This change is to identify RUMI specific console usecase. This
enables serial driver to manage additional change needed for
RUMI console.
Change-Id: I98c44346f5e561ab22d230cf73d1afd998fba0a5
Add regulator configuration for vref regulators so that LMH driver can
place a active only vote for lahaina.
Change-Id: Idadf2fbc0cdaa7f47cfd6b3cb23a1ccc0bdf73b9
Add a virtual sensor configuration to monitor the maximum temperature of
two GPU sensors and then mitigate GPU cooling device.
Change-Id: I14265fb06d453ae56a0dcf00ed37742139f71d68
Add BCL configuration to monitor battery current, level violation and
state of charge depletion configuration for lahaina.
Change-Id: I548cec77b1f1c64651cd1ecf7b25a4ed114830b0
Add CPU frequency and CPU isolation cooling device configuration. Add
thermal emergency mitigation configuration to mitigate CPU at high
temperatures for lahaina.
Change-Id: I2a168b279d883d8ee4644d5e1c269c9d76a25937
Add documentation about pdc interrupt controller node
and dt-bindings. This is taken from msm-4.14 commit
("aaa3cbba7c").
Change-Id: Id31d0b85cd2ccbe535e94595db7e60d3466d1fdc
Add snapshot of dt-bindings for arch_timer
This is a snapshot from msm-4.14 commit
("4da722ca19").
Change-Id: I065711e62ede9f46d81d46710c6ace3fd754a56c
Add compatible strings for Hana-auto platform, that includes
SoC, ADP, ADP star and ADP air entries.
Change-Id: I08ae7fb1afc8a467c14f83d241b1f30be595d10a
This snapshot is taken from msm-4.19 as of commit ed241f132720397
("dt-bindings: Add devicetree bindings to devicetree project") and
updated as needed.
Change-Id: I2fed806703bc459059aa7038a16cc212a31ac673
Add documentation for QPNP vibrator LDO HW module. The driver
registers to leds framework and exposes device attributes such
as state, duration, activate and vmax_uv.
Change-Id: I4cefc815ca0d9fb877d024d09ad20a29cb7e957c
Add the CX GDSC to the IOMMU node so that we can make sure that it is
enabled before trying to access IOMMU registers.
Change-Id: Ic0dedbad2410d2131dec75d54159f0fba0e3aa6d
Move the definition of the IOMMU clocks to the GPU device so that they
are identified with an actual platform device instead of a pseudo device.
Change-Id: Ic0dedbadaa12e748db585cf164ed5e4ea45c43c0
Add charger thermal mitigation levels for Lahaina MTP so that
thermal SW can set CHARGE_CONTROL_LIMIT property in battery power
supply for thermal mitigation.
Change-Id: Id06d9fc7c713ad2ef071491b15d6ae8f596599f0
Add "qcom,thermal-mitigation" property to configure fast charging
current for different system thermal mitigation levels.
Change-Id: Ia07b24d85d904e6e623ba547973f5a5779305784
Dummy clock nodes are required for clocks client to request, so add support
for the same. Also add the dummy GDSCs required by clients.
Change-Id: I5455dcc6825138c88d682235fcf6224ffdf5aa06
Enable haptics device node and update parameters according to the
LRA actuator installed on Lahaina QRD device.
Change-Id: Ica7b30122c0374a88d667052c48e5b124b7274e4
