This change is set the OT values for RT client of Camonc
to 8 for Yupik camera.
CRs-Fixed: 2924987
Change-Id: Icb7f30c23f5899558a41308fe313d46fd8d992a3
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
when provider crash occurred, there was a CSID lane overflow
observed due to shutdown sequence from CRM(sensor, csid, csiphy).
To fix the issue need to change the shutdown sequence
(csid, sensor, csiphy).
This change will update the devices sequence in order while registering
and close the sequence accordingly.
CRs-Fixed: 2852076
Change-Id: Ia6d8022e995823bf031400c33528eb8544dc2e29
Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
When camnoc fill level for RDI port goes beyond 25%, notify UMD
with BAD frames to take corrective actions.
CRs-Fixed: 2913934
Change-Id: I5427ce94cdd2a48d8647ff4593cb1605a2f90a37
Signed-off-by: Alok Pandey <akumarpa@codeaurora.org>
There is a possibility of composite groups in free dual
composite group list are not in sequential order. In case
of dual ife use case, if composite groups are not in
sequential manner then we landed into a scenario
where two different IFE with same resource have two
different composite group index, which is not expected.
This commit ensures if it is dual IFE usecase then at the time
of acquiring composite group, both IFEs have same composite
group ID for same resource.
CRs-Fixed: 2912721
Change-Id: I734d1d1660c1e70e0480e2dc0b8377a1c441c634
Signed-off-by: Shravya Samala <shravyas@codeaurora.org>
There is a chance that during acquire time while updating write master,
for few resources io buffers are not allocated. If Wm configurations
are enabled without receiving io buffers then there is a chance of
hitting page fault issues.
This commit takes care of enabling Wm configurations for each
client only if io buffers are allocated.
CRs-Fixed: 2887053
Change-Id: I868bd01dbd896dd86eeec4fc92a8a62e746f79cf
Signed-off-by: Shravya Samala <shravyas@codeaurora.org>
Validate active sequence id before clear bit. This avoid
invalid clear bit scenario if link is created but try to
deactivate with out link activate.
CRs-Fixed: 2909190
Change-Id: Ie12f6bb100e1e12c41b9addf516446f4088ae8a3
Signed-off-by: Ravikishore Pampana <rpampana@codeaurora.org>
For recovery of the bubble the request from active list
should be added back to pending request list.
CRs-Fixed: 2887188
Change-Id: I9bd14db82f96d2fda99bb542bd0df4c9c4a06745
Signed-off-by: Tejas Prajapati <tpraja@codeaurora.org>
Dump camnoc fill level registers for overflow and violations
along with the SOF, EPOCH and EOF timestamps.
CRs-Fixed: 2908055
Change-Id: I774140794eae6580f4332cd9cd39b8c65d7197a5
Signed-off-by: Tejas Prajapati <tpraja@codeaurora.org>
KASAN identified global-out-of-bounds issue on:
msm_cam_hw_cdm_dt_match
Due to no null-terminating struct in the array.
CRs-Fixed: 2883523
Change-Id: I36e4811f239993e1e6de158df959157217c28bfe
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
This change modifies regulator_get, regulator_put to devres entry.
Devres is linked list of arbitrarily sized memory areas associated
with a struct device. Each devres entry is associated with a release
function. All devres entries are released on driver detach. This
avoids potential leaking of resources on driver detach or having half
broken failure path implementation in probe call which would leak
resources when failure occurs.
CRs-Fixed: 2890861
Change-Id: Ibd46bc37bd6e31aeb2a5ea90ed75a1f596b57bf9
Signed-off-by: shiwgupt <shiwgupt@codeaurora.org>
If req#N in slot idx, and this req meets bubble issue,
then the req#(N+1) in slot (idx+1) may also be applied,
and its status is APPLIED. If req#(N+1) applies failed
after finishing bubble recovery due to some reasons,
but we still can move to next slot since the status of
slot (idx+1) is already APPLIED. This change resets
the status of slot (idx+1) to ADDED if it is APPLIED
during processing error.
CRs-Fixed: 2902809
Change-Id: I32f318569ad8f24fdf0f324603f4ea0036867e98
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
Sometimes, UMD reports nonincrementing shutter request id
issue during monkey test on sHDR usecase, isp reports last
one req in active req list during bubble, so if the active
req count is 2, we will meet this issue.
This change gets the first active req during bubble in case
the active req cnt is 2.
CRs-Fixed: 2885087
Change-Id: I67d1ecfe9c88123e6d0887383961bfc676455a0d
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
This change adds missing cdm debug status register
offsets for cdm version 1.0 that are read during cdm hang.
CRs-Fixed: 2898496
Change-Id: I3a83d13f6b18231561973054845cb87b1ffc4b2d
Signed-off-by: Chandan Kumar Jha <cjha@codeaurora.org>
This change is to support multi links in sync mode. Supports dynmanic
switching to select master link in rtb and sat use case in sync mode.
Supports sync logic for rtb and sat use case in sync mode. Apply
requests for all links is triggered only on master epoch.
Supports bubble recovery and sync logic for different pd links in
sync mode.
CRs-Fixed: 2783209
Change-Id: I81d1d0d37aa0d6e18c19ca87eac51ef3f160abfb
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
This change is to add horizontal and vertical binning if qcfa binning
is enabled. In qcfa binning, horizontal and vertical binning should
be enable along with qcfa binning, whereas for only horizontal and
vertical binning is required for bayer binning.
CRs-Fixed: 2890967
Change-Id: I096d170cfb7a4a725deaffe5dc3996b23070040f
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
Apply the flash at EOF and apply the other devices
at the EPOCH of next frame, then the flash can
cover all the exposure zone of current request.
Add the inject delay for SOF and EOF separate, then
we can use inject delay for more flexible frame
skip control.
CRs-Fixed: 2820683
Change-Id: Ic6a58327a0ae44c54190884ba42ea7926ec7c90e
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
PHY status dump analysis need to be done to check issue
with transmitter when SOF freeze occurs as recommended by
PHY HW team.
CRs-Fixed: 2890861
Change-Id: Ibaabe1c7e5968aa384313619e8a21f589f1d880e
Signed-off-by: Shankar Ravi <rshankar@codeaurora.org>
While csiphy is shutdown abnormally, we also need to
program off csiphy hw common register, to avoid the
residual of active csiphy hw cnt during monkey test.
CRs-Fixed: 2861912
Change-Id: I1767c729b205a96e5f298265e65b37150dac03b6
Signed-off-by: chengxue <chengxue@codeaurora.org>
This is a fix to handle line corruption on RDI stream by giving more
priority to IFE traffic. This is specific to SHIMA CAMNOC.
- Set Priority for IFE (RT) stream to P6.
- OT = 55 for IPE RD.
- IPE clk to be capped to SVS.
CRs-Fixed: 2887253
Change-Id: Ica574742052f018e94072240a0fd1d08be223727
Signed-off-by: Alok Pandey <akumarpa@codeaurora.org>
Allocate memory for flush req array dynamically based
on the list count, in case the req count bigger than
the size of req list.
CRs-Fixed: 2835525
Change-Id: I7e48fb9dc7815cb991c84195e761a3c3f1c26b48
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
