In Moselle, currently CE interrupts are not disabled from apps
side during ipci bus suspend, so adding changes to disable all
the CE interrupts except wake_irq during bus suspend and do the
symmetric inverse operation during bus resume, also drain all
the pending FW diag logs from copy engine.
Change-Id: Ib54fc6660fd81aff18787b0b699f3a6cd2d7803d
CRs-Fixed: 2879752
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for wmi related files.
Change-Id: Ie519ca7fac2d721f87a4c9bd11507cd83ddfb504
CRs-Fixed: 2895184
When country has not changed, reg_set_country will drop the request.
Return failure in this case so caller will know if no action is taken.
Change-Id: If6095887c6166edc626eab3bde312cc0aa8490b2
CRs-fixed: 2892356
For some targets, FW expects WMI_REQUEST_UNIFIED_LL_GET_STA command
always over QMI irrespective of WOW state. FW will crash if this request
is sent over WMI on those targets. Currently there is no direct way for
the host to identify this requirement by FW. So FW may crash when this
WMI_REQUEST_UNIFIED_LL_GET_STA stats request is sent over WMI.
To resolve this, add service bit support for LL_GET_STA request over QMI.
With this change the INI parameter send_ll_and_get_station_stats_over_qmi
becomes obsolete and corresponding code will be removed.
Change-Id: I43f2827a0b1cae6e75f1224f452f8277d53736b2
CRs-Fixed: 2847483
Check if Rx single msdu length including padding and tlvs length
is greater than Rx buffer size allocated to H.W and raise error
to catch out of bound access.
Change-Id: I7c70b8a0b6828f7fd88a19141f9087430085c13a
CRs-Fixed: 2873933
Add support for TWT AP params not in range and IE validation failed
status code.
Presence of num_additional_twt_params is enough to extract the additional
params sent by the firmware, there is no need for extra status check.
Change-Id: I9fa6afd22aa4de1b2a5b75fa98a00f89768dd8cf
CRs-Fixed: 2890682
There is possiblity of receiving fragmented packets just before
tid setup is done, so rate limit the tid not setup error log
to avoid excessive cosole logging.
Change-Id: I372d3904650fcbf2ad11313da1087da52a0d3dc6
CRs-Fixed: 2884897
Move ctrl_path_twt_stats related functions to appropriate source
and header files.
CRs-Fixed: 2871393
Change-Id: I7043259c102e5aee6cbb13260ce2bb0c53c17853
Avoid per packet Rx refill buff pool lock, instead
acquire/release lock for burst of nbuf's replenishment.
Change-Id: I778cb9702d31d4b8911cca4e7f06f12c50ef6df9
CRs-Fixed: 2884208
Need to protect prevent_suspend_list by runtime_lock.
Issue happens when
1 printing lock0 of prevent_suspend_list in thread0
2 thread0 scheduled out and lock0 is released.
3 return back to thread0, it will using lock0 pointer
to check next lock, then issue happens.
Fix is adding runtime_lock to protect.
Change-Id: I7182651e445cf5008dba73e15b2c261cc125577f
CRs-Fixed: 2883052
The host will send TPC power to FW via the new WMI cmd
WMI_VDEV_SET_TPC_POWER_CMDID going forward instead of
WMI_VDEV_PARAM_TX_PWRLIMIT to accommodate 6GHz channels.
But, to support backward compatibility for New Host+old FW
the TPC power will be sent to FW via legacy WMI cmds
WMI_VDEV_SET_PARAM_CMDID (during initial connection) or
WMI_VDEV_PARAM_TX_PWRLIMIT (power value change during RRM
req/bcn processing from connected AP) with the help of a
service bit WMI_SERVICE_EXT_TPC_REG_SUPPORT.
Change-Id: Iea1ecb62841c539c13a804ae9c475831b2d4c89c
CRs-Fixed: 2874250
The host will send TPC power to FW via the new WMI cmd
WMI_VDEV_SET_TPC_POWER_CMDID going forward instead of
WMI_VDEV_PARAM_TX_PWRLIMIT to accommodate 6GHz channels.
But, to support backward compatibility for New Host+old FW
the TPC power will be sent to FW via legacy WMI cmds
WMI_VDEV_SET_PARAM_CMDID (during initial connection) or
WMI_VDEV_PARAM_TX_PWRLIMIT (power value change during RRM
req/bcn processing from connected AP) with the help of a
service bit WMI_SERVICE_EXT_TPC_REG_SUPPORT.
Change-Id: I22e11ff847cd384fac8ea0061e5df42cea0c8de8
CRs-Fixed: 2874245
The host will send TPC power to FW via the new WMI cmd
WMI_VDEV_SET_TPC_POWER_CMDID going forward instead of
WMI_VDEV_PARAM_TX_PWRLIMIT to accommodate 6GHz channels.
But, to support backward compatibility for New Host+old FW
the TPC power will be sent to FW via legacy WMI cmds
WMI_VDEV_SET_PARAM_CMDID (during initial connection) or
WMI_VDEV_PARAM_TX_PWRLIMIT (power value change during RRM
req/bcn processing from connected AP) with the help of a
service bit WMI_SERVICE_EXT_TPC_REG_SUPPORT.
Change-Id: I727fd5a055e4e400ebc174cfb504d60e3335c3c4
CRs-Fixed: 2872244
Make the following changes to update Host Regdb to accommodate the
new 6G regdomains:
1) Add a macro COMPILE_REGDB_6G, to prevent compilation of
the new 6G regdomains in the host.
2) Add new 6G super domains, 6G sub domains, and 6G reg rules (add a new
structure regulatory_rule_ext) and place them under
COMPILE_REGDB_6G.
3) Add 2 new fields to the
struct country_code_to_reg_domain - reg_6ghz_super_dmn_id and
max_bw_6g. If COMPILE_REGDB_6G and CONFIG_BAND_GHZ are defined then,
reg_6ghz_super_dmn_id and max_bw_6g are part of the
country_code_to_reg_domain table for a country entry. If
COMPILE_REGDB_6G or CONFIG_BAND_GHZ, is not defined then they are
absent.
Change-Id: I72ba7b8f6fb4761205fbde51bbc8570bac531e87
CRs-Fixed: 2794085
Create a wrapper for the reg_is_freq_present_in_cur_chan_list API so
other modules can invoke it.
Change-Id: I0e21b15f1e08bb4301329b6b1a3c3c40edc09060
CRs-fixed: 2884768
When hif_force_wake_request is called from non interrupt context
use msleep to avoid mdelay since it is busy wait function.
Change-Id: Icda50e9d18b64369128a4f669ca1259931e5194a
CRs-Fixed: 2883178
QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO to get finer details on roaming
behavior, TSF out of sync count, and the latest TX rate, Rate Index used
for the transmission.
Change-Id: I34d112a263a587603f555069c0244f61dc44ec73
CRs-Fixed: 2876411
INI parameters parsing can fail because of fail to read INI file or
failed to parse at least one parameter. In some scenarios, driver should
assert if parsing is failed for atleast one INI parameter.
To differentiate these two failures, return different error status
values.
Change-Id: I187d2b2e8f55af47a14561302d8b62e84de7da5a
CRs-Fixed: 2878966
During multiple BSSID scan ie parse, there is memory allocation
on new_ie variable of size 1024 which may create buffer overflow
in util_gen_new_ie() if ie length is greater than 1024.
As part of fix, allocate memory of size ie length in new_ie.
And also add check before copying to pos variable in
util_gen_new_ie().
Change-Id: I55e0819817b5a616684067170bf28a314a145fc2
CRs-Fixed: 2867353
Currently driver is using sap notify api of regulatory to
update channel list for disable channel list command
which is not the correct way as sap notify api is designed
to be used by sap releted operations.
To address above issue write a separate api for
disable channel list command.
Change-Id: I79ded748bd46ec4be431c1ff6ab64c6ac8bf46be
CRs-Fixed: 2875324
Currently, reg rules are processed in the order of LPI, SP, VLP. The
order from halphy is SP, LPI, VLP. Update the processing order so
correct reg rules are passed north.
Change-Id: I5bb22a1dcd3f1c95d8f4498b03d6cc6eedcfe44c
CRs-fixed: 2874752
Add length check in scan beacon IE processing function for the below IEs to
avoid any possible memory corruption.
1. WLAN_ELEMID_COUNTRY
2. WLAN_ELEMID_WIDE_BAND_CHAN_SWITCH
3. WLAN_ELEMID_VHT_TX_PWR_ENVLP
4. WLAN_EXTN_ELEMID_MAX_CHAN_SWITCH_TIME
Change-Id: I860bee8633849215d46c2dfe60a1a98d7c80f510
CRs-Fixed: 2873039
Currently there is no mechanism in driver to decide whether
to consider the user configured number of sched scan plan or
to configure only 1 schad scan plan.
There is a requirement to configure only one sched scan plan,
add ini support to meet this requiremet.
Change-Id: Iea3bc3f18696837150ce6f4bd60416a8a45bd1d3
CRs-Fixed: 2868125
Refactor WLAN_FEATURE_PKT_CAPTURE_LITHIUM to WLAN_FEATURE_PKT_CAPTURE_V2
to remove hardware name from compilation flag.
Change-Id: I5a30b33d8bd6065d12e7c89c666c2f0cab66344e
CRs-Fixed: 2869827
Add delayed SRNG register writes support for Tx Ring, also add
dedicated workqueue to do the delayed Tx SRNG register writes.
Change-Id: I8dd157d341f3035e988804eab50d1ca681ab789b
CRs-Fixed: 2868989
Currently the return type of qdf_queue_work is void,
whereas queue_work return type is bool denoting the status,
so changing the return type of qdf_queue_work to bool,
helps to check the status of the function.
Change-Id: Ifd07923a18641790314b88d38a7eba2a73e498b3
CRs-Fixed: 2876197
Fw advertise big data stats in response of host
command WMI_VDEV_GET_BIG_DATA_P2_CMDID.
Add interface change to handle BIG_DATA_P2_EVENTID.
Change-Id: I906afb71eb7f6bf95cd967a69d56fa333ecae177
CRs-Fixed: 2848445
Add and initialize a preallocated pool of buffers which can
be used to replenish RX buffers. During replenish, the buffers
from the pool are used instead of allocating/mapping a new buffer
in the softirq context. This preallocated pool will be refilled
in thread context.
Change-Id: Idf3bd7d25c5d57ddba105ccd8fab672c26a184f1
CRs-Fixed: 2869345
Currently rx descriptor debug info API's are under RX_DESC_DEBUG_CHECK
feature, making those API's independent will be enabled with new feature
flag RX_DESC_LOGGING.
Change-Id: Iadb087f1b3104311b06e161bdeae975a8772e0ee
CRs-Fixed: 2869335
When switching from mission mode to FTM or Epping mode,
g_pktlog_pde is not cleared after de-init. When switching
back to mission mode, a warning is produced as the proc
directory is not found.
To fix this, g_pktlog_pde is cleared when pktlog is
de-initialized.
Change-Id: I1b9c9259c220a1981151dcb1e44a5621d7fd8204
CRs-Fixed: 2872045
Set SAP and P2P GO D3 wow host WMI resource config such that
FW is aware of host capability and can allocate memory for
sufficient remote peers.
Change-Id: I05499f98bd6bc080a9aefb302be12873bf19ac35
CRs-Fixed: 2869055
Reading extcaps from the scan entry currently checks if the byte
to be accessed is less than the length of the IE. Following this,
it will attempt to access the extcap IE using the requested byte
as the index.
Avoid accessing the extcap IE if the byte is greater than one less
than the ie_len (since indexing starts from zero).
CRs-Fixed: 2856212
Change-Id: Ie357edcd6095570c05871af657381c287e92504e
Host updates proper FILS param set i.e. username, auth_type and
is_fils_connection in the FILS response.
Change-Id: I0c30325bc7d620aa286aae0dd299dec9b26219ff
CRs-Fixed: 2865060
Extract btm response and initial roaming stats coming
from FW through WMI_ROAM_STATS_EVENTID event as
wmi_roam_msg_info_tlv_param.
Change-Id: I9a9b768d09a45ba70066cacb4aa420a90a39a76d
CRs-Fixed: 2826323
