Clock driver throws warning when clock disable is called
without enable. Disable core clock only if the respective clock
enable is successful to avoid this warning.
Change-Id: I489647a444c9be326e5805c353385240c6c6d0fc
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
IID support is set from user space during boot up
which can come in parallel with AFE set clock requests
due to which param payload is set in difference with
the actual set param command as per instance id support.
Change-Id: I07e45fda0943cac814f25c16da930dfae5d209a6
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
This reverts commit 40c749da4c.
This change needs a corresponding change in msm-4.19 which is
not yet ready. Revert this change for now, until the dependency
change is ready to be merged.
Change-Id: I7ac030b03c01500e6061dbc6e5b4ad13385a0109
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Add support for speech codec which is similar to a2dp aptx adaptive.
Change-Id: Ibfbcf086f009fdb561e26aaf92cefc92f1bd16ca
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Fix mismatch in TX clock count during three mic VA usecase.
Change-Id: I5f86fc8bf4f379e14ed8e15376f918b622bc221f
Signed-off-by: Sudheer Papothi <spapothi@quicinc.com>
Remove the invocation of function dev_set_name from the driver
msm-transcode-loopback since it is not needed anymore.
Change-Id: If47a053ccec35b913b6cb2456bbfcec91933b0bf
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
MHI APIs have been updated to support LPM. Move to
newer API to make use of device LPM.
Change-Id: I53bd3dff1b66d064091f21eb5f2a36ee77f965ed
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
Add mixer control to set channel number for speaker protection.
Change-Id: I67527119a65758c77dbf9b1d26cc51f956702b5e
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add Kcontrol to enable/disable digital mute for WSA RX0
and RX1.
Change-Id: Ib9ee2b01f142fdce5dab92eafe9c4b0c5d65844a
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
In trinket, wsa8810 variant show higher current.
As wsa8815 settings applied for wsa8810 variant
causing the issue. Update wsa aux codec matching logic
in machine driver to apply proper gain settings
for wsa8810 variant.
CRs-Fixed: 2406074
Change-Id: I5916ae7ea8e91aad4e0be6486502f5fcd8a96ff3
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
When detecting special headset, vref for special headset is
set based on headset threshold reference 1800mv or based on
regular micbias settings from device tree. Scale threshold
reference as per the special headset micbias voltage.
Change-Id: Ic4cc24e18efeb420b53a2154707c9399eb886181
Signed-off-by: Meng Wang <mwang@codeaurora.org>
In case TX HPF mixer ctl set to 150Hz, go bit register
is not updated. Always update go bit along with
setting 150Hz at TX enable sequence.
CRs-Fixed: 2407902
Change-Id: I05b8a471cb2505d1ca5b290ea7ba35da5a534170
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add Tx mixer routes for Quaternary and Quinary MI2S
to support voice call over these interfaces.
CRs-Fixed: 2194204
Change-Id: I33b0c0528fbbfe8cf17ce3fe14dbf2230f05d860
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Get Logical Address failure comes after SSR during rigorous testing.
This calls removal of swr master device attached. Once removal occurs
further headset insertion/removal does not get detected. Do not remove
swr master device attached to fix the issue.
Change-Id: Iac78b4a12ef296566d082e75ac8905f73d6b2a47
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Fix errors shown during bootup to ensure robustness and enable
cleaner bootup process.
Change-Id: I6d705afc3dbed9ae34ab8473c6b4ae402f7a0df2
Signed-off-by: Bala Kishore Pati <balakishorepati@codeaurora.org>
Add mixer controls and port id for PRIMARY_TDM interface
to support source tracking with TDM mics.
CRs-Fixed: 2193330
Change-Id: I62fd250e0feb3fbc190fb63d1398fc3082506f47
Signed-off-by: Surendar karka <sukark@codeaurora.org>
NOIRQ platform driver registers volume controls for playback
with ALSA control module. Extend this for capture stream as well.
CRs-Fixed: 2222250
Change-Id: I04a3bfe0a8f44b5cb7b8f24d05cf6d72dabf1fd9
Signed-off-by: Haynes Mathew George <hgeorge@codeaurora.org>
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
While allocating lsm client, lock and conditions are initialized
after registering session with APR. There is a possibility of
accessing uninitialized condition from q6lsm_callback when SSR
is triggerred after the port specific apr is registered.
Initialized lock, condition and state before registering session
with APR to avoid invalid access.
CRs-Fixed: 2230065
Change-Id: I48b6eb7670863c45b0539155592ea0b0a3c1bffc
Signed-off-by: pavanc <pavanc@codeaurora.org>
Updates to send VAD enable or disable to AFE port.
Send VAD and island configuration based on the ports
on which these features are supported in Vipertooth
machine.
Change-Id: Ib3e6d46fed3bf9e822f350c9ec0dc629cd82547e
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
On some platforms, WCD SPI bus can be shared with other processors
(ex: sensor processor). In such cases, there is need for software
to arbitrate the bus control. Add functionality to perform SPI bus
arbitration.
Change-Id: I7df933f55ac5035a55173a04e74b74f7af1f7ece
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Add driver to perform WCD SPI bus arbitration between two
masters. The two masters could reside on two different
processors and QMI is used to arbitrate the bus access.
This driver also exposes character driver interface to
userspace to indicate use case start/stop, etc.
Change-Id: I4f6fe6bb0bca524f10a34cf89149c6b2055b00e1
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
If data size is not greater than required size
while getting topology in routing driver, it leads
to invalid size pointer access. Add proper
size check to avoid this.
CRs-Fixed: 2384972
Change-Id: I8cd71a4ae866aca57c6d711cfd07e20c5edee3ae
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
