae4abf12d450f5e690240
CRs-Fixed: 2789017
Freeing keys in scheduler thread may cause race condition,
to avoid that, clear the obsolete keys before starting a
new connection in wpa_supplicant context.
Change-Id: Ibeecadb117bca8f88ce5dc052bcebe92423ace22
CRs-Fixed: 2872831
FISA debug macro is leading to unnecessary additional functional calls,
to avoid this cleaning up macro and pointing to nop when disabled.
Change-Id: I21ebd64f61e2c31736d55e2d17f588dbddbc15c7
CRs-Fixed: 2869361
stack frame size of lim_process_auth_frame_no_session()
is more than the default limit of 1024 bytes, so reduce
stack frame size by allocating dynamic memory to
tSirMacAuthFrameBody.
Change-Id: I37bd23e1d5814950d9c1912a40058666e3de264f
CRs-Fixed: 2844332
Per Change-Id: Ifac93fb869553d0f9eb553d5c41da43c8b014ad8, it
saves the latency level and reconfig it to fw after vdev
creates. But if user is doing WiFi OFF/ON, it expects the
default wlm level to set to fw.
Change-Id: I329ad90e09a39d461c52c614d9b7a5e23d9540dd
CRs-Fixed: 2873595
Currently, driver doesn't print STA info before passing it to the
kernel. This is making difficult to debug the STA disconnection
issues.
To address this, print sta info before giving to the kernel.
Change-Id: I8346bc489bfa3ca88b307fcb8d5cd4691ca8fe0d
CRs-Fixed: 2791922
Fisa flow entry napi id is initialized to invalid value,
which will cause out of bound access during fisa flush by vdev id.
Fix this by validating array index before access.
Change-Id: Ic7b1b1448194b75777f9dc392043275235caa7f7
CRs-Fixed: 2873033
According to new requirement, when SAP manadatory channel list
enabled (gWlanMccToSccSwitchMode = 4,
gEnableSAPManadatoryChanList=1), the SAP will only be started on
PSC and VLP channels on 6Ghz band. Add all 6GHz PSC & VLP channels
to SAP mandatory list.
Change-Id: I00514c0af9c1cc07460120c928ced652aa2e8d4e
CRs-Fixed: 2870590
Host uses "oem_6g_support_disable" INI value to configure
oem_6g_support_disable of wifi pos priv psoc object. If the Reg
domain doesn't support 6Ghz band and INI "oem_6g_support_disable"
value is 0, then host enables support for 6Ghz. Thus OEM apps
supporting 6Ghz fails to get 6Ghz channel information from host.
Hence use reg domain 6Ghz support and "oem_6g_support_disable"
INI value to update oem_6g_support_disable of wifi pos priv psoc
object.
Change-Id: Id5e5b6220f3ce880da3c40aa959887ebc6bbfa7c
CRs-Fixed: 2870971
Currently when TWT commands are sent to firmware, the host driver
doesn't acquire wake lock. So the wlan can got to wow mode before
receiving the TWT command response and the response will get
dropped since host is in wow mode.
To avoid this make the TWT events as wakeable so firmware can
wake up host if host is suspended.
Change-Id: I2750049f9173de564e24114731d3fdd8ec8d6d86
CRs-Fixed: 2869865
Add WMI service FW capability check before enabling D0 and D3
WoW for SAP and GO clients connected mode.
Change-Id: I878e4ee33807804e049bf1e8b8078d28fc1d4834
CRs-Fixed: 2869072
Zero initialization of Napi id can cause napi id zero context to flush
flow that are uninitialized. Which may cause a race condition if some
other napi context is using the uninitialized fisa flow entry during the
flow learning phase.
Change-Id: Iedca4ee112efa29c70a632c4a365e95f71e8f506
CRs-Fixed: 2864633
