Shyam Kumar Thella
bfc4e9409e
ARM: dts: msm: Include pm5100 and pm8010 regulators for monaco
...
Include pm5100 and pm8010 regulators for monaco.
Change-Id: I2d7e1ccdb0102a4380d27b90c693d02c1cdb4219
2021-05-28 15:40:14 +05:30
qctecmdr
eda280132a
Merge "ARM: dts: msm: Set qcom,rmnet_in_use_tcm_mem with RMNET composition"
2021-05-28 00:54:49 -07:00
qctecmdr
90680f90cb
Merge "ARM: dts: msm: add display support for monaco IDP"
2021-05-27 07:23:18 -07:00
qctecmdr
b69726b7d8
Merge "ARM: dts: msm: Update UFS phy regulator peak current for blair"
2021-05-27 07:23:18 -07:00
qctecmdr
e25106ff6b
Merge "ARM: dts: qcom: enable gpu mitigation for TSENS and BCL for monaco"
2021-05-27 07:23:18 -07:00
qctecmdr
dc5523c08d
Merge "ARM: dts: msm: Fix regulator naming for pm8010"
2021-05-27 07:23:18 -07:00
qctecmdr
aa9c29d9ce
Merge "ARM: dts: msm: Enable modem pa sensor config only for YUPIK QRD"
2021-05-27 07:23:18 -07:00
qctecmdr
c803fcb564
Merge "ARM: dts: msm: Add MSM PCIe bus driver device nodes for direwolf"
2021-05-27 07:23:17 -07:00
qctecmdr
8ebf4d3c7c
Merge "ARM: dts: msm: Remove unused static supplies for holi-pm6125"
2021-05-27 07:23:17 -07:00
Nitin Rawat
ab191dcc18
ARM: dts: msm: Update UFS phy regulator peak current for blair
...
This updates the UFS phy regulator peak current for blair .
Change-Id: I9ea54491ea6b724250c1886ab894105554c34f83
2021-05-27 17:07:24 +05:30
Venkata Prahlad Valluru
99d49f9efd
ARM: dts: msm: add display support for monaco IDP
...
Add display nodes and pinctrl details. Also update
platform details.
Change-Id: Ic4cb86758231c893d3c1a1cead2d1118103e143a
2021-05-27 15:56:56 +05:30
qctecmdr
d2801826ba
Merge "ARM: dts: msm: Include display nodes for yupik idp with PM7250B"
2021-05-27 02:31:38 -07:00
qctecmdr
d371d65d91
Merge "ARM: dts: msm: Add smb1394 support for holi-pm6125"
2021-05-27 02:31:38 -07:00
qctecmdr
4c266dd630
Merge "dt-bindings: kgsl: Add compatible property in qcom,gpu-model"
2021-05-27 02:31:38 -07:00
qctecmdr
4ae3a6393d
Merge "ARM: dts: msm: use dummy regulator for 3V eLDO supply of touch on Holi"
2021-05-27 02:31:37 -07:00
qctecmdr
3f57fe9ede
Merge "ARM: dts: msm: Disable EP initiated BW scaling on switch for sdxlemur"
2021-05-27 02:31:37 -07:00
qctecmdr
74b8ed012a
Merge "ARM: dts: msm: Disable two_pass_use_wfi quirk for yupik GPU"
2021-05-27 02:31:37 -07:00
Manaf Meethalavalappu Pallikunhi
716a110bc3
ARM: dts: qcom: enable gpu mitigation for TSENS and BCL for monaco
...
Enable gpu thermal zone mitigation for TSENS and BCL thermal
zones for monaco.
Change-Id: Iadb08edc362390c512a63ea6bc666eadcdfc02f8
2021-05-27 13:44:44 +05:30
qctecmdr
9916d04ae0
Merge "ARM: dts: msm: Add pin controls for camera GPIOs"
2021-05-26 23:35:33 -07:00
qctecmdr
0f1ff8b0df
Merge "ARM: dts: msm: Disable modem region reserved on sa8155"
2021-05-26 23:35:33 -07:00
qctecmdr
c8047d289f
Merge "ARM: dts: msm: add RPM managed regulator devices for QCS405"
2021-05-26 23:35:32 -07:00
qctecmdr
f0d0028323
Merge "ARM: dts: msm: Remove qcom,gpu-qdss-stm property for Shima GPU"
2021-05-26 23:35:32 -07:00
qctecmdr
b639f286e4
Merge "ARM: dts: qcom: add ipc and codec cdev nodes"
2021-05-26 23:35:32 -07:00
qctecmdr
7718e55305
Merge "ARM: dts: msm: Add device tree support for PM7250B"
2021-05-26 23:35:32 -07:00
Faiz Nabi Kuchay
33634c6333
ARM: dts: msm: Remove unused static supplies for holi-pm6125
...
Remove unused static supplies for holi MTP, CDP,
MTP-USBC, platforms with PM6125 pmic.
Change-Id: Ia5aa80d102c5b4649553810d12dc0ddea9c77443
2021-05-26 22:53:07 -07:00
Shyam Kumar Thella
06c2362cba
ARM: dts: msm: Fix regulator naming for pm8010
...
On monaco RPM uses "ldom" as the reasource name for PM8010.
Update the same in PM8010's regulator configuration.
Change-Id: Ic0f70d5bf16017d99cbee62d0e05fd15b131cf17
2021-05-27 11:12:27 +05:30
Shyam Kumar Thella
a23ab727cd
ARM: dts: msm: Fix ldoa3 regulator for monaco
...
Enable ldoa3 regulator on monaco.
Add compatible string for regulator resources of ldoa3.
Change-Id: I13de85d117c2d8f49cec4a5823215d588ca6f7d1
2021-05-27 10:28:36 +05:30
Rajeev Nandan
2f7190c5c4
ARM: dts: msm: use dummy regulator for 3V eLDO supply of touch on Holi
...
The 3V eLDO controlled by gpio#53 is always ON, to avoid any conflict
with the ALS sensor that is also using the same GPIO.
Make use of a dummy regulator for the touch 3V supply.
Change-Id: Ie40ab4c27a9f10222ce4fbc77f51e65acefeff8b
2021-05-26 21:31:54 -07:00
qctecmdr
b48dd0078b
Merge "ARM: dts: qcom: Add thermal overlay devicetree support for holi-pm6125"
2021-05-26 20:35:30 -07:00
qctecmdr
27f3fb652b
Merge "ARM: dts: msm: Add cnss dtsi to cpe"
2021-05-26 20:35:30 -07:00
qctecmdr
dc66369349
Merge "ARM: dts: qcom: Enable cx ipeak cooling device configuration for holi"
2021-05-26 08:49:07 -07:00
qctecmdr
648ac39be9
Merge "dt-bindings: Add dt bindings for silent boot mode"
2021-05-26 08:49:07 -07:00
qctecmdr
a5735683c6
Merge "ARM: dts: qcom: enable pmic alarm sensor and BCL thermal zones for monaco"
2021-05-26 08:49:07 -07:00
qctecmdr
32d18c1f24
Merge "ARM: dts: msm: Add ion secure heap and secure buffer for quin-vm"
2021-05-26 08:49:06 -07:00
qctecmdr
c25b8fcfe2
Merge "ARM: dts: msm: change min voltage of touch_avdd fixed regulator"
2021-05-26 08:49:06 -07:00
qctecmdr
eb3f6ae06c
Merge "ARM: dts: msm: Remove generic labels for regulators"
2021-05-26 08:49:06 -07:00
qctecmdr
526da6eb9f
Merge "ARM: dts: msm: Update ADC support for PM6125"
2021-05-26 08:49:06 -07:00
Gopala Krishna Nuthaki
10b8b40320
ARM: dts: msm: Enable modem pa sensor config only for YUPIK QRD
...
Enable modem pa sensors config rules only for yupik QRD and
remove for other platforms as per recommendation.
Change-Id: Icfb54a900b17fd9f6bfc1c7eb59dfa34bbdeba2b
2021-05-26 20:58:43 +05:30
Manaf Meethalavalappu Pallikunhi
0944f82250
ARM: dts: qcom: Add thermal overlay devicetree support for holi-pm6125
...
Add thermal overlay devicetree configurations like pmic alarm
sensor thermal zone mitigation and BCL thermal zone mitigation
for holi-pm6125.
Change-Id: I20fe0880938bde6a62a45a6f11b3b64ae8e847fb
2021-05-26 19:54:20 +05:30
Pankaj Gupta
d707d221b9
dt-bindings: kgsl: Add compatible property in qcom,gpu-model
...
We can define compatible property for qcom,gpu-model nodes.
Change-Id: Idd680b536a95d6124c06541253b0cb6b082d790e
2021-05-26 19:39:56 +05:30
Om Parkash
d15ff470b7
ARM: dts: msm: Add pin controls for camera GPIOs
...
Add pin controls for camera and camera sensor GPIOs.
Change-Id: If5eeed86b16735a227159553a78bda867f775295
2021-05-26 19:22:32 +05:30
qctecmdr
ded9e26158
Merge "ARM: dts: msm: Change the shmbridge default size to 1M"
2021-05-26 05:18:27 -07:00
qctecmdr
e4caede4e0
Merge "ARM: dts: msm: Add WDT node for SA2150P"
2021-05-26 05:18:27 -07:00
qctecmdr
7f2c4065e9
Merge "ARM: dts: msm: Add thermal zones for pm5100 temp alarm"
2021-05-26 05:18:27 -07:00
qctecmdr
43fd4b0c97
Merge "ARM: dts: qcom: update sdhc properties"
2021-05-26 05:18:27 -07:00
qctecmdr
f6f047741e
Merge "ARM: dts: msm: Add GPU support for monaco IoT"
2021-05-26 05:18:26 -07:00
qctecmdr
908fdb7a31
Merge "ARM: dts: qcom: add slate VA interface"
2021-05-26 05:18:26 -07:00
Veera Vegivada
60ce39efe6
ARM: dts: msm: add RPM managed regulator devices for QCS405
...
Also add RPM managed regulator devices for QCS405 so that
the client requests made for these regulators are aggregated
by the RPM processor along with the requests from other
processors.
Change-Id: Ie9d22bd3b2b080b691f21cecedd337aacf3d3702
2021-05-26 15:07:53 +05:30
Raghavendra Kakarla
fc3d7ceb13
ARM: dts: msm: Add rpm-smd node for qcs405
...
Add rpm-smd devic node for APSS communication with RPM.
Change-Id: I62497058ed67b97d94dc868250f305097260f64d
2021-05-26 02:34:51 -07:00
Ashish Chavan
e1d3b9d0e7
ARM: dts: msm: Add smb1394 support for holi-pm6125
...
Add support for smb1394 for holi-pm6125 mtp and mtp-usbc
platform, while at it remove smb1398 nodes for the same.
Change-Id: Ie0bce0b289739d1a206eeb6585dac8fca160f63a
2021-05-26 13:15:18 +05:30
