TP:
Record the value of the received mode from system and the value
successfully set to the touch IC.
Change-Id: Ie10f25be6d0d9fe9d21cf385a626496cc9aedfa5
Reviewed-on: https://gerrit.mot.com/2144916
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Optimize turbo charging current
which can not reach 6A.
Change-Id: I443e9bb6ba5f051e7407fde26f611dd462de57e4
Signed-off-by: xuwei9 <xuwei9@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2146708
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
As bq25890H HW limit, some otg devices have high current pulse
when inserted. bq25890H trigger OTG OCP, so otg devices can't work.
So we config max boost current limit for bq25890H. For avoiding ibat
more than battery max discharging current, we add ibat monitor work.
Change-Id: If1d11fb47e26577055a181ea846c473f2cf73ec2
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2145129
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
some feature need to get current in real time
for rt9426a.
Change-Id: I28afc6471c771748db0edb7b8a433cfd9dc6c55a
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2146513
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
if the disable wakeup source is not avalible,
result the sleep state is not enter
Change-Id: Iaffb9bf70c574ce5dad5d1379be91159ef0e500b
Signed-off-by: qiurp1 <qiurp1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2145095
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jiyue Cui <cuijy2@lenovo.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Opensource exfat-linux driver provide better performance
Comparing with the existing Moto exfat-nofuse
It could support various kernel versions l(CR) 5.4/4.19/4.14/4.9
Original source :https://github.com/arter97/exfat-linux.git
version 5.8-2arter97
This commit also integrates almost all the exfat upstream
changes from kernel 5.8-5.16 listed in:
https://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat.git/log/fs/exfat?h=exfat-for-5.16-rc1
Change-Id: I7c0db070ee33be8f7f24a42f987b4e825d957998
Signed-off-by: a17671 <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/2137224
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xinmin Fu <fuxm1@motorola.com>
Reviewed-by: Chuanchun Zhu <zhucc2@motorola.com>
Reviewed-by: Xiaojun Ji <jixj@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
it should add device id detect before parse dtsi,
otherwise it will effect other fgauge boot time
Change-Id: If5d6e2de0a8783c40b4b60097baff1ffe3fa97e5
Reviewed-on: https://gerrit.mot.com/2144787
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
Control gpio switch and regulator of fingerprint according to
the configuration of device node.
Change-Id: I2c581df3a88cf02089f0e8edd9f45ea09715c2e5
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2132820
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Reviewed-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Initial driver implementation considered main batt would always be
higher potential than secondary neck batt, either through balance R
or flex resistive paths. To be complete, be sure to take absolute
deltaV between the two batteries. This will ensure proper batt switch
control for either battery being higher potential.
Change-Id: Ia6f64dcb5da4dcff6e8207570e1972ad43b99f5b
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/2141538
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
pull up and pull down intb pin when read version num
and update new firmware
Change-Id: I3e2cd65e96993e26206ea46301c133a8febc3771
Signed-off-by: huaqin87 <huaqin87@motorola.com>
Reviewed-on: https://gerrit.mot.com/2138669
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
TP:
Support film sensitivity function in RoguePRC project.
Change-Id: I830adb55e9b9b93aef6dc90d757ef9eaf206a2cb
Reviewed-on: https://gerrit.mot.com/2134201
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
1. If the interpolation mode is disabled, the report rate is the
default 240Hz(Hiphic) or 360Hz(Hiphi)
2. If the interpolation is enabled and the refresh
rate is 144Hz, the reporting rate is 576Hz(Hiphic) 720Hz(Hiphi)
3. At other refresh rate, if the interpolation mode is enabled, the
report rate is 480Hz(Hiphic) 720Hz(Hiphi).
Change-Id: Ibcd6ba61457e5e5f6fd32a6583f5bdcada531fc5
Reviewed-on: https://gerrit.mot.com/2134669
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
1.when plug the USB cable, charger policy will trigle to get POWER_SUPPORY_PROPERTY
For rt9426a fg getting power_supply_property vaule by read i2c data, that will
make i2c busy and affect the PD sink.
2.remove useless debug info
Change-Id: I2ebee58e1deb9e0d4eeb4d3fa01b731fc0385ffc
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2139569
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
