Add support to choose the hw_mode_id from FW supported modes. Preferred
mode will be selected if it is not configured in ini params. It is
selected based on the precedence as per capabilities supported by the
mode. For eg., if FW supports DBS and DBS_SBS, DBS_SBS is selected as it
supports three radio compared to DBS's two radio.
This can be overridden by user by setting proper hw_mode_id in ini file.
Change-Id: I162c3a66182882890c416a68f7f64d5149b8f1e5
CRs-Fixed: 2361280
The IPv6 address format allows compression of _one_ or more zero hextets
using "::". However, the current implementation accepts _zero_ or more
zero hextets as valid. Adjust the minimum required hextets for a zero
compression to 1 from 0.
Change-Id: Ibdf406b04bbdc44d4a28fafa6179c104285c915c
CRs-Fixed: 2362739
Currently there is only tso segment and tso number segment
descriptor free operation when tso preparation failed, do dma
unmap for each segment as well.
Change-Id: I9a507f27341877dc062528ce77e02970d16aa098
CRs-Fixed: 2347279
Currently there is no converged wmi_service enum for the
WMI_SERVICE_VDEV_LATENCY_CONFIG.
Add wmi_service_vdev_latency_config as the converged enum.
Change-Id: I90d54ccd507b4267cd7310b4e6e5b1473c7dc41c
CRs-Fixed: 2366187
The original definition of struct wmi_unified_pmk_cache had several
anomalies:
1) It contains an unnecessary tlv_header field. Only the fw-api
structs should contain TLV headers.
2) It contains a mis-named session_id field. Common structures should
use converged terminology, in this case vdev_id
Change If4be27111c604c16ea437aa654210cdff28220a7 ("qcacmn: Refine
struct wmi_unified_pmk_cache (phase 1)") completely addressed the
first issue, and as the first phase of fixing the second issue it
replaced the session_id field with an anonymous union which contains
both the existing session_id field and a new vdev_id field. Being part
of a union these field will overlay each other.
qca-wifi-host_cmn change Ie8cc453751b95c332e3df32794506a4bd3c324ad
("qcacmn: Refine struct wmi_unified_pmk_cache (phase 2)") and
qcacld-3.0 change Ief4bcb819cb3c842adb74904f2cb2483476eaeb9
("qcacld-3.0: Use the refined struct wmi_unified_pmk_cache") replaced
all references to session_id with references to vdev_id.
For phase 3 remove the anonymous union introduced in phase 1, leaving
just the vdev_id field.
Change-Id: Ic5a274b9e2e8e603eef801a9d6422f55829f9735
CRs-Fixed: 2363432
The original definition of struct wmi_unified_pmk_cache had several
anomalies:
1) It contains an unnecessary tlv_header field. Only the fw-api
structs should contain TLV headers.
2) It contains a mis-named session_id field. Common structures should
use converged terminology, in this case vdev_id
Change If4be27111c604c16ea437aa654210cdff28220a7 ("qcacmn: Refine
struct wmi_unified_pmk_cache (phase 1)") completely addressed the
first issue, and as the first phase of fixing the second issue it
replaced the session_id field with an anonymous union which contains
both the existing session_id field and a new vdev_id field. Being part
of a union these field will overlay each other.
For phase 2 replace the reference to session_id with a reference to
vdev_id in send_set_del_pmkid_cache_cmd_tlv().
Change-Id: Ie8cc453751b95c332e3df32794506a4bd3c324ad
CRs-Fixed: 2363431
Add support to dump only last n dpt records of debug fs
dump_set_dpt_logs file.
Change-Id: Ic6418803d53cc2abbfc200f62df2a24c3bc55d54
CRs-Fixed: 2362523
Add WMI support to send action oui DISABLE_AGGRESSIVE_TX
to firmware to disable some of aggressive tx features for peer mac
when DUT is operating in softap mode.
Aggressive TX features disabled are SIFS bursting, assist and support of
more than 32 frames in AMPDU.
Change-Id: Iaad1917a6a4897cef4d65a8951d3d1f207a9167b
CRs-Fixed: 2364937
The current definition of struct wmi_unified_pmk_cache has the
following anomalies:
1) It contains an unnecessary tlv_header field. Only the fw-api
structs should contain TLV headers.
2) It contains a mis-named session_id field. Common structures should
use converged terminology, in this case vdev_id
To fix the first issue just remove the tlv_header field since it isn't
used. To fix the second issue takes a phased approach. For phase 1
replace the session_id field with an anonymous union which contains
both the existing session_id field and a new vdev_id field. Being part
of a union these field will overlay each other.
Subsequent phases will replace session_id references with vdev_id
references, and then remove the union, leaving just the vdev_id field.
Change-Id: If4be27111c604c16ea437aa654210cdff28220a7
CRs-Fixed: 2363430
Add support for smart monitor feature on HKv2.
For HKv2, NAC filtering is done by HW and NAC is
programmed directly in the AST table. The NAC entries
in AST table have monitor direct bit set and this
is obtained by host via monitor status ring.
host subscribes for packet header in MD packets.
To these filtered packets radiotap header is added
and delivered to the stack.
Change-Id: I123f986531943e376ac5c492540e01f0b03348c4
Add APIs for t(ree) alloc(ated) memory management.
These APIs allocate memory like malloc, but track those allocations via
a parent-child relationship, or tree. If the parent is freed while it
still has children, a panic will be triggered. This effectively gives
you the ability to limit the lifetime of an allocation by ensuring the
child allocation lifetime will be strictly less than the parent
allocation lifetime.
Change-Id: I6308c96061e125b2e5a9c424ec2d2298c1c503ab
CRs-Fixed: 2359469
Add a thin wrapper in QDF around the kernel hashtable implementation.
Additionally, add basic unit tests for these APIs.
Change-Id: I07999e5fc8116e67b3850b866ced20af64342055
CRs-Fixed: 2359335
TDLS component used in CLD only and needn't in hostcmn. So there
is requirement to move it from hostcmn to CLD. This change removes
policy mgr related files/codes from hostcmn.
Change-Id: Ifeaf1447e74f83a17072d08c4a0ff62a13e91518
CRs-Fixed: 2361584
For MCL function dp_rx_process_invalid_peer, there is corner case the
nbuf is not data and freed, but invalid_peer_head_msdu pointe to the
same nbuf in pdev is not reset to NULL, then invalid_peer_head_msdu is
reused again.
Reset invalid peer msdu list to NULL when nbuf is freed.
Change-Id: I73058afe9656c34971ea083faa19ef9d90b7f747
CRs-Fixed: 2356531
During SSR test, TX skb sent to target will not get TX completion,
so skb unmap and free is missed. later when driver is unloaded,
nbuf unmap leak is detected then panic happened.
Take care to unmap and free the corresponding skb of pending TX
descriptor during vdev detach.
Change-Id: I9f4e6443682097ec76632c96a0188ffa2c1a5fcc
CRs-Fixed: 2347770
Pass vdev mac-addr and vdev-mode, instead of vdev-id.
The vdev-id that was passed earlier, was used to get
the mac-addr and vdev-mode from the vdev structure.
But there are cases when this vdev structure may be
freed, when this API is called.
So pass the mac-addr and vdev-mode from the dp structures.
Change-Id: I2148e7ecef433f4363385eeaec2e18f3ec131ab8
CRs-Fixed: 2356315
Policy mgr component used in CLD only and needn't in hostcmn. So there
is requirement to move policy mgr component from hostcmn to cld. This
change removes policy mgr related files/codes from hostcmn.
Change-Id: Ie774d526cd4aa91b16afe6e01919141b570324c4
CRs-Fixed: 2361566
Link descriptors should be returned to WBM release ring if
fragments are not reinjected due to defrag errors.
Change-Id: Ia37db9f195f6848092918cf7cc221dc50e827ac5
Update regdb with QCA regulatory database version 27.
Modify APL19 with new channels, power and radar pattern.
Change country IN to APL19_ETSIC.
Create new reg-domain ETSI15.
Create new reg-domain pair ETSI15_WORLD.
Move CTRY_SAUDI_ARABIA to ETSI15_WORLD.
Add new country CTRY_MYANMAR.
Change CTRY_CHILE to FCC13_WORLD.
Change CTL value for reg-domain APL8 to 'FCC'.
Enable all bandwidths for country CTRY_COSTA_RICA.
Add new reg-domain pair ETSI10_FCCA.
Move country CTRY_UNITED_STATES to FCC3_FCCA for mobile.
Update regdb version field.
Fix alignments.
Change-Id: I23a7ce98010e15eab606d4910df87bec15abc5ea
CRs-Fixed: 2353872
Channel number can be valid when finding out the enumeration for the
channel. Rate limit the messages for the same.
Change-Id: Id8755cffa9030054698f9e5e65c7c30c3155ad1e
CRs-Fixed: 2359311
P2P component used in CLD only, and needn't in hostcmn. So move P2P
component from hostcmn to cld. This change remove P2P related/codes
files from hostcmn.
Change-Id: I351ee153588bbcdb62041b4626370d451a3f56bb
CRs-Fixed: 2361487
Add unit tests for the following parsing function in QDF:
* qdf_int32_parse()
* qdf_int64_parse()
* qdf_uint32_parse()
* qdf_uint64_parse()
Change-Id: I43d162d008910396df051dd18e7a1ab7fede657a
CRs-Fixed: 2362740
When MEMORY_DEBUG is enabled on WIN, it is reporting qdf_aligned_malloc_fl
as an unknown symbol. qdf_aligned_malloc_fl is defined under
MEMORY_DEBUG flag but its prototype is exposed globally.
Make this function definition available globally to fix the issue.
Change-Id: Ieb002bb892d6f3d525409fc9c3a6b2fa71ceebd8
CRs-Fixed: 2357476
Remove CONFIG_WIN from spectral module to achieve maximum
possible convergence.
CRs-Fixed: 2354105
Change-Id: I59e4d8029fcf096042741573cf020136747e7367
If there is anything wrong, the caller of dp_tx_send_msdu_single
will only handle skb free, but not skb unmapping. So inside of
dp_tx_send_msdu_single, it is needed to make sure unmap operation
is performed after map operation.
CRs-Fixed: 2358266
Change-Id: I6379305e84f70b5b978e9504b758c7a6ccf328ee
Add the interface layers APIs that will be utilized by the mlme
module to interface with the serialization module.
Also add a serialization command cancel option to cancel cmds of a vdev
belonging to a given command type and define the vdev mlme legacy callback
function that will be used by the mlme-serialization interface APIs
Change-Id: I6a376465ef2929f15c6464bbd29c0250251696d8
CRs-Fixed: 2312821
Adds support to enable/disable scan for psoc/vdev with reason,
so that multiple clients can enable/disable the scan at same time.
Scan will remain disabled till all clients enable it back.
Change-Id: I8d840b24210095accb56ac9a2697ec26e8a5eb17
CRs-Fixed: 2362093
Operation classes supported can be controlled by user, which can
be sent greater than the max supported operations. This results
in stack overflow in change station command for TDLS sta.
Add check to validate operations supported param given by user
and if it exceeds max supported value, set it to max supported
value.
Change-Id: Idd3a35e38b091546a17d7ec6329f19429e5c289c
CRs-Fixed: 2361464
During vdev attachment in monitor mode, the ini_timer is not
initialzied which will cause FW assertion. Make sure int_timer
is initialized properly.
CRs-Fixed: 2359908
Change-Id: I48c97161345b17a0eb3e8a939499eabeae683bd2
qdf_mem_shared_mem_alloc invokes qdf_mem_dma_get_sgtable which will alloc
memory.
This memory should be free in qdf_mem_shared_mem_free by sg_free_table.
Change-Id: I3ad4bd2ff7a80d4051f15dcb04e0265707c2712d
CRs-Fixed: 2131270
Add WMI support to send WMI_PEER_UNMAP_CONF_CMDID to FW
for peer unmap confirmation.
Change-Id: I1a260f840ed28f90568d9cba912cc5e5128c8c7d
CRs-Fixed: 2358066
Regulatory rules bandwidth should be constrained by difference of lower and
upper bandwidth of the rule. Fix the rules that do not conform to that.
Change-Id: I01ceca977ca02dcf757c8afbb597bd1ae9659660
CRs-Fixed: 2354371
Regdb SW needs to be versioned so that implementation
can be mapped to published QCA regulatory database.
Change-Id: I925f9953f410507417747793381fd2f4b196f759
CRs-Fixed: 2354364
When from control path peer is deleted, peer deletion in progress
is set in dp for that peer. So any caller tries to get the peer
using peer id the return peer reference will be NULL as deletion
is in progress. In this case during peer deletion in progress at
tx completion process status console logs are flooded with invalid
peer logs in soft irq context. This is leading to scheduler watch
dog bite. In this change reduce the severity to prevent excessive logs.
Change-Id: Ife8f9e496b81b19666ef9e36db674106111a7d43
CRs-fixed: 2357807
Currently if the number of APs in the STA environment
are many, then the STA will receive many beacons, whose
beacon process path can take long time, in the kernel
work queue, hence the other processes have to wait
for them to complete, and may get timeout, if the
the time to process the beaocns is larger than their
process timeout.
Fix is to :-
1. Add rate limit to failure conditions of memory
not allocated
2. Make memory allocation in path of beacon process
atomic.
Change-Id: I0b15fd4924bb7d696a33adeb1875f1f9c277db18
CRs-Fixed: 2360624
ath_pktlog.ko was not being built as part of disabling
Direct Attach(DA) support.
Moved pktlog files and enabled building of ath_pktlog.ko
since pktlog files are common to both DA and offload.
Change-Id: Ibcb559832029ade94f7215ce633cb6dbc83f747e
Function send_pdev_set_dual_mac_config_cmd_tlv return success even
if it fails to send WMI_PDEV_SET_MAC_CONFIG_CMDID. Thus the
e_sme_command_set_dual_mac_config cmd stuck in active queue leading
to active command timeout.
Return failure if WMI_PDEV_SET_MAC_CONFIG_CMDID fails.
Change-Id: I9593c7369a4e152c8c233e60216ecd7fc301b944
CRs-Fixed: 2362270
WMI RX workqueue is created with WQ_MEM_RECLAIM flag. When host receives
the WMI service ready event it queues the work. There is 50sec delay in
scheduling workqueue to process WMI service ready event. This results in
host timeout (timeout = 15sec) and wifi load failure. This cleans up the
host data structures related to data path. But work got scheduled after
50sec resulting in init path handling with inconsistent data structures.
Use workqueue UNBOUND flag to create WMI RX workqueue. Works queued to
unbound workqueues are implicitly HIGHPRI and dispatched to unbound
workers as soon as resources are available.
Change-Id: I46eb0242ad88103268df99be9fd2e0759ebec4b2
CRs-Fixed: 2343181
