Modify the size of SID's passed as an argument during
scm call as per client requirement.
Change-Id: I84bbd1e034ba6dcd8ded1ddf3913a735a2139663
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Currently driver reads CTL status register before checking
pending kickoff counter. This can lead to a register access
violation when there is a race condition between the ESD and
commit thread.
This change checks pending kickoff counter before reading
CTL status register.
Change-Id: I5828b580c16d075df19eb349ee88d8b7da47941e
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
This change disables sending idle notification if system
cache is already enabled. If system cache is enabled it
establishes that driver has already send prior
notification and no configuration change was requested.
Change-Id: I1aee002ab3c8c3d4193a8e7a4890d8e4f24da804
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change fixes the vblank wait after system cache read mode
update. Without this change the wait does not happen since there is
no pending kickoff. This change uses encoder api to flush the
configuration and explicitly waits for vblank.
Change-Id: I8942f9b638e784c8fd9b5df33a9ccc7087a5eaef
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
DRM encoder can be NULL during modeset concurrency, so add this
change to check drm encoder and only wake up display when drm encoder
is available.
Change-Id: I50dd85eb39567aba4895dc19801020d7ead841b8
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Add event to event_list after msm_register_event is successful to avoid
use-after-free vulnerability.
Change-Id: I144ae82c657c1e2cf16608c0e8768b12a7d27974
Signed-off-by: Ping Li <pingli@codeaurora.org>
All sde crtc's are virtual when they are created. Resources for the crtc
is allocated when crtc is enabled. All crtc's will not have same
capabilities because some of the dspp blocks have additional hardware
blocks. Change exposes additional dspp capabilities dynamically when
crtc is allocated the dspp hardware block.
Change-Id: I93e76a1335574e4ca30d9419ef6cc6e8149e2c3c
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
This change updates misr checks so that misr can be
configured during secure display session. In the current
code, misr_reconfigure flag is set only when accessing
through debugfs node.
Change-Id: Ic3a8316a4881551da3f0f340f6ef5ae3fbe4913f
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Enhance logging in dp mst functions by adding connector ids to
better identify operations for different streams and add more
trace logs.
Change-Id: Iaf5c67105c7af82fc5118674ddde5aef2319a611
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Allow for overriding color processing features that normally uses
DSPP flush to use LM flush instead. This is required on targets
where some of the DSPP features have been tied to LM flush bits.
This changes adds a field in color processing node to track if the
override is needed and enables LM flush override for rounded corner
on target requiring it.
Change-Id: I584bd7b20dfc9fc7795b1b3b10e2f17a82945ce4
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Trusted VM adapts splash handoff path to acquire the same
set of HW blocks the tui display was using in the primary VM
before switching out.
To use the splash handoff path, Trusted VM should add an
additional vote to the PM so that refcounts will be remain
balanced after the splash path cleanup at the completion
of the first valid commit.
This change adds the needed vote and as a result cleans up
explicit voting from trusted vm commit paths.
Change-Id: I9eb33c364f1dfb4205547a8353f57b73c68b8af3
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Add changes to reserve dsc blocks by routing even numbered
dsc encoders to even pingpong blks and odd numbered dsc encoders
to odd numbered pingpong blks.
Change-Id: I9242b3f7a2784194f9e4a7d30eff6ae3ec16b196
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add NULL pointer checks, before accessing the controller node.
Change-Id: If24c4fd4352ef5ab7642c817ddaa61a80b725c99
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Fix the check for uneven split across LMs when destination
scaler is used and reject the use-case since this is not
supported by the driver. This can happen if an odd-value
for the horizontal width is being split across 2 mixers.
The existing check was broken since it uses pass-by-value
with a zero initialized value that callee tries to update
while iterating over the DS configurations. Use pass-by-
reference with the previous DS configuration, if available,
instead of just 0 values so the proper comparisons can take
place.
Change-Id: I529faf57e43fb471b28b4d222260ea4d37217d4d
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
A new status register was added in DPU 5.x to INTFs to allow for
confirmation when the timing engine is disabled. This
functionality was controlled via an overloaded feature flag
which is used to enable INTF tear-check ops (also added in DPU
5.x). External displays support INTF_STATUS but have no use for
any tear-check functions. Separate these features so they can be
enabled individually on the interfaces which support them.
Change-Id: Ib8548619cb58bf19b7c02211ead7f33f52ffeae4
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
In current driver, during system cache read mode update control flush
is invoked and there after commit thread is allowed to pick up next
commit. This can lead to improper frame flush and cause hangs or
underrun. This change add a wait till frame done after system cache
update to frame read mode.
Change-Id: Ic88e0bdbaaa1f45f825d40ecde4de9e8dea2efef
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
This change programs rotator sid value irrespective of
continuous splash since it is not configured from
bootloader. It also handles trusted vm support
to prevent accessing mdss hw register.
Change-Id: I80e286364286457545dfa236d629447241d98f95
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
A mode switch on a real monitor can be triggered by forcing the new
mode using debugfs and initiating an hpd_irq. Due to a missing
check for simulator state, the current driver calls the hpd_irq
callback for simulator even for a real monitor. This change adds
this check.
Change-Id: I13480eccd27eac2f9df3dd766d0445c0a5ea9b2c
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Introduce event logs for lutdma kickoff operations to make
LUTDMA usage more apparent in crash dumps. This will aid in
debugging and triaging LUTDMA issues.
Change-Id: I81b570dfc21b03627cdaf5d9693b786839716571
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Add hooks to dump LUTDUMA debug bus status during dumping
of system debug status. LUTDMA debug bus can be accessed
from userspace via the "recovery_lutdma_dbgbus" debugfs node.
Output control of the LUTDMA_dbbus is managed by the
"reg_dma_dbgbus" node.
Change-Id: Iea011279dd3806f0f594102ce7a5dc018a8d2b7c
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
This change allows dynamic refresh trigger to sw trigger
and mdp intf flush. With this we can make sure that DSI
timing/clock update and mdp intf timings are updated in
one vsync.
Change-Id: Ic807f498e2e47be6dd0f1e11ff1fc0896a8ec758
Signed-off-by: Vara Reddy <varar@codeaurora.org>
DP MST driver registers bridge callback functions with the DRM framework.
mst_lock is used for synchronization of the mst bridge functions. These
functions call into dp_display where a session lock is obtained for
the display. HPD callbacks, on the other hand, are first handled by
dp_display. During these callbacks, dp_display takes a session lock
first before calling into DP MST driver layer. Currently, the DP MST
layer waits on mst_lock which can result in a deadlock.
This change removes the usage of mst_lock inside hpd callback functions
and just uses the session lock for synchronization.
Change-Id: I7ec338004eef43ac0f1e1f092463e9915cd60684
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
