Voice call over headset does not disconnect on button press
while device is in suspend state. This is because inband interrupt
is not made wakeup capable. Make inband interrupt for swr tx as
wakeup capable. Also add wakeup source for swr device.
Change-Id: I5f2751672675bc8d62c4d2bfbbd651e640723d52
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
There can be deadlock between __bolero_reg_read/write and
bolero_runtime_suspend. Remove the mutex_lock in
bolero_runtime_suspend to avoid deadlock.
Change-Id: I712b9f24adeddda8899b39f90291394965443163
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Stop mbhc operations during ssr down to cancel
any pending detection sequences.
Change-Id: Iff054cf8b3099959a1be561bd937057258f57b81
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add DAPM widgets for soundwire clock on Tx path and
VA path to enable the desired clock source based on
the usecase.
Change-Id: I48b04e63317cefd8bf12d58b002efb37087f8dc2
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Validate channel number before using it to index codec dma
rx configuation array.
CRs-Fixed: 2420338
Change-Id: I48109beedba2423158fa84dee0b9ccac340979b1
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Make sure to get apr handle before sending a packet
so that it does not end up with no handle to send
the apr packet.
Change-Id: Iaaebee3ddc6c83896e4cb9dc8149d310fc7d67f1
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Component for channel map mixer control should be
extracted from pcm runtime instead of kcontrol's private data,
because kcontrol's private data in this case points to channel
map info.
CRs-Fixed: 2420279
Change-Id: Ibaeac4739b73a89d17f16cbacb1b5095d546968b
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add NULL check before access pointer to avoid dereference.
Change-Id: I2c7408348a0acf1a3801a5869f62bae328858beb
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Disable EN_CUR_DET to fix receiver noise as per hw team
recommendation.
Change-Id: Icbeea920d02279ff845072e54be1c449db7bd2da
Signed-off-by: Meng Wang <mengw@codeaurora.org>
If we start playback on special hs after record is done and perform
SSR/PDR then playback gets paused. This happens because ANA_TX_DIV2_CLK
which needs to be enabled for special hs gets disabled after record
is stopped. Maintain a count for ANA_DIV2_CLK to enable/disable it
as required.
Change-Id: Ic73475c83cb16e3c014f35b8d46ee22d2e7a2efd
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add support for SSR/PDR handling using SND event framework in
tasha codec.
Change-Id: Ief0bc7dc62d83635fdc905f1f385571e0e4b3190
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Trigger xt logging getparam at every playback close
and store data. When app queries sys/class node, return
stored values and reset to 0 for some params as per
app requirement.
Change-Id: Ice1a3e9a7e03062390f1c36184a971635e55d450
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Implement get param for AFE_PARAM_ID_SP_RX_TMAX_XMAX_LOGGING
in order to get excursion params from DSP.
Change-Id: I5129938c51c6f6ede9d4703d13be60d04d26f5e3
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
With speaker protection in v-validation mode, speaker
samples can be tested in early factory mode. Add
support for v-validation feature from driver.
Change-Id: I92493d6d2784cf4dd58021746bffe01180f89d23
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add v-validation feature support for set config for
wait time and validation time and get param
for status/vrms result of speaker.
Change-Id: I1bd91fbe17113a21c881e1ec1c735c50a963a692
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Update audio routings for HDR recording on WCD938x codec
for AMIC1 and AMIC5 paths.
Change-Id: I67b93fe11c7a5b16ffd4bb8b58431be9dfba615e
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
In wcd-spi driver, the kzalloc is used to allocate memory for TX and
RX buffer. Those allocations are order4 or order5, which could fail
on some kernels. To avoid potential memory allocation failure, the CMA
region is used for those allocations by dma_alloc_coherent API.
Change-Id: I0a4d6c6b5e0e47f96187563272e63c3a006e469f
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Check buffer size in qdsp_cvs_callback before access in
ul_pkt.
Change-Id: Ic19994b46086709231656ec747d2df988b7a512f
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
