CDSPRM module implements a RPMSG interface to communicate with CDSP
while providing a way for CDSP to vote for CPU QoS to benefit CDSP
applications performance.
Change-Id: Ib2627e611b3d4e25f68b7ecee672d4a6474050c3
Acked-by: Sreekanth Gande <sgande@qti.qualcomm.com>
Signed-off-by: Bavyasritha Alahari <alahari@codeaurora.org>
Currently ipc_logging will capture the usb request's dma address but
when sg list is used usb request's dma address is not populated. This
change adds start_sg's dma address which is populated when sg list is
used for usb transfers. Also increase the number of log pages to capture
more ep events.
Change-Id: I36ada11429e168e2d3d09cf3427b1f3bcdacc285
Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org>
Refine driver's power on/off flow and make regulators' state
to be proper in all scenes.
Change-Id: I5d26c3134dfbdc53037fe4aac16739b24c0c183b
Signed-off-by: Fei Mao <feim1@codeaurora.org>
Align iova based on size for optimal performance before mapping.
Change-Id: Ic1d9a2125690f91ad3b15f7373683edb48d9f497
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
Set hw reset flag as done after sdcc hw reset else
hw reset as part of recovery happens only once.
md->reset_done flag is set inside mmc_blk_reset function with
flag MMC_BLK_CQE_RECOVERY. And this flag is cleared only
inside function mmc_blk_reset_success. But since mmc_blk_reset
and mmc_blk_reset_success are used with if else condition, code
flow can execute only one of the function, hence if mmc_blk_reset
is executed and not cleared within mmc_blk_reset_success, next
mmc_blk_reset call returns without resetting the hw.
Change-Id: I14915ae26240769b45cec8d2793e5f8604062eef
Signed-off-by: Ram Prakash Gupta <rampraka@codeaurora.org>
During cqe initialization, upon enabling cqe enable bit,
command queue engine gets reset. During hw reset this is
leading to SMMU fault as during reset tdl base register
contents are getting lost.
Restore cmdq vendor cfg register data post hw reset to disable
cqe reset post cqe initialization.
Change-Id: I8ffa2c2fa6754b697c4d441004efa4dc366bbf5f
Signed-off-by: Ram Prakash Gupta <rampraka@codeaurora.org>
Add support for gcc hw reset for sdcc. This feature would
help recover emmc host controller and card cleanly in case
software recovery fails.
This would also help reset hwkm key during probe for crypto
when called during probe.
Change-Id: I32c7fbfb1a97bb69924e1a0c6ea90a400dd35c43
Signed-off-by: Ram Prakash Gupta <rampraka@codeaurora.org>
First problem is we hit BUG_ON() in f2fs_get_sum_page given EIO on
f2fs_get_meta_page_nofail().
Quick fix was not to give any error with infinite loop, but syzbot caught
a case where it goes to that loop from fuzzed image. In turned out we abused
f2fs_get_meta_page_nofail() like in the below call stack.
- f2fs_fill_super
- f2fs_build_segment_manager
- build_sit_entries
- get_current_sit_page
INFO: task syz-executor178:6870 can't die for more than 143 seconds.
task:syz-executor178 state:R
stack:26960 pid: 6870 ppid: 6869 flags:0x00004006
Call Trace:
Showing all locks held in the system:
1 lock held by khungtaskd/1179:
#0: ffffffff8a554da0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6242
1 lock held by systemd-journal/3920:
1 lock held by in:imklog/6769:
#0: ffff88809eebc130 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:930
1 lock held by syz-executor178/6870:
#0: ffff8880925120e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0x201/0xaf0 fs/super.c:229
Actually, we didn't have to use _nofail in this case, since we could return
error to mount(2) already with the error handler.
As a result, this patch tries to 1) remove _nofail callers as much as possible,
2) deal with error case in last remaining caller, f2fs_get_sum_page().
Change-Id: I886e51597190332553b6a6bbd9fa474f4995bac6
Reported-by: syzbot+ee250ac8137be41d7b13@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Git-commit: 86f33603f8c51537265ff7ac0320638fd2cbdb1b
Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux.git/
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
If a channel is being rapidly restarting and the kobj release worker
is busy, there is a chance the the rpdev_release function will run
after the channel struct itself has been released.
There should not be a need to decouple the channel from rpdev in the
rpdev release since that should only happen from the close commands.
Change-Id: Ia4131151b7efb014716c5a0666f940384975ea42
Signed-off-by: Chris Lew <clew@codeaurora.org>
Surround vendor extensions with #ifdef directive to make them
available only for QGKI builds.
Change-Id: Ibea4847739e97e4ffd9ea97223c20f14aa53a967
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
If frequency update is not honored in cases where it matches to the
previous update, the previous policy update may be revoked any time
and desired performance may drop before the usecase completeion of
the current frequency update.
Change-Id: Ib626f04ecdd343b767c3e0609863a9b8d30f5187
Signed-off-by: Kishore Sri venkata Ganesh Bolisetty <bsrivenk@codeaurora.org>
Display uses RM owned MSGQ for lending mem and irq res handles. In
addition, display may need to communicate custom data between the VMs
based on the value added display features that need to be supported
while the trusted VM applications are active. This change introduces
the MSGQ dedicated for display to establish the communication channel.
Change-Id: I8d07a3eb8591364f245c37a947a9ba5457c46efb
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Enable PCI_QTI config flag to add QTI specific code to upstream
PCI driver for sdxlemur.
Change-Id: Ic17441714ac67c7965af43c59ff24cfef432ae6b
Signed-off-by: Tony Truong <truong@codeaurora.org>
Documentation/networking/ip-sysctl.txt:46 says:
ip_forward_use_pmtu - BOOLEAN
By default we don't trust protocol path MTUs while forwarding
because they could be easily forged and can lead to unwanted
fragmentation by the router.
You only need to enable this if you have user-space software
which tries to discover path mtus by itself and depends on the
kernel honoring this information. This is normally not the case.
Default: 0 (disabled)
Possible values:
0 - disabled
1 - enabled
Which makes it pretty clear that setting it to 1 is a potential
security/safety/DoS issue, and yet it is entirely reasonable to want
forwarded traffic to honour explicitly administrator configured
route mtus (instead of defaulting to device mtu).
Indeed, I can't think of a single reason why you wouldn't want to.
Since you configured a route mtu you probably know better...
It is pretty common to have a higher device mtu to allow receiving
large (jumbo) frames, while having some routes via that interface
(potentially including the default route to the internet) specify
a lower mtu.
Note that ipv6 forwarding uses device mtu unless the route is locked
(in which case it will use the route mtu).
This approach is not usable for IPv4 where an 'mtu lock' on a route
also has the side effect of disabling TCP path mtu discovery via
disabling the IPv4 DF (don't frag) bit on all outgoing frames.
I'm not aware of a way to lock a route from an IPv6 RA, so that also
potentially seems wrong.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Sunmeet Gill (Sunny) <sgill@qti.qualcomm.com>
Cc: Vinay Paradkar <vparadka@qti.qualcomm.com>
Cc: Tyler Wear <twear@qti.qualcomm.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
(Backported from commit 02a1b175b0e92d9e0fa5df3957ade8d733ceb6a0).
Change-Id: I26f336f891711f0149b2835d2c4a78fc8407b5ba
Git-Commit: 02a1b175b0e92d9e0fa5df3957ade8d733ceb6a0
Git-repo: https://kernel.googlesource.com/pub/scm/linux/kernel/git/stable/linux
Signed-off-by: Sauvik Saha <ssaha@codeaurora.org>
Add 5nm Combo and Uni phy macro definition file for
broader use across all 5nm QMP Phy device tree nodes.
Change-Id: I5791723981b3b7015e69d2dbc07e0cdd2d2a25c6
Signed-off-by: Elson Roy Serrao <eserrao@codeaurora.org>
Enable domain power in arm_smmu_map/map_sg. This is not required with QGKI
kernel due to downstream fixes. So limit the domain power enable only for
QGKI build.
Add config ARM_SMMU_SKIP_MAP_POWER_ON to limit this for specific targets.
Change-Id: I299666da1b812fc3dd06960e75ddd1fb08e9a8d0
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
