WSA macro supports both ec_legacy and ec_hq.
Add support to capture echo for both types
based on mixer control value.
Change-Id: I3c8a6cd13dabbee3f3687d5e63dc6d4c7bbc4eef
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support for DMICs of different sampling rates
with respective clk_div config update in VA macro
register.
Change-Id: I8faa46774cf1fe561af3bd7a284bc7d37f85cb9d
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support for regulator enable and disable to
source micbias for VA digital mics.
Change-Id: Ie25fb65103704b04127b23f4c515d6d270f4abf0
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Fix codec dma dai ids in machine driver same
as ids present in DT files.
CRs-Fixed: 2248380
Change-Id: I48d121e7343a695d67fc82da0a5c335970ccb819
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Existing software supports only high AANC level with minimum noise.
Requirement is to support different noise levels when AANC is
enabled for better AANC effect.
Change-Id: I343d00473937f68eb86533e88b25083d554b79b1
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
The SVA history buffer is out of order if there are
more than 2 continuous RX buffer done from GLINK. Implement
FIFO to ensure sequence consistency.
Change-Id: If70e2d0160e8f3140d621298b0db03bd89ba88ba
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Update module id used in get/set for sound focus and source tracking.
CRs-Fixed: 2262638
Change-Id: Ieb35c12b8f6ec8a5db6f699f70bf85ef29b29178
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Update apr header packet size in get pp params.
Add header field for the apr packet.
Update the check condition to differentiate between
in-band and out-band case in adm callback.
CRs-Fixed: 2262638
Change-Id: I57ef88e0638c09b203503f4c1cff2f810ef51c6e
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add codec entry for bolero codec under proc codecs list.
Update the names of wsa-macro gain offset and mode for
wsa8810 variant to avoid conflict with wcd9335.
Change-Id: Icaa2ef7c2f7253060cd7cccd44130b0b12dc0713
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
In vipertooth, both wsa-macro and wcd9335 are present.
wcd9335 doesn't have wsa attached, and wsa-macro supports wsa
attached which defines spkr wsa controls. wcd9335 driver needs to
avoid register same controls if wsa is not attached to it.
Change-Id: Ia3db8982b5214ade95e6d8f27a44a68e20b772a0
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
With pre-processing applied, it is possible that the processed
number of channels could be different than the number of channels
that voice wakeup can run with. In such cases, the channel mixer
should be setup to downmix the channel. For voice wakeup to detect
keywords properly, preprocessed channels cannot be mixed hence
the channel mixer is always setup with unity co-efficients or 0
to either select or drop the channel. In this case the channel mixer
acts more like an channel selector.
Change-Id: I79b578b56ad5484e27f433404a5371540618a2ae
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Based on the type of pre/post processing, it is possible that
the processed channel count could be different from the input
channel count. As an example, the FFECNS processing block
could accept 3 channel input and has the ability to output
upto 9 channels of processed data. In cases like these, the
stream side needs to know the processed channel count to set
up its own configuration. Change adds functionality in
routing driver to read the processed channel count.
Change-Id: I06c365f8c53270712709631bc23649d37434f405
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Add support to dynamically configure channel mixing weightage
coefficients for both ASM and LSM sessions.
Currently the code is executed only for LSM session and can be
extended to ASM as well.
Change-Id: I727ea6fa2d3a99bbf6811005c5733535f680891b
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
It is required to know the number of output channels for any
particular app_type so that channel mixing can be performed
if the channels do not match as that of the listen stream.
Add new Listen app type config V2 mixer control that reads the
num_out_channels field along with the others.
Change-Id: I49a74004e12dfa5a4c1ebaac4ac065acc6ff5bc3
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
ADM supports certain modules that can have very large calibration sizes,
in such cases the calibration is expected to be persistent in memory.
Add new cal type for this purpose.
Change-Id: Ieb2e941036595b7dff4b8bfb341f2ec152cf648a
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
New cal type ADM_LSM_AUDPROC_PERSISTENT is added to enable
the larger calibration sizes for ADM that need to be kept
persistent in memory.
Change-Id: Ie23f52d6aad45dc1133a4a6fa692c1331b93d3e8
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
With multichannel voice activation support in LSM, it could be possible
that the input media format/hw_params to LSM would be different than
the output media format/hw_params. This change decouples the input
and output hw_params for LSM. The output hw_params are obtained through
ALSA pcm_hw_params operation, whereas the input hw_params are obtained
though the LSM_SET_INPUT_HW_PARAMS ioctl to LSM.
At the same time, the below parameter IDs are added to send the channel
information to LSM service:
- LSM_PARAM_ID_MEDIA_FMT_V2
- LSM_PARAM_ID_LAB_OUTPUT_CHANNEL_CONFIG
Change-Id: Ie53a087b0ec54e83c4eba93a0828f9bdd6cc147d
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Fix proper name for rx1 dp port widget for
proper registration of the dp route.
Change-Id: I31894c0b1f66ed8848f533728f3ca07ec9fefd34
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
In order to support variable lpi offsets from different chipsets
read the lpi offset values of gpio groups from device tree. Any
target which uses LPI has to define this gpio offset table
in device tree.
Change-Id: I3bd54017e4571deb9a189cfd6903698887a6413a
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Update vipertooth auto conf files to include new
soundwire master
Change-Id: I1854e392cc376aec0eb36147231a8e38127b4102
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Add new kconfig to control compilation of new soundwire driver
Change-Id: I6eb8b30de9f6dc2ffa152b6dfffbc2b02d0a990c
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
