qti_glink_charger is moto common module, it is used by several
moto projects(berlin/yukon/rouge)
the new property type must be add to the end, otherwise it will
affect other projects.
Change-Id: Icaa0e121b3efdf11dbf712eb06011ad5941f6929
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2061419
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
GKI kernel build may error since spi_set_cs_timing
is not in google whitelist
upgrade as kernel verion
Change-Id: I1ea0b1e23c15fd218ff0a2aee5f584f2cbf0dcc4
Reviewed-on: https://gerrit.mot.com/2060952
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ningkai Zhuang <zhuangnk1@lenovo.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
It takes long time to include all DLKM's makefile even if the
product does not need this module.
Change-Id: I8629ac29a3f7e115c04dc24d2508366314716dac
Signed-off-by: qianlong <qianl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2059989
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
Add fet control to enable low-z batt2 path after both batteries
have had tome to equalize under the balance_en_n setting.
EVB does not have an adc-in to read batt2 level directly, support
will be added on EVT1 hw. So until then, check for vbatt_main at
mid Voltage to cutover the battplus_en path, while current is low
i.e. < 250mA.
Change-Id: I53f5c13c881dd0cf0cf93af8c153f866dfcfad6d
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/2057382
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
add usb property
for other modules to get usb state
Change-Id: I7c6c15ebd1612990f07738ce4c6374857013b44e
Signed-off-by: mahj8 <mahj8@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2059196
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Add support for a vendor specific SCSI pass through command to
trigger reboot.
SC_REBOOT (0xd7) - triggers reboot into fastboot mode
SC_REBOOT_1 (0xd8) - triggers reboot into normal mode.
Propagated from (CR)
Change-Id: I4fc4839968135a63c594dca69b1dc93699e4a9bc
Reviewed-on: https://gerrit.mot.com/1750946
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zonghua Liu <a17671@motorola.com>
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/2053807
Reviewed-by: Xiaojun Ji <jixj@motorola.com>
Modify the mass storage driver to build as a Motorola module
following Android GKI rule.
Change-Id: I278ce964d1689fb8dbf0df7b7e098e210d664565
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2053806
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Reviewed-by: Xiaojun Ji <jixj@motorola.com>
Submit-Approved: Jira Key
Copy the mass_storage driver from Kernel source as initial version
of Motorola mass storage base.
Change-Id: I0d95b47de5c1463164843d9e8cebce06e9492e52
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2053805
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiaojun Ji <jixj@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Submit-Approved: Jira Key
Added self-test capabilities: full raw data, SNR and draw line.
Added sysfs interfaces to support IC version and firmware update
Change-Id: I93359b60354e728853a7e43a3ca2fb71c1953987
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/2041728
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
TP:
Delete the symbol ^M at the end of each line of the driver code.
Change-Id: Icf5b64b01ae3c27c1d942e0d0d02056f32cb41c8
Reviewed-on: https://gerrit.mot.com/2038562
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Egis:
Update the poll mask when polling is aborted by hal to support polling
wait forever. do not impact previous 30ms polling mechanism.
Change-Id: I1f6a2adb38f0282e944dde60539cd51179f5c733
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2053956
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
If disable pm7250b aicl will cause a issue: battery voltage
will reverse to vbus side after remove usb cable.
so add a flag to enalbe aicl for some products.
Change-Id: Ide22d43546ffe8ad97b8179aede243f71fe1d246
Reviewed-on: https://gerrit.mot.com/2052603
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
sometimes allow min pps charge dapter out current is not
same as typec_middle_current,so define a variable for
pps charge adapter allow min out current.
Change-Id: I2f303ec5040b0effd451917e16fffe75bc5932b3
Reviewed-on: https://gerrit.mot.com/2045078
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
- If we do not set the irq to wakeable, single tap to wake may not wake up the AP,
so add the corresponding change for fix this issue.
Change-Id: Ic44a6339d21c64e2d1ca456bc4e4f021aa11e2e7
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2038950
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Add glink oem command to get LPD info so as to show
the LPD information in AP log.
Change-Id: Ib9ce1fb89d626cde0465179a216028bd8abbdd5f
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2037809
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
8450 platform bl build sig num is 17.
xbl_config.git will be lost if MAX_BL_BUILD_SIG isn't increased.
Change-Id: I03f1830bf62d824d6618ef533aaa149aa5991c9b
Signed-off-by: wangxs8 <wangxs8@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2037542
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
- Since now we having display/touch current drain issue when suspend,
so need to set rst pin to low when suspend and add reset process to
change rst pin to high when resume.
- For compatibility with other projects, add macro ILITEK_SUSPEND_PWROFF
to control this function.
Change-Id: Iab7d65adf820ccfdb4c3e50d7a5bdff624097694
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2035322
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
