Reconfigure the charger when charger IC reset
or user input.
Change-Id: I71f910b122fd1e64c22521bc4cf72dfb3dae7ee1
Reviewed-on: https://gerrit.mot.com/2427353
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
get tx_mode status by accessing qti_glink
notify tx_mode when it changed
Change-Id: I325c1982141f7095548857d39fc38b5d8e6f2a5f
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2418046
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Introducing a semi-permanent faulting state to stop motor and prevent
any future movements when destination cannot be reached based on data from
sensors. In previous experience it usually happens due to sensors calibration
issues. In this case we want cease all further motor movements and
provide a way to drive motor manually to perform proper sensors
calibration.
Change-Id: I97ccadb69fe569d2b9770d4999eed36fa1a5d0eb
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/2414475
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
When the user sets the input current limit or constant
charge current through sysnodes, these values are fixed
and do not charge with other logic.
Change-Id: Iea171ce60ab6e1c1605a7dc89aadaecaecaba4c1
Reviewed-on: https://gerrit.mot.com/2423701
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Heartbeat work in charger driver will work every 100s when no charging.
It will cost some power.
But when discharging, we do not need to pay attention to charging
function, we just need soc changing.
And for our test in genevn, fg driver will send a notification when soc
changed. So we could increase the period of heartbeat wor
Change-Id: I9f9dcda52f42bbb53bcff61820e1df9ab07e4f15
Reviewed-on: https://gerrit.mot.com/2417652
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
ili9882_mmi:
Add last event time function, record the last touch event time,
used by phone back double tap.
Change-Id: I793f79111c8a154074fd99c343d14b09df7c036b
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2417920
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jing Hu <hujing3@lenovo.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Save chipid info into /proc/bootinfo
so that the phone's signed APDP can be produced accroding the known chipid info,
then request the phone to flash APDP directly.
Change-Id: Idfbdc8283708a6e45fb73b64021df977ec68da4b
Signed-off-by: zhongcai ma <mazc5@motorola.com>
Reviewed-on: https://gerrit.mot.com/2417057
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
focaltech_0flash_v2_mmi:
add productinfo node in touchscreen sys
to support touch chip id for TP primary node case
Change-Id: I10bc6f9b23310132f2e8230b5c5df68f8aa3b97e
Signed-off-by: hujing3 <hujing3@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2417687
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
nova_0flash_mmi:
kernel 5.4 and kernel 5.10 msm drm are different, so need use different
marco to control msm_drm.ko dependency.
Change-Id: I079e3fd3649dadbcb8bb6f427b6475587995b644
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2412213
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jing Hu <hujing3@lenovo.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
need report pen status after pen is enable
solve kernel panic issue when phone startup sometimes
Change-Id: I8ea796fc71ccdb5853e10e600e2093c9ee3fa3ab
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2409191
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqiu Huang <huangjq9@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
To be compatible with the next generation wireless charger
Add to support ask Tx id&sn from wireless charger
Change-Id: I9d2fb107e51cce7c4e18bc1b997a15f877453c68
Signed-off-by: Chunyu Fan <fancy3@motorola.com>
Reviewed-on: https://gerrit.mot.com/2403120
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
To be compatible with the next generation wireless charger
Add to support ask Tx Capability from wireless charger
Change-Id: Ib137027bfd5cbe9bbd6a9f44a44cfe67bbf06bf2
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2392470
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
ili9882_mmi:
Set fw ready flag as true when firmware download is complete.
Then pen can set its flag to touch ic.
Change-Id: Ib7866c831e906d65ca1d227acdbaa975b6401918
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2406397
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Details:
Closed the useless dump reg logs of wl2864c
If we need these logs, open the debug level log
Change-Id: Id7f94fc69569c83f38bedf96fc1a07bd9bf8002b
Signed-off-by: Simon C <chenzm8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2405622
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: <wangdp11@motorola.com>
Reviewed-by: <huqian4@motorola.com>
Reviewed-by: <hezheng1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
This new protocol supports touch high resolution,for example 8X/10X/16X,
but it's not compatible with previous protocol,so need use macro to control.
Change-Id: Ib9e8590cd3cf05ba88b83f33fab552909c2d9a5e
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2399367
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
vbat_shutdown_triggler may run again an again before poweroff really
excuted, it may cause a kernel panic. add flag to ensure
shutdown only excutes once
Change-Id: I1070a9eaef078fa15e01845e53022977ac559b0a
Signed-off-by: xuxj12 <xuxj12@motorola.com>
Reviewed-on: https://gerrit.mot.com/2401294
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key
Requeue the rx request in case of ether_open
or connection shutdown cases
make sure there is always requests available in the list
Change-Id: Ib3e5425b5fe3306df64594285e5717a1767fd275
Signed-off-by: William Liu <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/2399177
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
enable flip charge by echo 1 > chg_en, but chrg_stat flag need 200ms to
update in delay work. if a delay work is already runnning when
enable flip charge, it may disable flip charge immediatly cause factory
test flip charge current read err
Change-Id: Ib6fd330fb9f9bbd60157f6b16ec032f436056c33
Signed-off-by: xuxj12 <xuxj12@motorola.com>
Reviewed-on: https://gerrit.mot.com/2399491
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key
ili9882_mmi:
Don't use kernel_read/kernel_write for 5.10 kernel.
Use apk for factory test, so delete these functions are OK.
Change-Id: Ifccbb1dd37feec063affa0183c71fcdd427a700b
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2396131
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: <lvxj4@motorola.com>
Reviewed-by: Jing Hu <hujing3@lenovo.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Don't use kernel_read/kernel_write for 5.10.
Products use APK for factory test, apk writes result to csv file.
So it's ok to delete kernel_read/write.
Change-Id: Ib6671a3c7ca15468b99787f23359ddf2b58b525b
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2396128
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: <lvxj4@motorola.com>
Reviewed-by: Jing Hu <hujing3@lenovo.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
