Register for the widgets and interconnections in routing
driver only when the respective interfaces are supported.
Add config based approach for TDM, AUXPCM and MI2S interfaces.
Change-Id: I2b76e295d7cafde6062a3e0afbe7f25721fa9cca
Signed-off-by: Harshal Ahire <hahire@codeaurora.org>
Add more DAI-LINK to support concurrent audio for
lxc host and containers.
Change-Id: I4acf44e19cafb081653e9f93e0fc184700b05831
Signed-off-by: Guodong Hu <guodhu@codeaurora.org>
Fix for reading wsa881x name prefix from dtsi
and update in proper structure.
Change-Id: If80e9c26192e7918204c36849ca5cc19875e7084
Signed-off-by: Vangala, Amarnath <avangala@codeaurora.org>
Update the wsa881x analog codec entry in dailink header for holi.
Change-Id: I58ca525b528fe949921ed9e21af3a61779c67d65
Signed-off-by: Vangala, Amarnath <avangala@codeaurora.org>
The sound core driver used old pm_qos APIs which does not have CPU afinity mask.
As a result, ULL playback runs on all cpu cores.
This change uses new API call with affinity to core-1/2.
Change-Id: If59b6f32a421038c0f89611d160e4031e03a10ce
Signed-off-by: George Gao <georgao@codeaurora.org>
Add support to query module parameters from ADSP.
Change-Id: Ie63dd95cf27277f9c836becc98952d48971a3ec3
Signed-off-by: Harshal Ahire <hahire@codeaurora.org>
WCD937x codec requires clear registers to be written '1' and
'0' for clearing interrupts. Enable clear_ack flag in regmap
irq chip structure for wcd937x.
Change-Id: I0a2e4fc85fe6dca75885b5300840669afeabc80c
Signed-off-by: Vangala, Amarnath <avangala@codeaurora.org>
Add SWR MIC registers BOLERO_CDC_TX_TOP_CSR_SWR_MIC0_CTL
and BOLERO_CDC_TX_TOP_CSR_SWR_MIC1_CTL as volatile to
resolve SWR TX1 port mute issue.
Change-Id: I66e0d8e63ebabaca6f4aa562f18d7b58592a1d74
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add more FE-DAI to support concurrent audio for
lxc host and containers.
Change-Id: I8988a9e15675b23a99621db12ee9a4b500c4a12b
Signed-off-by: Guodong Hu <guodhu@codeaurora.org>
When headset is inserted and reboot device sometimes
headset is not detected after reboot as host_irq from
swr slave gets masked. This is because of cmd error seen
after clearing all irq which results in fifo flush.
Read swrslave irq before clearing so as to resolve cmd error.
Also enable host irq after clearing enum interrupt at master.
This ensures irq is properly enabled.
Change-Id: Id66029c65c4d813391bfeb8c0c619560f298eeab
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add missed frontend for QUIN_TDM_RX_1 and MultiMedia30
to reduce error log during bootup.
Change-Id: Ibe675df1b719dda3fd940cf0fd392018f9a99e63
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Update log type to reduce error log during bootup.
Change-Id: I9e95ea8d121f7dbf15d5c02268d7f8dc67d840e0
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add missed name for codec dma dais to reduce warning
log during bootup.
Change-Id: Ie95100a359fa992d323e68b98e3f76b202846337
Signed-off-by: Meng Wang <mengw@codeaurora.org>
On some lahaina devices, wcd codec is disabled and it would cause
issue when trying to use wcd widgets. Add flag to indicate if wcd
is disabled
Change-Id: Id19d0bd83728b10b457767f7d43cba8dac916772
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Fucntion msm_qti_pp_send_chmix_cfg_cmd() uses the param_hdr_v3
as the APR header structure for PSPD MtMx set params command.
This structure is the incorrect one which causes ADSP to parse
the PSDP set params payload wrongly and results failure for
non-LPI headset SVA. Use param_hdr_v1 instead to match the
one that ADSP uses to parse the PSPD set params payload.
Change-Id: Icc1d0b50193ab28e33007ca474eeebcb61e4d634
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Update register sequence of WSA883x codec to reduce CnP
during bringup and teardown of speaker path.
Change-Id: I348a55e1324b5c26a36b8d7c78edf52a66e40381
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
