[ Upstream commit ecba852dc9f4993f4f894ea1f352564560e19a3e ]
Change "ret" from u8 to int type in redrat3_enable_detector() to store
negative error codes or zero returned by redrat3_send_cmd() and
usb_submit_urb() - this better aligns with the coding standards and
maintains code consistency.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c02ea544ac35a9def5827d30594406947ccd81a ]
The MAC can't facilitate WoL if the system can't go to sleep. Gate the
WoL support callbacks in ethtool at compile time using CONFIG_PM_SLEEP.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250909085849.3808169-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43bd2c44515f8ee5c019ce6e6583f5640387a41b ]
Enable support for data lane rates between 80-160 Mbps cdns dphy
as mentioned in TRM [0] by setting the pll_opdiv field to 16.
This change enables lower resolutions like 640x480 at 60Hz.
[0]: https://www.ti.com/lit/zip/spruil1
(Table 12-552. DPHY_TX_PLL_CTRL Register Field Descriptions)
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Link: https://lore.kernel.org/r/20250807052002.717807-1-h-shenoy@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed6f727c575b1eb8136e744acfd5e7306c9548f6 ]
Set the hid req->zero flag of ep0/in_ep to true by default,
then the UDC drivers can transfer a zero length packet at
the end if the hid transfer with size divisible to EPs max
packet size according to the USB 2.0 spec.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Link: https://lore.kernel.org/r/1756204087-26111-1-git-send-email-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a73349c5dd27bc544b048e2e2c8ef6394f05b793 ]
It reports a MIN value -15360 for volume control, but will mute when
setting it less than -14208
Tested-by: Guoli An <anguoli@uniontech.com>
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250903-sound-v1-4-d4ca777b8512@uniontech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21f82062d0f241e55dd59eb630e8710862cc90b4 ]
An exchange with a NFC target must complete within NCI_DATA_TIMEOUT.
A delay of 700 ms is not sufficient for cryptographic operations on smart
cards. CardOS 6.0 may need up to 1.3 seconds to perform 256-bit ECDH
or 3072-bit RSA. To prevent brute-force attacks, passports and similar
documents introduce even longer delays into access control protocols
(BAC/PACE).
The timeout should be higher, but not too much. The expiration allows
us to detect that a NFC target has disappeared.
Signed-off-by: Juraj Šarinay <juraj@sarinay.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250902113630.62393-1-juraj@sarinay.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e742de97c806a4048418237ef1283e7d71eaf4b ]
DMA Engine has support for the callback_result which provides
the status of the request and the residue. This helps in
determining the correct status of the request and in
efficient resource management of the request.
The 'callback_result' method is preferred over the deprecated
'callback' method.
Signed-off-by: Devendra K Verma <devverma@amd.com>
Link: https://lore.kernel.org/r/20250821121505.318179-1-devverma@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9a3e9929452780df16f3414f0d59b5f69d058cf ]
This patch modifies the type of setup_xref from void to int and handles
errors since the function can fail.
`setup_xref` now returns the (eventual) error from
`dmae_set_dmars`|`dmae_set_chcr`, while `shdma_tx_submit` handles the
result, removing the chunks from the queue and marking PM as idle in
case of an error.
Signed-off-by: Thomas Andreatta <thomas.andreatta2000@gmail.com>
Link: https://lore.kernel.org/r/20250827152442.90962-1-thomas.andreatta2000@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bee3554d1a4efbce91d6eca732f41b97272213a5 ]
Use int instead of u32 for 'ret' variable to store negative error codes
returned by PM8001_CHIP_DISP->set_nvmd_req().
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250826093242.230344-1-rongqianfeng@vivo.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0d04fe6a633ada2c7bc1b5ddd011cbd85961868 ]
Bindig requires a node name matching ‘^gpio@[0-9a-f]+$’. This patch
changes the clock name from “stp” to “gpio”.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d66949a1875352d2ddd52b144333288952a9e36f ]
This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: pci@e105400 (lantiq,pci-xway): 'device_type' is a required property
from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml#
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8dee66c37085dc9858eb8608bc783c2900e50e7 ]
This fixes the following warnings:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: cpus: '#address-cells' is a required property
from schema $id: http://devicetree.org/schemas/cpus.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: cpus: '#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/cpus.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: cpu@0 (mips,mips24Kc): 'reg' is a required property
from schema $id: http://devicetree.org/schemas/mips/cpus.yaml#
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3820e9d356132e18405cd7606e22dc87ccfa6d1 ]
When KFD asks CP to preempt queues, other than preempt CP queues, CP
also requests SDMA to preempt SDMA queues with UNMAP_LATENCY timeout.
Currently queue_preemption_timeout_ms is 9000 ms by default but can be
configured via module parameter. KFD_UNMAP_LATENCY_MS is hard coded as
4000 ms though. This patch ties KFD_UNMAP_LATENCY_MS to
queue_preemption_timeout_ms so in a slow system such as emulator, both
CP and SDMA slowness are taken into account.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78b6a991eb6c6f19ed7d0ac91cda3b3b117fda8f ]
Device can be unbound, so driver must also release memory for the wakeup
source. Do not use devm interface, because it would change the order of
cleanup.
Link: https://lore.kernel.org/lkml/20250501-device-wakeup-leak-extcon-v2-1-7af77802cbea@linaro.org/
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6238784e502b6a9fbeb3a6b77284b29baa4135cc ]
The error handling path in pci_p2pdma_add_resource() contains a bug in its
`pgmap_free` label.
Memory is allocated for the `p2p_pgmap` struct, and the pointer is stored
in `p2p_pgmap`. However, the error path calls devm_kfree() with `pgmap`,
which is a pointer to a member field within the `p2p_pgmap` struct, not the
base pointer of the allocation.
Correct the bug by passing the correct base pointer, `p2p_pgmap`, to
devm_kfree().
Signed-off-by: Sungho Kim <sungho.kim@furiosa.ai>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patch.msgid.link/20250820105714.2939896-1-sungho.kim@furiosa.ai
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d85c565a7b7c78b732393c02bcaa4d5c275fe58 ]
Initially, trace_sock_exceed_buf_limit() was invoked when
__sk_mem_raise_allocated() failed due to the memcg limit or the
global limit.
However, commit d6f19938eb ("net: expose sk wmem in
sock_exceed_buf_limit tracepoint") somehow suppressed the event
only when memcg failed to charge for SK_MEM_RECV, although the
memcg failure for SK_MEM_SEND still triggers the event.
Let's restore the event for SK_MEM_RECV.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0ac6d3b56a2384db151696cfda2836a8a961b6d ]
When removing a nexthop, commit
90f33bffa382 ("nexthops: don't modify published nexthop groups") added a
call to synchronize_rcu() (later changed to _net()) to make sure
everyone sees the new nexthop-group before the rtnl-lock is released.
When one wants to delete a large number of groups and nexthops, it is
fastest to first flush the groups (ip nexthop flush groups) and then
flush the nexthops themselves (ip -6 nexthop flush). As that way the
groups don't need to be rebalanced.
However, `ip -6 nexthop flush` will still take a long time if there is
a very large number of nexthops because of the call to
synchronize_net(). Now, if there are no more groups, there is no point
in calling synchronize_net(). So, let's skip that entirely by checking
if nh->grp_list is empty.
This gives us a nice speedup:
BEFORE:
=======
$ time sudo ip -6 nexthop flush
Dump was interrupted and may be inconsistent.
Flushed 2097152 nexthops
real 1m45.345s
user 0m0.001s
sys 0m0.005s
$ time sudo ip -6 nexthop flush
Dump was interrupted and may be inconsistent.
Flushed 4194304 nexthops
real 3m10.430s
user 0m0.002s
sys 0m0.004s
AFTER:
======
$ time sudo ip -6 nexthop flush
Dump was interrupted and may be inconsistent.
Flushed 2097152 nexthops
real 0m17.545s
user 0m0.003s
sys 0m0.003s
$ time sudo ip -6 nexthop flush
Dump was interrupted and may be inconsistent.
Flushed 4194304 nexthops
real 0m35.823s
user 0m0.002s
sys 0m0.004s
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250816-nexthop_dump-v2-2-491da3462118@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ba0fb42aa6a5f072b1b8c0b0520b32ad4ef4b45 ]
misc_open() may request module for miscdevice with dynamic minor, which
is meaningless since:
- The dynamic minor allocated is unknown in advance without registering
miscdevice firstly.
- Macro MODULE_ALIAS_MISCDEV() is not applicable for dynamic minor.
Fix by only requesting module for miscdevice with fixed minor.
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250714-rfc_miscdev-v6-6-2ed949665bde@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 956606bafb5fc6e5968aadcda86fc0037e1d7548 ]
This fix is already present in f_ecm.c and was never
propagated to f_ncm.c
When creating multiple NCM ethernet devices
on a composite usb gadget device
each MAC address on the HOST side will be identical.
Having the same MAC on different network interfaces is bad.
This fix updates the MAC address inside the
ncm_strings_defs global during the ncm_bind call.
This ensures each device has a unique MAC.
In f_ecm.c ecm_string_defs is updated in the same way.
The defunct MAC assignment in ncm_alloc has been removed.
Signed-off-by: raub camaioni <raubcameo@gmail.com>
Link: https://lore.kernel.org/r/20250815131358.1047525-1-raubcameo@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d75c7021c08e8ae3f311ef2464dca0eaf75fab9f ]
avg sample info is a bit field coded inside the following
bits: 5,6,7 and 8 of a device status register.
Channel num info the same, but over bits: 1, 2 and 3.
Mask both values in order to avoid touching other register bits,
since the first info (avg sample), came from DT.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250717221559.158872-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eecd203ada43a4693ce6fdd3a58ae10c7819252c ]
syzbot is reporting that imon has three problems which result in
hung tasks due to forever holding device lock [1].
First problem is that when usb_rx_callback_intf0() once got -EPROTO error
after ictx->dev_present_intf0 became true, usb_rx_callback_intf0()
resubmits urb after printk(), and resubmitted urb causes
usb_rx_callback_intf0() to again get -EPROTO error. This results in
printk() flooding (RCU stalls).
Alan Stern commented [2] that
In theory it's okay to resubmit _if_ the driver has a robust
error-recovery scheme (such as giving up after some fixed limit on the
number of errors or after some fixed time has elapsed, perhaps with a
time delay to prevent a flood of errors). Most drivers don't bother to
do this; they simply give up right away. This makes them more
vulnerable to short-term noise interference during USB transfers, but in
reality such interference is quite rare. There's nothing really wrong
with giving up right away.
but imon has a poor error-recovery scheme which just retries forever;
this behavior should be fixed.
Since I'm not sure whether it is safe for imon users to give up upon any
error code, this patch takes care of only union of error codes chosen from
modules in drivers/media/rc/ directory which handle -EPROTO error (i.e.
ir_toy, mceusb and igorplugusb).
Second problem is that when usb_rx_callback_intf0() once got -EPROTO error
before ictx->dev_present_intf0 becomes true, usb_rx_callback_intf0() always
resubmits urb due to commit 8791d63af0 ("[media] imon: don't wedge
hardware after early callbacks"). Move the ictx->dev_present_intf0 test
introduced by commit 6f6b90c923 ("[media] imon: don't parse scancodes
until intf configured") to immediately before imon_incoming_packet(), or
the first problem explained above happens without printk() flooding (i.e.
hung task).
Third problem is that when usb_rx_callback_intf0() is not called for some
reason (e.g. flaky hardware; the reproducer for this problem sometimes
prevents usb_rx_callback_intf0() from being called),
wait_for_completion_interruptible() in send_packet() never returns (i.e.
hung task). As a workaround for such situation, change send_packet() to
wait for completion with timeout of 10 seconds.
Link: https://syzkaller.appspot.com/bug?extid=592e2ab8775dbe0bf09a [1]
Link: https://lkml.kernel.org/r/d6da6709-d799-4be3-a695-850bddd6eb24@rowland.harvard.edu [2]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2327a3d6f65ce2fe2634546dde4a25ef52296fec ]
Fix field-spanning memcpy warnings in ah6_output() and
ah6_output_done() where extension headers are copied to/from IPv6
address fields, triggering fortify-string warnings about writes beyond
the 16-byte address fields.
memcpy: detected field-spanning write (size 40) of single field "&top_iph->saddr" at net/ipv6/ah6.c:439 (size 16)
WARNING: CPU: 0 PID: 8838 at net/ipv6/ah6.c:439 ah6_output+0xe7e/0x14e0 net/ipv6/ah6.c:439
The warnings are false positives as the extension headers are
intentionally placed after the IPv6 header in memory. Fix by properly
copying addresses and extension headers separately, and introduce
helper functions to avoid code duplication.
Reported-by: syzbot+01b0667934cdceb4451c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=01b0667934cdceb4451c
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d05b24429e1de7a17c8fdccb04a04dbc8ad297b ]
If a backup port is configured for a bridge port, the bridge will
redirect known unicast traffic towards the backup port when the primary
port is administratively up but without a carrier. This is useful, for
example, in MLAG configurations where a system is connected to two
switches and there is a peer link between both switches. The peer link
serves as the backup port in case one of the switches loses its
connection to the multi-homed system.
In order to avoid flooding when the primary port loses its carrier, the
bridge does not flush dynamic FDB entries pointing to the port upon STP
disablement, if the port has a backup port.
The above means that known unicast traffic destined to the primary port
will be blackholed when the port is put administratively down, until the
FDB entries pointing to it are aged-out.
Given that the current behavior is quite weird and unlikely to be
depended on by anyone, amend the bridge to redirect to the backup port
also when the primary port is administratively down and not only when it
does not have a carrier.
The change is motivated by a report from a user who expected traffic to
be redirected to the backup port when the primary port was put
administratively down while debugging a network issue.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250812080213.325298-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 704e5dd1c02371dfc7d22e1520102b197a3b628b ]
Ever since uevent support was added for AER and EEH with commit
856e1eb9bd ("PCI/AER: Add uevents in AER and EEH error/resume"), it
reported PCI_ERS_RESULT_NONE as uevent when recovery begins.
Commit 7b42d97e99 ("PCI/ERR: Always report current recovery status for
udev") subsequently amended AER to report the actual return value of
error_detected().
Make the same change to EEH to align it with AER and s390.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/linux-pci/aIp6LiKJor9KLVpv@wunner.de/
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Link: https://patch.msgid.link/20250807-add_err_uevents-v5-3-adf85b0620b0@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ba38a7a9a699905b84fa97578a8291010dec273 ]
emulate_vsyscall() expects to see X86_PF_INSTR in PFEC on a vsyscall
page fault, but the CPU does not report X86_PF_INSTR if neither
X86_FEATURE_NX nor X86_FEATURE_SMEP are enabled.
X86_FEATURE_NX should be enabled on nearly all 64-bit CPUs, except for
early P4 processors that did not support this feature.
Instead of explicitly checking for X86_PF_INSTR, compare the fault
address to RIP.
On machines with X86_FEATURE_NX enabled, issue a warning if RIP is equal
to fault address but X86_PF_INSTR is absent.
[ dhansen: flesh out code comments ]
Originally-by: Dave Hansen <dave.hansen@intel.com>
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Link: https://lore.kernel.org/all/bd81a98b-f8d4-4304-ac55-d4151a1a77ab@intel.com
Link: https://lore.kernel.org/all/20250624145918.2720487-1-kirill.shutemov%40linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc6e8d1ccea792d8550428e0831e3a35b0ccfddc ]
The ivtv driver has a structure named ivtv_open_id that models an open
file handle for the device. It embeds a v4l2_fh instance for file
handles that correspond to a V4L2 video device, and stores a pointer to
that v4l2_fh in struct ivtv_stream to identify which open file handle
owns a particular stream.
In addition to video devices, streams can be owned by ALSA PCM devices.
Those devices do not make use of the v4l2_fh instance for obvious
reasons, but the snd_ivtv_pcm_capture_open() function still initializes
a "fake" v4l2_fh for the sole purpose of using it as an open file handle
identifier. The v4l2_fh is not properly destroyed when the ALSA PCM
device is closed, leading to possible resource leaks.
Fortunately, the v4l2_fh instance pointed to by ivtv_stream is not
accessed, only the pointer value is used for comparison. Replace it with
a pointer to the ivtv_open_id structure that embeds the v4l2_fh, and
don't initialize the v4l2_fh for ALSA PCM devices.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57af162bfc8c05332a28c4d458d246cc46d2746d ]
Some kfd ioctls may not be available depending on the kernel version the
user is running, as such we need to report -ENOTTY so userland can
determine the cause of the ioctl failure.
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc4c0a48bdad7f225740b8e750fdc1da6d85e1eb ]
The get_next_frame() function in psock_tpacket.c was missing a return
statement in its default switch case, leading to a compiler warning.
This was caused by a `bug_on(1)` call, which is defined as an
`assert()`, being compiled out because NDEBUG is defined during the
build.
Instead of adding a `return NULL;` which would silently hide the error
and could lead to crashes later, this change restores the original
author's intent. By adding `#undef NDEBUG` before including <assert.h>,
we ensure the assertion is active and will cause the test to abort if
this unreachable code is ever executed.
Signed-off-by: Wake Liu <wakel@google.com>
Link: https://patch.msgid.link/20250809062013.2407822-1-wakel@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c36748e8733ef9c5f4cd1d7c4327994e5b88b8df ]
The `__WORDSIZE` macro, defined in the non-standard `<bits/wordsize.h>`
header, is a GNU extension and not universally available with all
toolchains, such as Clang when used with musl libc.
This can lead to build failures in environments where this header is
missing.
The intention of the code is to determine the bit width of a C `long`.
Replace the non-portable `__WORDSIZE` with the standard and portable
`sizeof(long) * 8` expression to achieve the same result.
This change also removes the inclusion of the now-unused
`<bits/wordsize.h>` header.
Signed-off-by: Wake Liu <wakel@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebc7086b39e5e4f3d3ca82caaea20538c9b62d42 ]
RDC PCI to PCIe bridges, present on Vortex86DX3 and Vortex86EX2 SoCs, do
not support MSIs. If enabled, interrupts generated by PCIe devices never
reach the processor.
I have contacted the manufacturer (DM&P) and they confirmed that PCI MSIs
need to be disabled for them.
Signed-off-by: Marcos Del Sol Vives <marcos@orca.pet>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250705233209.721507-1-marcos@orca.pet
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6510b62fe9303aaf48ff136ff69186bcfc32172d ]
snprintf() returns the number of characters that *would* have been
written, which can overestimate how much you actually wrote to the
buffer in case of truncation. That leads to 'data += this' advancing
the pointer past the end of the buffer and size going negative.
Switching to scnprintf() prevents potential buffer overflows and ensures
consistent behavior when building the output string.
Signed-off-by: Seyediman Seyedarab <ImanDevel@gmail.com>
Link: https://lore.kernel.org/r/20250724195913.60742-1-ImanDevel@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 364752aa0c6ab0a06a2d5bfdb362c1ca407f1a30 ]
clang-21 warns about one uninitialized variable getting dereferenced
in madera_dev_init:
drivers/mfd/madera-core.c:739:10: error: variable 'mfd_devs' is uninitialized when used here [-Werror,-Wuninitialized]
739 | mfd_devs, n_devs,
| ^~~~~~~~
drivers/mfd/madera-core.c:459:33: note: initialize the variable 'mfd_devs' to silence this warning
459 | const struct mfd_cell *mfd_devs;
| ^
| = NULL
The code is actually correct here because n_devs is only nonzero
when mfd_devs is a valid pointer, but this is impossible for the
compiler to see reliably.
Change the logic to check for the pointer as well, to make this easier
for the compiler to follow.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250807071932.4085458-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00ea54f058cd4cb082302fe598cfe148e0aadf94 ]
This driver is licensed GPL-2.0-only, so add the corresponding module flag.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250725071153.338912-3-alexander.stein@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57bf2a312ab2d0bc8ee0f4e8a447fa94a2fc877d ]
The IRQ domain is (optionally) added during stmpe_probe, but never removed.
Add the call to stmpe_remove.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250725070752.338376-1-alexander.stein@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2734fdbc9bb8a3aeb309ba0d62212d7f53f30bc7 ]
When we are successful in using cpufreq min/max limits,
skip setting the raw MSR limits entirely.
This is necessary to avoid undoing any modification that
the cpufreq driver makes to our sysfs request.
eg. intel_pstate may take our request for a limit
that is valid according to HWP.CAP.MIN/MAX and clip
it to be within the range available in PLATFORM_INFO.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c97c057d357c4b39b153e9e430bbf8976e05bd4e ]
On enabling HWP, preserve the reserved bits in MSR_PM_ENABLE.
Also, skip writing the MSR_PM_ENABLE if HWP is already enabled.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23199d2aa6dcaf6dd2da772f93d2c94317d71459 ]
Fix incorrect size parameter passed to cpuidle_state_write_file() in
cpuidle_state_disable().
The function was incorrectly using sizeof(disable) which returns the
size of the unsigned int variable (4 bytes) instead of the actual
length of the string stored in the 'value' buffer.
Since 'value' is populated with snprintf() to contain the string
representation of the disable value, we should use the length
returned by snprintf() to get the correct string length for
writing to the sysfs file.
This ensures the correct number of bytes is written to the cpuidle
state disable file in sysfs.
Link: https://lore.kernel.org/r/20250917050820.1785377-1-kaushlendra.kumar@intel.com
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53d3bd48ef6ff1567a75ca77728968f5ab493cb4 ]
The Dell OptiPlex 7040 supports the legacy SMM interface for reading
sensors and performing fan control. Whitelist this machine so that
this driver loads automatically.
Closes: https://github.com/Wer-Wolf/i8kutils/issues/15
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250917181036.10972-5-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4363264111e1297fa37aa39b0598faa19298ecca ]
If uprobe handler changes instruction pointer we still execute single
step) or emulate the original instruction and increment the (new) ip
with its length.
This makes the new instruction pointer bogus and application will
likely crash on illegal instruction execution.
If user decided to take execution elsewhere, it makes little sense
to execute the original instruction, so let's skip it.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b781f527d6f99e68e5b3780ae03cd69a7cb5c0c ]
The driver uses the raw_readl() and raw_writel() functions. Those are
not for MMIO devices. Replace them with readl() and writel()
[ dlezcano: Fixed typo in the subject s/reald/readl/ ]
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250804152344.1109310-2-daniel.lezcano@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07c7efda24453e05951fb2879f5452b720b91169 ]
According to LP8556 datasheet EPROM region starts at 0x98 so adjust value
in the driver accordingly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250909074304.92135-2-clamor95@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dbcd5a9ab6cb6644e7d728521da1c9035ec7235 ]
A TEE driver doesn't always need to provide a pool if it doesn't
support memory sharing ioctls and can allocate memory for TEE
messages in another way. Although this is mentioned in the
documentation for tee_device_alloc(), it is not handled correctly.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9dff11a7a50fcef23fe3e8314fafae6d5641826 ]
When deleting the previous walkstate operand stack
acpi_ds_call_control_method() was deleting obj_desc->Method.param_count
operands. But Method.param_count does not necessarily match
this_walk_state->num_operands, it may be either less or more.
After correcting the for loop to check `i < this_walk_state->num_operands`
the code is identical to acpi_ds_clear_operands(), so just outright
replace the code with acpi_ds_clear_operands() to fix this.
Link: 53fc0220
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08b68ca543ee9d5a8d2dc406165e4887dd8f170b ]
For Qualcomm SoCs which needs level shifter for SD card, extra delay is
seen on receiver data path.
To compensate this delay enable tuning for SDR50 mode for targets which
has level shifter. SDHCI_SDR50_NEEDS_TUNING caps will be set for targets
with level shifter on Qualcomm SOC's.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ef3886ce626dcdab0cbc452dbbebc19f57133d8 ]
The PCI Local Bus Specification 3.0 (section 6.8.1.6) allows modifying the
low-order bits of the MSI Message DATA register to encode nr_irqs interrupt
numbers in the log2(nr_irqs) bits for the domain.
The problem arises if the base vector (GICV2m base spi) is not aligned with
nr_irqs; in this case, the low-order log2(nr_irqs) bits from the base
vector conflict with the nr_irqs masking, causing the wrong MSI interrupt
to be identified.
To fix this, use bitmap_find_next_zero_area_off() instead of
bitmap_find_free_region() to align the initial base vector with nr_irqs.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250902091045.220847-1-christian.bruel@foss.st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3fecb9160482367365cc384c59dd220b162b066 ]
While tracking down a problem where constant expressions used by
BUILD_BUG_ON() suddenly stopped working[1], we found that an added static
initializer was convincing the compiler that it couldn't track the state
of the prior statically initialized value. Tracing this down found that
ffs() was used in the initializer macro, but since it wasn't marked with
__attribute__const__, the compiler had to assume the function might
change variable states as a side-effect (which is not true for ffs(),
which provides deterministic math results).
For arc architecture with CONFIG_ISA_ARCV2=y, the __fls() function
uses __builtin_arc_fls() which lacks GCC's const attribute, preventing
compile-time constant folding, and KUnit testing of ffs/fls fails on
arc[3]. A patch[2] to GCC to solve this has been sent.
Add a fix for this by handling compile-time constants with the standard
__builtin_clzl() builtin (which has const attribute) while preserving
the optimized arc-specific builtin for runtime cases. This has the added
benefit of skipping runtime calculation of compile-time constant values.
Even with the GCC bug fixed (which is about "attribute const") this is a
good change to avoid needless runtime costs, and should be done
regardless of the state of GCC's bug.
Build tested ARCH=arc allyesconfig with GCC arc-linux 15.2.0.
Link: https://github.com/KSPP/linux/issues/364 [1]
Link: https://gcc.gnu.org/pipermail/gcc-patches/2025-August/693273.html
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508031025.doWxtzzc-lkp@intel.com/ [3]
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
