In fs_ready_store(), only dereference plat_priv pointer after NULL
check.
Change-Id: I222139d02a8cc8aef19e2ff879a953977896a08c
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Currently the driver requires pwr_evt_irq to be compulsorily
passed from DT unless the core is dual port. Now consider a core
that does not allow SSPHY autosuspend during operational mode,
instead allowing it only as a part of dwc3_msm_ssphy_autosuspend.
As soon as autosuspend is enabled, there is a chance that
pwr_evt_irq is fired with IN_P3 bit set. Although the driver will
be marking mdwc->in_p3 in the pwr_evt_handler, it will fail to
see IN_P3 bit to be set(because it has been cleared in handler)
during the 5ms wait time in the ssphy_autosuspend function and
prepare_suspend will again set mdwc->in_p3 to 0. This leads to
failure of runtime/system suspend.
Fix this by not passing pwr_evt_irq from DT for the cores which
disable SSPHY autosuspend.
Change-Id: I85ca7e45337fe35c570d163766e7638e11537201
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
F_FS function driver allocated ffs_eps and updates ffs_ep->ep
to corresponding usb_ep during func->bind and never clears it.
On bind it also saves ffs_ep context in epfile->ep.
During func->disable, it clears only ffs_ep context in epfile->ep
and on func->unbind it frees ffs_eps memory.
ffs_epfile_io routine currently relies on ffs_ep->ep (which is
never cleared and ffs_ep could be freed on unbind) to detect any
disconnect during active IO. This can result in various issues e.g.
use after free use of ffs_ep if unbind finished before epfile_io
could resume or "stop adbd" trying to dequeue a freed USB request
when epfile_io could execute only after F_FS got disabled as
'if (ep->ep)' check would be TRUE.
Fix this by checking stored ffs_ep context against latest epfile->ep
to figure out if endpoint got disabled or changed before acquiring
spin_lock.
Change-Id: I6bdcdf0dff0813ed7b2af8c24f544a22796b0369
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Porting the FDE functionality from msm-4.14 branch commit
<b8f1b6a6> (Add support for block disk encryption).
Modified to be compatible with the 5.4 Kernel.
Test:
1. Basic_SimpleEncryption.
2. ModifyEnforcedFiles_FileCreationWithinEnforcedFolder.
3. PIN, pattern, password.
4. Verified filename encryption.
5. Generate/set ICE keys.
6. Enable ICE state for userdata partition.
7. Format the userdata partition.
8. Check if partition is encrypted via ICE.
Change-Id: I307d75b7cdf25f7a9ad2b4f948e64d13278e6f03
Signed-off-by: Neeraj Soni <neersoni@codeaurora.org>
Signed-off-by: Victor Zaharchuk <vzaharch@codeaurora.org>
The version numbers shall be copied into the local variables for
any potential version comparison.
Change-Id: I08ac6359df0890a2605dbb6279b73abe09060ec8
Signed-off-by: Yong Ding <yongding@codeaurora.org>
The prink() could consume enough CPU when the retry eventually takes
a lot of times before it could succeed.
Change-Id: I4f49d0650ee3ae06700d2ce592acd0532bbf38cd
Signed-off-by: Yong Ding <yongding@codeaurora.org>
Currently power_role is accessed by set_prop and get_prop
functions of typec_power_role without any locking mechanism,
there can be a scenario where both function calls were invoked
simultaneously and power_role variable is not correctly
updated, and it leads to enumeration issues when connected to PC.
Fix it by adding locking mechanism to power_role.
Change-Id: I4f5dc38a9536b535510dc2b112712a5cbd2b3f84
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
Remove all the leading and trailing whitespaces in the string copied
from userspace.
Change-Id: I627416dcdb1155303ad6a8ed172910a8653dd67b
Signed-off-by: Jay Jayanna <jayanna@codeaurora.org>
On certain platforms, due to a HW issue, the SSPHY keeps
transitioning in and out of p3 whenever we perform any HS
transfers. This leads to a storm of PWR_EVNT irgs.
Fix this by disabling SSPHY autosuspend on such platforms.
Autosuspend will be enabled as part of dwc3_msm_prepare_suspend
so that SSPHY gets a chance to go into P3.
Change-Id: I4e674f780a72a8c4abcb3e6c9f083f23b1faa196
Signed-off-by: Aniket Randive <arandive@codeaurora.org>
In line with the sequence for primary port, update proper fields
of DWC3_GUSB2PHYCFG and DWC3_GUSB3PIPECTL registers for the
second port of the dual port controller. Update other registers
as required.
While at it, also avoid enabling SSPHY autosuspend if
dis_u3_susphy_quirk is set.
Change-Id: Ib79dba4c6d854fa2bf33a1b7cecf06f988250662
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Signed-off-by: Harsh Agarwal <harshq@codeaurora.org>
Certain targets may have a dual port capable host controller.
Add support for the PHY IRQs for the second port. Since the SSPHY
autosuspend will be disabled for such controllers, remove the
support of pwr_evnt_irq as a mandatory IRQ and allow SSPHY to go
into P3 as a part of suspend sequence. Handle the logic
gracefully to maintain single port controllers.
Change-Id: I5a53d6e23f64bec7ae940d23923df310309a28da
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Signed-off-by: Harsh Agarwal <harshq@codeaurora.org>
Add 2 new PHY instances (HS and SS) in dwc3 and dwc3-msm
structures. Probe and initialize them when the controller is
dual port capable. This capability is advertised by cores
supporting only host mode using the DT flag 'qcom,dual-port'.
Update PHY1 flags wherever applicable while maintaining single
port controller support.
Avoid workaround of SSPHY powerdown as a part of HS device
connect because of the known HW issue of the other SSPHY going in
and out of P3 when data transfers are being done.
Change-Id: If52fd6383cc2da8b763c774d2ad688448f90aea0
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Signed-off-by: Harsh Agarwal <harshq@codeaurora.org>
Download qdss cfg file at end of fw mem ready handler instead
of downloading cfg file after fw init done. Wlan fw expects
qdss mem req/resp from host before mode on request from it.
Wlan fw will wait for qdss memory sync qmi exchange from
host before sending fw init done to it to avoid receiving
qdss memory sync after mode on request.
Change-Id: If4e752c398821a5cdfeb1b5aeaf735f1973b5635
Signed-off-by: Sandeep Singh <sandsing@codeaurora.org>
