Currently, for every pre CAC request a new vdev sync is getting created
and it will be destroyed only when SAP is stopped. So, there is a possible
memory leak if a valid pre CAC request is issued second time without SAP
stop.
To avoid this, don't create vdev sync for pre CAC request if pre CAC
adapter already exist.
Change-Id: If3f65648645b6801a1504a2d184dbc6928ff4771
CRs-Fixed: 2891360
Currently, the regulatory update event is created in
hdd_regulatory_init. In some cases, the country can be set before this
function, causing a crash. Move the event creation to before the country
setting logic.
Change-Id: I344d0de71f1983b3da7b47b816d6bbb0e402cbe8
CRs-fixed: 2891434
Add support for TWT AP params not in range and IE validation failed
status code.
Change-Id: I939db5388c4e7aac86484b319638a57baf83171e
CRs-Fixed: 2888847
TWT responder support should be announced, if enabled, in the
Extended capabilities IE.
Change-Id: I1355a9ddf2fe0361cb542b4c49b754d8f8a158fc
CRs-Fixed: 2884862
Currently, in TWT after posting the msg via sme to WMA
using scheduler thread. Based on the success or failure
driver set the command_in_progress so that subsequent
commands can be rejected till the current command is completed.
There is a chance, context might be broken because of this,
command_in_progress is not set.
Set the command_in_progress before posting
the msg and if there is an error then again set the
command_in_progress as NONE.
Change-Id: If9dc4bd346178d49d5d940ecf8ae008969cb1e73
CRs-Fixed: 2886135
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for file wma_scan_roam.c.
Change-Id: Ib50d49c566d9aaf124f2eecebe4b652dcbb3b5df
CRs-Fixed: 2807015
Currently, WoW wakeup host event is handled in tasklet context and
it is taking more than 800ms to execute. This is due to excessive
logging to the console from the tasklet. As a result of this, IRQs
are getting blocked during this tasklet execution.
To avoid this, add a sysfs entry to enable/disable console logging
from host wakeup event based on requirement.
Change-Id: If91a8bd5f783f358dabf9dcf46bf4c50d05d7909
CRs-Fixed: 2881972
When SSR happens, Inform the user space about teardown all TWT sessions
in P2P client mode also.
Change-Id: I190529724519a2520dfa190fcb10cafc398745a5
CRs-Fixed: 2879404
Currently, there are two ini option 0/1 to disable/enable ILP
profiles in HW.
Extend this option upto 3 where
0 indicates disable
1 indicates perf settings
2 indicates max power saving
3 indicates balanced settings
Change-Id: Iff41b92b84309a670e2ad301ee72fb3caaba3df3
CRs-Fixed: 2886526
As part of devices recovery, driver sends disconnect event
indication to kernel for all the interface but kernel does
not expects for NAN interface due to which frequent call trace
observed during NAN test.
Remove disconnect event indication from hdd_start_all_adapters()
and move this logic under SSR.
Change-Id: Ifa62a58264fa7c7247f8c0aa8f0ed33138572dd8
CRs-Fixed: 2848186
When the country is being updated via WMI, FW responds with a channel
list after some time. During this time, another event can come, blocking
the channel list from being updated. Add synchronization so that these
requests are blocked until the channel list is updated.
Change-Id: I4c1b7d33242226b8153821fdc14db54fff764c17
CRs-fixed: 2884840
During suspend if the netif queue pause failed for some reason,
network stack may send the pkt for hard_start_xmit and will
crash due to device is in suspend state, so adding a check to
drop the pkt if device was already in system suspended.
Change-Id: I5b8f5511157f10e28297be4366fafe6e683c392b
CRs-Fixed: 2880892
While processing the roam synch indication reassoc response frame,
the new roamed peer object is not created. So call to
mlme_set_twt_peer_capabilities() to update the new peer capabilities
will fail with null peer object for new bssid. So after roaming,
update the peer TWT capabilities once the new peer object is
created.
Update peer TWT capabilities to new peer object after roaming to
avoid invalid peer capabilities.
Change-Id: Ic37bd4d96bf122b2ec3a60c1ae41650a672b9020
CRs-Fixed: 2870589
Introduce HE cap IEs in addstareq. Also, Add
HE capabilities in frames for TDLS Setup Req,
Setup Rsp, Discovery Rsp. Add He Operations
in TDLS setup Confirm.
Implement APIs under feature WLAN_FEATURE_11AX
which will be used to:
1) Fill HE capabilities in TDLS Discovery Response,
TDLS Setup Request, TDLS Setup Response.
2) Fill HE operations in TDLS Setup Confirm.
3) Convert he_capa capabilities from station
parameters to tdls tDot11fIEhe_cap type.
4) Set Chan width based on session, peer
capabilities.
Change-Id: If36b1a3c3eed0e6026043494a097673f9d74b580
CRs-Fixed: 2883443
Update the logic to fix a potential memory leak when there is an
invalid country IE. Also update the logic to not reject the connection
in the case of an invalid country IE, since this is a bad user
experience.
Change-Id: I6a2b50a483e65554a6622dccbb0bac61331fc4fb
CRs-fixed: 2883385
Fix the PSD start freq calculation for sap case.
Also, remove duplication of 6ghz freq checks in
tpc power calculation api.
Change-Id: I5f1773b551ff7b893514b5c7720c6684fc100077
CRs-fixed: 2879460
Call TPC calculation API from lim_handle_add_bss_rsp i.e.
after receiving vdev start response from FW.
TPC calculation API was called from lim_mlm_add_bss for SAP
and since this was happening before host received vdev start
response, HW limit for power from FW was zero and it
affected TPC calculation.
Also, API to check psd power flag for 6ghz returns true for
5ghz channels, so modify it to call under 6ghz channel check.
In TPE IE, max_tx_power_count values is one less than
num_pwr_levels so add 1 to count before assigning it to
num_pwr_levels for 5GHz TPE, non-PSD case.
Change-Id: I7e2ca0b6cf6c54528ade6263a87459e2c21098b2
CRs-Fixed: 2877654
Host will send TPC power to FW via new WMI cmd
WMI_VDEV_SET_TPC_POWER_CMDID going forward instead of
WMI_VDEV_PARAM_TX_PWRLIMIT to accommodate even 6GHz channels.
But, to support backward compatiiblity for New Host+old FW
the TPC power will be sent to FW via old WMI cmd with the
help of a service bit.
Change-Id: I9324299ca4f92f2adce92983385b66c04368fe55
CRs-Fixed: 2872238
Validate and process the country IE from the beacon frame.
Validate and process the TPE IE. Store the tx power values in the
vdev_mlme struct for future processing.
Change-Id: I57acca2257a263225d9bafb0f94e195a99224a60
CRs-fixed: 2841732
Add new lim api to calculate an array of tx power values. Include
hw limit from Fw and TPE values from IE along with existing
params to determine TPC power.
The new struct reg_tpc_obj in vdev_mlme object will contain max
tx power, center frequencies, number of power levels,
PSD power check, EIRP power, AP power type for 6G and TPE
power values and will be sent to FW via new WMI cmd
WMI_VDEV_SET_TPC_POWER_CMDID.
Change-Id: I80a2454c2ef0dbc3b1d69e8b233b1a56567ec1a1
CRs-Fixed: 2841873
Parse reg_info subfield present in he_ops IE from beacon on
6GHz channels to obtain AP's power type for STA.
In case of SAP, get the AP power type from SAP decision
engine and populate it in dot11f API.
Change-Id: Iec317ea35936e7a5c2372d1188fe5940afb0c28d
CRs-Fixed: 2869367
Re-write TPE IE populating code. For 6ghz AP, there can be multiple
TPE IEs.The TPE IE can be of type PSD or non-psd.
Change-Id: I029d4826cbc73abb382d885260c355217b2cc6b4
CRs-Fixed: 2863009
For SAP, country IE takes different input for 6ghz channels.
for 6 ghz, we need to add operating class triplet also. So, before
the sub-band triplet, operating class triplet needs to be added.
Change-Id: I43d37d0f23276dbe7fed35d8c2251d9e15b16fa9
CRs-fixed: 2862999
When the TPE IE comes to driver, there could be information for both
local and regulatory. Add an INI for preference in the case that both
sets are present.
Change-Id: I4b37123569f422863fc805063974c65878a9baea
CRs-fixed: 2854774
