Routing driver searches CAL_TYPE list for a matching
topology and then searches the LSM_CAL_TYPE list if
no entry is found in the first list.
If it so happens that a capture type cal block is
present in the CAL_TYPE list, it will be picked even
though the correct entry is present in the LSM_CAL_TYPE list.
Flip the order to give priority to LSM_CAL_TYPE list.
We expect only LSM clients to populate this list and
also enforce exact match for LSM clients.
CRs-Fixed: 2250684
Change-Id: I2ab3481b43a5d8b059a20cb919ff097fc8cf2774
Signed-off-by: Haynes Mathew George <hgeorge@codeaurora.org>
Automotive machine driver is a child node of apr
so it will be re-probed upon ADSP UP event received
in APR driver during boot up.
Remove the dummy machine driver solution.
Change-Id: I9ac3e26366a5b01869183e8b83e47049ec770c7c
Signed-off-by: Derek Chen <chenche@codeaurora.org>
Add support for handling snd card status upon
SERVICE_DOWN and SERVICE_UP callback for ADSP SSR.
Change-Id: Ie753a0edc59ca10da8d9c23f9e6c7c6244a8e8a6
Signed-off-by: Rahul Sharma <rahsha@codeaurora.org>
Excessive logging by pr_err() could cause audio thread to stuck
in the printing session which results PD down notification timeout.
This eventually can cause ADSP PDR failure. Fix this issue by using
pr_err_ratelimited and dev_err_ratelimited to limit the number of
error messages during the ADSP PDR.
Change-Id: I68b617fef53ebd03ba79fd919bffd8c35e6eb048
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Check size of payload array before access in qdsp_cvp_callback.
Change-Id: Ic5ea6686a1a09df75ddd5e6fdcdfbd74efff83d8
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
The wcd-spi-ac (access control) driver exposes character
device to userspace to indicate information regarding
WCD SPI usage. Add uapi header file with the commands
and data expected by the character driver.
Change-Id: I41dfc3181041c7e7a1bad8695fa723d3a965036b
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Check size of payload array before access in qdsp_mvm_callback.
Change-Id: I81d945f963cfb4a3cb26155700b82880d891ec5e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
msm_compr_trigger for next track is updated with
q6asm_stream_open_write_v5 depending on the
avcs_api_version.
Change-Id: I6b3862a7b8e0480fffdcddc2ff0949cf5399d7a6
Signed-off-by: Nidhisha Dhananjayan <nidhis@codeaurora.org>
For codecs like tavil/tasha where the soundwire register access
is through codec bridge, the soundwire bus latency is absorbed
in slimbus io operations, hence do not require extra delay in
soundwire driver for io operations.
Change-Id: If77aa02f0c3c1755916b7a57776115d12e4f08bd
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Add support to process ec at channel count other than the
playback channel count by providing ability to set downmixed
channel count and downmixing weights to be used to downmix
ec ref data obtained from playback path.
These configs would be used to explicitly configure MFC module
present in ec ref path, for usecases where ec processing cannot
be done at playback channel count due to algorithmic or resource
limitations.
Also increase the ec ref channel count support to Sixteen from
current max of Eight.
Change-Id: I2297508aedd177580b1c9b2bed3c7c8421507629
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
Add support to process ec at channel count other than the
playback channel count by providing ability to set downmixed
channel count and downmixing weights to be used to downmix
ec ref data obtained from playback path.
These configs would be used to explicitly configure MFC module
present in ec ref path, for usecases where ec processing cannot
be done at playback channel count due to algorithmic or resource
limitations.
Change-Id: Iaa80a0f0da3697c55751b2201578252d6466d3b5
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
Buffering is not stopped during lsm close due to
which lab buffers can be queued during teardown of
session. This leads to read being issued even after session
close. Stop lab during close to avoid this. Use correct
return value to indicate errors during lsm start and stop.
Change-Id: I52fa33cebaa3ee6ae60eb2a60bb1e833f2a9d0d6
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
Remove impedance detection gpio callback function for tasha
variant as gpio control is not required for zdet.
Change-Id: Ic038d11c078241ca438cdff756fd666f6106d509
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Check the size of ADSP payload before accessing it.
Validate buffer index obtained from ADSP token before using it.
CRs-Fixed: 2372302
Change-Id: I3f5e1b6f515935a10a8c59c324452be0a71f9473
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Channel_mapping array size varies for different commands.
Add check for num_channels before calling q6asm_map_channels.
Change-Id: Iccbcfe82f716fc0ffe0a26b1779dcaa1c3cb805b
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
SLIMbus device ID can be different for SLIMbus ports on different
targets. Add support for dynamically assigning SLIMbus device ID
at bootup time from device tree.
Change-Id: I5a3b0812085ee53e8cd3bfac96eaaa939fda4106
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
BT use cases on Kona target uses Slimbus 7 ports. Add back
support for Slimbus 7 port for BT.
Change-Id: Iaa5128738106fdafabe84831237947c3880de214
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Add support for soundwire clock for VA usecase.
Change-Id: I1f56678ad36e4ae6c8dd458c0b7e96e847694050
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Check if packet size is large enough to hold the header.
Change-Id: I7261f8111d8b5f4f7c181e469de248a732242d64
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
When ADSP is in power collapse or island state, it would fail
to access LPASS codec register.Vote for LPASS core to avoid
LPASS power collapse with pmruntime approach while accessing
LPASS registers & TLMM.
Change-Id: I74d037e499fb6f1245b9a1bd1b0a77200608c27b
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Handle media format update events from ADSP in case of DSP loopback.
Change-Id: I4004759cc77a05f46106d359417f97f0326af19d
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Add mixer_ctl to set multichannel configuration for capture path.
Change-Id: Ibed2d459b8b3959322bd547fe9b7a3c270ef0550
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Allow to mark entries in a channel map as unused to prevent mixing other
channels in that slot.
Change-Id: Iefbfb861b796129211e929cb0ddb84041b9f57b0
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Allow to mark entries in a channel map as unused to prevent mixing other
channels in that slot.
Change-Id: I06f7de932dec4d30b2d6cfe04460d07ddad89049
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Add dai links to allow for several concurrent audio recordings
from SPDIF and HDMI interfaces on qcs405.
Change-Id: I5f4a2fcf16538f71ad14b3389732366e8d8e718f
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
