Remove redundant message length check.
Truncate message immediately if its length is over MAX_LOGMSG_LENGTH,
so that can remove min check between true length and max available length.
Change-Id: I7e6c61021316a727e04dbb9671947b6413c27af3
CRs-fixed: 2229210
Change Tx Power for 2G regdomains MKKA and MKKC to 23 dBm.
Also change TX power for 5G regdomain sub-bands for MKK5 and
MKK11.
Change-Id: I32337fea35f350b2171b6d0a242934f0668d4f5e
CRs-Fixed: 2229597
Number of AP TWT and AP TWT stations are added in
target_resource_config to provide the configuration for TWT.
Add support in WMI to provide appropriate defaults for TWT.
Change-Id: Ica91f981d59a015b0b4cda41ba951b6ba22e8120
CRs-Fixed: 2212667
While doing RX NSS statistics counting, only MU_MIMO and MU_OFDMA_
MIMO frames are taken into consideration. So all NSS counter for
SU frames are missed.
Add RX NSS statistics counting for SU frames.
CRs-Fixed: 2228332
Change-Id: I5ee9b8f03177d31f5891a2e4e616b5740fec35f6
Make sure to clear the tx_desc->flags field before putting the tx_desc to
free pool. This was not takencare in V2 flow_control implementation.
Change-Id: I666b9b09de62d52cffc45e2b6db3a6be06d688e8
CRs-Fixed: 2186884
Add get channel width from phy mode API which will be used by
ndp schedule update event.
Change-Id: I13d00c0b818eb0da434c8a5372b2ab7b6693f22a
CRs-Fixed: 2216801
Re-factor vendor event buffer length calculation for NDP events
to a separate function call.
Change-Id: I6828067d0e81987d7c903fd7f7df05b3a4eadbe3
CRs-Fixed: 2183658
In flow control V2, dp_tx_flow_pool_vdev_unmap marks flow_pool_id as
INVALID_FLOW_ID. To free descriptors inside pool dp_tx_desc_pool_free
uses flow_pool_id to get hold of pool.
Change-Id: I892052055b34638a1ba876fac6bfcd2ae3b0d5b3
CRs-Fixed: 2228943
Define ucfg api to free stats_event, since it will be called from
osif and hdd.
Change-Id: Ifeea3e970ddca1ed508960c39a2a39f0ed755bd9
CRs-Fixed: 2231150
Add API to get NAPI instance from NAPI ID. Handle to NAPI is required
for Rx processing via GRO.
Change-Id: I15535827a03953231670d4138235c4876b16e045
CRs-Fixed: 2062180
Initialize the peer map and peer hash memory based on the config
received from target in service ready event
Change-Id: I8e1b62cd9586f5b2be7acb863a106d2486be1b35
CRs-Fixed: 2223428
a) Configure RXDMA_MONITOR_STATUS to support mpdu_start.
b) Need Monitor other filter in RXDMA_MONITOR_STATUS
to support monitor vap.
Change-Id: I7ac90203f085850906f8c55209a57bb6a5464098
nbufs received on wbm_release ring were chained based on
first_msdu and last_msdu bits if the peer is invalid for these
frames, but these fields in the rx tlv header were in-correct as
hardware does not decap these msdu's.
Based on inputs from firmware we now changed this logic to
using phy_ppdu_id field from the rx_mpdu_start tlv & rx_attention tlv.
Change-Id: Ifc7faa2d1b0585bcc226e5cb2045fcb29d152273
Change data packets printing to one line
Add msdu-id to TX packets
Increase data packets size to include the complete IP packets
Indication/print when the throttling occurs
Change-Id: I07fc664ea08bc8746e31260599c5892701ae52e7
CRs-Fixed: 2157769
This reverts commit Idb59f83edc09f9be8bf0bd231b8eb6ff28f37fd4.
nbuf was set to NULL and then deferenced.
To address the issue validate nbuf before processing in dp trace function.
Change-Id: I464c0dea36c0288c4bb01d6fba5255169d7ec255
CRs-Fixed: 2220892
Fill htt msg length before the htt stats response
handler so that the wifistats tool can read the
htt msg data correctly.
Change-Id: I544d1b97c8d74a0115a4a5a509780a6e9c273ab7
CRs-Fixed: 2231948
When SWBA event is enabled, the FW will sent an event to the
host on every TBTT beacon.
Note that, unlike the legacy offload chips, this event is not
used by the host to send out the beacon frame itself.
Change-Id: Icf4440d79f7dbfb544f9d98c4de0e84bdb150459
CRs-Fixed: 2200805
Update function prototype of dp_ppdu_stats_ind_handler. It should be
same when WDI_EVENT_ENABLE is defined and not defined.
Change-Id: I390d35b3b9f5f283fc3b960f00563fb997ef7f95
CRs-Fixed: 2230955
In some environments its found that IE's received are not
as expected and console gets flooded with pare failure prints.
Move these prints to debug level.
Change-Id: Ic25bdff65f340f47179a7ac6dd79731b80c805ff
CRs-Fixed: 2232553
Change ce_service_max_yield_time ini to us granularity to have
yield time of us order as well.
Change-Id: Iae31be810dd42273a4f0546ba2b76e89e23b9329
CRs-fixed: 2086190
Add API to set ce service max rx indication flush num
during load time for handling of messages in CE based on
ini configured one.
Change-Id: I49c3d6ebac34076cd5ad5e352e78d2fec7c8ee89
CRs-Fixed: 2068375
RSSI values are reported in 1/2 dBm steps for spectral HW gen III.
Convert the RSSI values to 1dBm scale.
CRs-Fixed: 2231546
Change-Id: I30962a95ba7a5f759d933e373c2b8708a98712fc
Module param capabilities stored per module per pdev and overall
target dbr ring capabilities allocated and stored during service ready
are not freed during detach.
Fix above mentioned memory leaks through below changes
1. Free module param capabilities allocated per pdev during ring deinit
2. Free DBR ring capabilities allocated during service ready event
as part of target psoc info free.
3. Free DBR entries allocated per event received from target
Change-Id: I93d5126063d3fa0094e15d57a75f03cf63b3c494
CRs-Fixed: 2228428
CCMP and GCMP both have different lengths of their MIC part. MIC
length for CCMP is 8 bytes whereas it is 16 bytes for GCMP. When
encryption type is GCMP/GCMP-256, sending packets with CCMP MIC
length causes fw to drop the GCMP encrypted management packets
leading to connection issues.
Add macros for GCMP header and MIC length
Change-Id: Ib768319d38dca90d92ff99ad3318a70f5a6ae474
CRs-Fixed: 2226978
Added NL80211 testmode if directives to enable compilation when not
supporting the feature.
Change-Id: I00b8d982035b78f5893bd1bec79309c7ffa48d05
CRs-Fixed: 2231059
Add APIs to set/get ce service max yield time and update
max time taken in NAPI poll from the driver load time.
Change-Id: Idfd4a271ce13916f188c92ab3af32e1648f48c95
CRs-Fixed: 2055082
Check key valid for get key api.
return key only if it is valid and return NULL is key
not valid.
Added new api to get key type
Change-Id: Iae29366ff7d8f60e26a5a87c79119d9649c7a255
Crs-Fixed: 2204858
Spectral module gets the noisefloor value from the meta data
info send by FW through direct dma framework. Copy the noise floor
value to SAMP message.
CRs-Fixed: 2219818
Change-Id: Icbd146875be668cdb99be20264e931040b670d5b
Add option to ignore vdev_id match to peer hash lookup API
when vdev_id is passed as 0xff to the API, it ignores vdev_id
argument
This option is needed for usecases like peer level statistics
display where only MAC address is known and vdev_id is not known
Also add the missing accounting of rx broadcast frames in the
overall statistics
Change-Id: I9939ac8bf30f6be3d216f9aa28d52560bf445e06
